Application Compatible for Mazda 5 Front Passenger's side ONLY 2012-2017 Compatible for Mazda 6 Front Passenger's/ Rear Driver's side ONLY 2006-2007 Compatible for Mazda CX-7 Front Passenger's side ONLY 2007-2012 Compatible for Mazda CX-9 Front Passenger's side ONLY 2007-2015 Compatible for Mazda RX-8 Front Driver's side ONLY 2009-2011 Specification OEM Number or Interchangeable Part Number: G22C5858XF, 742-802, 748-090, 748-094, D01G5858XB, GJ6A5858XC, 617-51176 742802, 748090, 748094, 742 802, 748 090, 748 094 Description:
- 1 PC the same as the picture shows (Right/ Passenger side)
- Power Motor ONLY
- NOT Included: Window Regulator
- With 6 pin connector
- Hardwired or Plug-in: Plug-in Note* Professional installation is highly recommended (No Instruction Included) * For any needs please contact us Warranty: one year warranty for any manufacturing defect




...

Introduction MXR-B3 series (also called MXR-SLC) based on MXR-B2 series (also called MXR-SNA) coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for Mazda 6 2003-2006 GG 4-door sedan Compatible for Mazda 6 2003-2006 GG 5-door liftback Compatible for Mazda 6 2003-2006 GG 5-door wagon Compatible for Mazdaspeed 6/ Mazda 6 MPS2005-20074-door sedan Specification Top mount: Front pillow ball Damping: 24 ways rebound damping Spring rate Front: 9 kg/mm (504 in/lbs) Spring rate Rear: 9 kg/mm (504 in/lbs) Adjustable

Height: lowering 1-3 inch Shock type: Twin tube Spring Preload: 7-10 mm
Colour:red body with black spring Package includedfront complete coilover assembly rear springs & spring adjusters & shocks A pair wrench for height adjustment Dimension Package dimension: 63*51*21 Weight: 25080g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2.A 24 rebound damping adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. 3. Twin-Tube structure allows sufficient stroke within the shock absorber. 4. Separate height adjustment does not affect damper stroke & height can be adjusted with coilovers installed on the vehicle. 5. Dust boot included to protect damper seal 6. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 7. Most pieces in our coilover systems, including collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 8. Steel shock bodies with special surface treatment to improve the durability. 9. Full rebuildable Warranty: one year warranty for any manufacturing defect




...

Introduction MXR-B2 series (also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Applicationcompatible for Mazda 6 2003-2006 GG 4-door sedan compatible for Mazda 6 2003-2006 GG 5-door liftback compatible for Mazda 6 2003-2006 GG 5-door wagon compatible for Mazdaspeed 6/ Mazda 6 MPS2005-20074-door sedan Specification Top mount: Front pillow ball Damping: not available Spring rate Front: 9 kg/mm (504 in/lbs) Spring rate Rear: 9 kg/mm (504 in/lbs) Adjustable

Height: lowering 1-3 inch Shock type: Twin tube Spring Preload: 7-10 mm
Colour: gold body with black spring Package includedfront complete coilover assembly rear springs & spring adjusters & shocks A pair wrench for height adjustment Dimension Package dimension: 63*51*21 Weight: 25160g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2. Pillow ball top mounts improve the steering feel & response. 3. Twin-Tube structure allows sufficient stroke within the shock absorber. 4. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 5, Separate height adjustment does not affect damper stroke & height can be adjusted with coilovers installed on the vehicle. 6, Steel shock bodies with special surface treatment to improve the durability. 7, Full rebuildable Warranty: one year warranty for any manufacturing defect




...

Application Compatible for Ford RANGER 3.0 TDDI TDCI2006
- 105/143 WLAA compatible for Mazda BT-50 2.5 MRZ-CD 2006
- 105/143

...

Application Compatible for Mazda CX-72.3L2.3L Turbocharged Model 2007
- 2010 Turbo Model: K0422-582OEM/ Part No.53047109904, 53047109907,
...

Introduction Looking to boost your car's horsepower? Is your car's original turbocharger not performing well or need replacing? Maxpeedingrods stocks all the best OEM-quality turbochargers & turbo parts to give your car the power, performance, & reliability you deserve. Maxpeedingrods aftermarket replacement turbos provide the perfect solution by delivering a high-quality turbo at a budget-friendly price. Application Compatible for Ford Ranger 2.5L D HS 1999-2006 Compatible for Ford Ranger Double Cab 2.5L D WLT 2004-Compatible for Ford Ranger Double Cab 2.5L D J97A 1999-2003 Compatible for Mazda B25002.5L 115 J97A 1996-Compatible for Ford Courier WL-T 2.5L Diesel Compatible for Mazda Bravo WL-T 2.5L Diesel Turbo Part Number & OEM Number WL84, WL85, XN349G348AB, WL84.13.700, WL8413700，VJ26, VJ33, VA430013, VB430013, VC430013, VD430013, VE430013, VF430013, VA430089, VB430089, VC430089, VD430089, VI430089, VA430090, VB430090, VC430090, VD430090, VE430090, VF430090*HOW TO IDENTIFY YOUR TURBOCHARGER: If you are not sure fitment for your old turbo, please let us know this information: 1. The OEM code information from your original turbo nameplate 2. The Engine code & KW, HP, Year for your car 3. The Photos ofyour complete turbo 4. Please note that the registration number cