Introduction MXR-B2 series (also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Applicationcompatible for Mazda 6 2003-2006 GG 4-door sedan compatible for Mazda 6 2003-2006 GG 5-door liftback compatible for Mazda 6 2003-2006 GG 5-door wagon compatible for Mazdaspeed 6/ Mazda 6 MPS2005-20074-door sedan Specification Top mount: Front pillow ball Damping: not available Spring rate Front: 9 kg/mm (504 in/lbs) Spring rate Rear: 9 kg/mm (504 in/lbs) Adjustable

Height: lowering 1-3 inch Shock type: Twin tube Spring Preload: 7-10 mm
Colour: gold body with black spring Package includedfront complete coilover assembly rear springs & spring adjusters & shocks A pair wrench for height adjustment Dimension Package dimension: 63*51*21 Weight: 25160g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2. Pillow ball top mounts improve the steering feel & response. 3. Twin-Tube structure allows sufficient stroke within the shock absorber. 4. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 5, Separate height adjustment does not affect damper stroke & height can be adjusted with coilovers installed on the vehicle. 6, Steel shock bodies with special surface treatment to improve the durability. 7, Full rebuildable Warranty: one year warranty for any manufacturing defect




...

Application Compatible for Ford RANGER 3.0 TDDI TDCI2006
- 105/143 WLAA compatible for Mazda BT-50 2.5 MRZ-CD 2006
- 105/143

...

Application Compatible for Mazda CX-72.3L2.3L Turbocharged Model 2007
- 2010 Turbo Model: K0422-582OEM/ Part No.53047109904, 53047109907,
...

Application Compatible for Mazda speed 3/ Axela with DISI MZR Engine 2005-10, Compatible for Mazda speed 6 with DISI MZR Engine 2005-10, Compatible for Mazda CX-7 European Version with DISI MZR Engine 2005-10, Compatible for Mazda 6/3, CX-7 (European) with DISI Engine 2005-10, OE/ Part number 53047109905, 53049889905, 53047109901, 53049889901, K0422-882, K0422-881, L3K913700E, L3K9-13-700E, L3M713700C, L3M7-13-700C, L3M713700G, L3M7-13-700G, Specification Turbine Inducer wheel Diameter：49.9mm Turbine Exducer wheel Diameter：44.5mm Compressor Inducer wheel Diameter：44.9mm Compressor Exducer wheel Diameter：58.8mm Turbo Model: K0422-881, K0422-882 Engine Code: DISI MZR, DISI NA/JPCooling Type: Water+ Oil Cooling Bearing Type: Journal Bearing/ Floating Bearing Thrust Bearings: 270 Degrees Hosepower: 191 kw/256 bhp Actuator Type: Vaccum Actuator Turbo Type: Individual Universal Fitment: no Finish: no Condition: 100% Brand New Accessories: You will get what you can see in the pictures exactly Package
Size:26x 24 x 23cm Package Weight: 7300g Package included 1x Turbocharger 2x Flange Gaskets 4x Oil/water Port Gaskets Feature* Product Material 1. Turbine housing ： Ductile iron QT450-10- temperature resistant up to 700℃2. Steel turbine wheel：K418 alloy -highoxidation stability & resistanceupto 900℃3. Compressor housing：ZL104 aluminum with lightweight 4. Compressor wheel： Cast aluminium blades – superior air tightness & corrosion resistance* Product Performance 1. OEM-quality & size with little modification 2. Rich experience in turbo production & own factory 3. High-Speed oil seal ring & Precision clearance* Technology Advantage: 1. 100% balancing Test by TURBOTECHNICSVSR32.G3-min-Flow VNT Turbo testing 3. Advanced Actuator Tester/ Programmer Note* Please confirm your original turbo PART NUMBER before Purchasing* Professional installation is highly recommended * Before installing the new turbocharger, the cause that led to the failure of the turbo must be analyzed & eliminated (e.g. insufficient oil supply, foreign bodies in the intake area, crankcase ventilation without function, etc.)! Warranty: one year warranty for any manufacturing defect
...

Introduction Looking to boost your car's horsepower? Is your car's original turbocharger not performing well or need replacing? Maxpeedingrods stocks all the best OEM-quality turbochargers & turbo parts to give your car the power, performance, & reliability you deserve. Maxpeedingrods aftermarket replacement turbos provide the perfect solution by delivering a high-quality turbo at a budget-friendly price. Application Compatible for Ford Ranger 2.5L D HS 1999-2006 Compatible for Ford Ranger Double Cab 2.5L D WLT 2004-Compatible for Ford Ranger Double Cab 2.5L D J97A 1999-2003 Compatible for Mazda B25002.5L 115 J97A 1996-Compatible for Ford Courier WL-T 2.5L Diesel Compatible for Mazda Bravo WL-T 2.5L Diesel Turbo Part Number & OEM Number WL84, WL85, XN349G348AB, WL84.13.700, WL8413700，VJ26, VJ33, VA430013, VB430013, VC430013, VD430013, VE430013, VF430013, VA430089, VB430089, VC430089, VD430089, VI430089, VA430090, VB430090, VC430090, VD430090, VE430090, VF430090*HOW TO IDENTIFY YOUR TURBOCHARGER: If you are not sure fitment for your old turbo, please let us know this information: 1. The OEM code information from your original turbo nameplate 2. The Engine code & KW, HP, Year for your car 3. The Photos ofyour complete turbo 4. Please note that the registration number cannot identify your turbocharger Specification Turbo Model: RHF5 Engine: J97A, 115 J97A, WLTCompressor Wheel Diameter: 36.3/52.4mm Compressor Trim：48.0 Turbine Wheel Diameter: 40/42.7mm  Turbine Trim：87.8 Cooling Type: Water & Oil Cooled Condition: New & Factory Balanced Bearing Type: Journal Bearing Thrust Bearing: 360 degrees Horsepower:   Up to 109HPWarranty: one year warranty for any manufacturing defect Accessories: You will get exactly as shown in the picture above Feature 1. Turbine housing： Ductile iron QT450-10 shell with high-temperature resistance up to 700 degrees Celsius 2. Steel Turbine Wheel： Made from the special K418 alloy to achieve high oxidation resistance & stability under high temperatures up to 900 degrees Celsius 3. Compressor housing：ZL104 aluminum with lightweight 4. Compressor wheel/blades： Cast aluminium with good gas tightness & corrosion resistance 5. All necessary gaskets included for ease of installation 6.100% balancing Test by TURBOTECHNICSVSR3 This Turbocharger you will receive has been balanced using the VSR machine technology. 7. G3-min-Flow VNT Turbo testing The G3-min-Flow (Air) was designed & built in the UK by 3 former Garrett Test Engineers whom have a combined total of 60 years in the Industry.the machine can accurately measure the flow through the VGT turbo & verify that it is set to the OEM factory setting. easily adjust the critical minimum-flow stop to the correct setting before the turbocharger leaves workshop 8. Advanced Actuator Tester/ Programmer：electronic actuator diagnostic with G3-rea-master can rewrite memory in electronic actuators & also allows to modify operation range of the actuator arm, that

Includes:: changing open & close positions of the working angle Note* Please confirm your original turbo OEM/PART NUMBER before Purchasing.* Professional installation is highly recommended.* For any needs please contact us.* Before installing the new turbocharger, the cause that led to the failure of the turbo must be analyzed & eliminated (e.g. insufficient oil supply, foreign bodies in the intake area, crankcase ventilation without function, etc.)!

...

Application Compatible for Mazda MX5 MX-5 NA MIATA MX5 1.6L1.8L mk 11990-1997 Compatible for Mazda RX-7 NA mk 2 1986-1991 Features Condition: New Material： Aluminum
Colour: as the picture shows Package
Includes:: 1pc short shifter kit High quality material & easy to install Durable roller bearings This shifter will reduce the bouncing rate by more than 40% & allow you to restart gear shifting. Notice- No instruction included; Professional installation alignment suggested.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help. Warranty: one year warranty for any manufacturing defect

...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket adjustable coilovers suspension kit compatible for Mazda Miata series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Mazda Miata MK1 NA 1.6L 1.8L 1990
- 1997 Specification Quantity: 2 front+2 rear shocks 2 C- Spanners for adjustment Bump stops & dust covers Spring rate Front: 8 kg/mm (448 lbs/in) Spring rate Rear: 8 kg/mm (448 lbs/in) Adjustable

Height: Yes
Colour: Golden Warranty: one year warranty for any manufacturing defect Features- Adjustable ride height- Adjustable pre-load spring tension- Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down.- Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.
- All inserts come with fitted rubber boots to protect the damper & keep clean.- Improve your handling performance without sacrifice comfortable ride.- A fast & affordable way to easily upgrade your car's appearance.- Easy installation with right tools.- Ideal for any track, drift & fast road & can also be used for daily driving. Notice- No instruction included; Professional installation & alignment suggested.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.






...

Application Compatible for Mazda RX7 FC FC3S 1986-1991 Specification Quantity: 2 pieces front + 2 pieces rear as shown Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 8 kg/mm (448 lbs/in)​ Adjustable Damper: Non adjustable Damper Adjustable

Height: Yes Adjustable camber plate: Yes
Colour: Red Warranty: one year warranty for any manufacturing defect Feature* Adjustable ride height * Adjustable pre-load spring tension * Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response * Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down. * Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance. * All inserts come with fitted rubber boots to protect the damper & keep clean. * Improve your handling performance without sacrifice comfortable ride. * A fast & affordable way to easily upgrade your car's appearance. * Easy installation with right tools. * Ideal for any track, drift & fast road & can also be used for daily driving. Note* No instruction included; Professional installation & alignment suggested. * Please check our store for other auto parts you may be interested in. * Please feel free to contact us for whatever we can help.



...

Introduction MXR-B2 series (also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application Compatible for Mazda RX-7/ Compatible for Mazda Savanna RX-7 second generation FC3S 1985–1992 2 door coupe/2 door convertible Specification Top mount: Front camber plate；rear pillow ball Damping:not available Spring rate Front:10 kg/mm (560 lbs/in) Spring rate Rear: 8 kg/mm (448 lbs/in)​ Adjustable

Height: lowering 1-3 inch Shock type: Twin tube Spring Preload: 7-10 mm
Colour: gold body with black spring Package included Complete coilover assembly kit for front & rear A pair wrench for height adjustment Dimension Package dimension: 63*51*21 Weight: 25560g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2. Camber plate top mounts help to eliminate the need for a separate camber kit. 3. Twin-Tube structure allows sufficient stroke within the shock absorber. 4. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. 5. Separate height adjustment does not affect damper stroke & height can be adjusted with coilovers installed on the vehicle. 6. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 7. Most pieces in our coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 8. Steel shock bodies with special surface treatment to improve the durability. 9. Full rebuildable Warranty: one year warranty for any manufacturing defect




...

Application Compatible for Mercedes Benz S-Class W221 Compatible for Mercedes S350 Bluetec 4 Matic Sedan 4-Door 3.0L 2012-2013 Compatible for Mercedes S450 4 Matic Sedan 4-Door 4.6L 2008-2011 Compatible for Mercedes S550 4 Matic Sedan 4-Door 4.6L 2012-2013 Compatible for Mercedes S550 4 Matic Sedan 4-Door 5.5L 2007-2011 Compatible for Mercedes Benz CL-Class C216 Compatible for Mercedes CL550 4 Matic Coupe 2-Door 4.6L 2011-2013 Compatible for Mercedes CL550 4 Matic Coupe 2-Door 5.5L 2009-2010 Compatible for S-Class Vehicles With 4MATIC (AWD) Suspension Only.NOT fit on Vehicles Equipped with Base RWD or ABC Suspension Models OE/OEM Number 2213200438, 221 320 04 38, A2213200438, A221 320 04 38, 2213205313, 221 320 53 13, A2213205313, A221 320 53 13, 2213201738, 221 320 17 38, A2213201738, A221 320 17 38, 221320173880, 221 320 17 38 80, A221320173880, A221 320 17 38 80, 221320173860, 221 320 17 38 60, A221320173860, A221 320 17 38 60, 221320173888, 221 320 17 38 88, A221320173888, A221 320 17 38 88, 221320043880, 221 320 04 38 80, A221320043880, A221 320 04 38 80, 221320043860, 221 320 04 38 60, A221320043860, A221 320 04 38 60, 221320043888, 221 320 04 38 88, A221320043888, A221 320 04 38 88, 221320531360, 221 320 53 13 60, A221320531360, A221 320 53 13 60, 221320531380, 221 320 53 13 80, A221320531380, A221 320 53 13 80, 221320531388, 221 320 53 13 88, A221320531388, A221 320 53 13 88 Specifications Condition: New Fitment Type: Direct Replacement Quantity: 1 piece  (for Front Left) Placement on Vehicle:for front left Driver's side Greasable or Sealed: sealed Adjustable: yes Length, width & height (in/cm):33*8*7.9 /84*20.5*20 Weight: 9.1KGStroke:70mm Operating Pressure: ≤2.0 Mpa Temperature range：+70°、-40° Feature 1. 100% Air Tightiness testing 2. 24 hours air tightness test ≤0.02 M Pa 3. Anti-corrosion & provide a more consistent wear surface 4. Built to strict quality control standards 5. CNC Machined Components 6. Designed for Comfort Suspension 7. Direct replacement for OEM strut without modification 8. Easy to install 9. Eliminating abnormal sound 10. Gives the driver more control of ride 11. Good heat dissipation 12. It has a high compressive strength & good sound insulation to ensure our driving comfort & safety 13. Restore the original ride height & improve ride quality 14. Test more than 3 million times 15. Sturdy & Durable Material Notice 1. These air suspensions are aftermarket ones. They will replace the original air shock absorber. Please double confirm the compatibility as well as the OEM number before purchasing.2. The best way to check compatibility is to check the Part Number on your old unit.3. Professional installation is recommended.4. If there is any question, please contact us. Warranty: one year warranty for any manufacturing defect ...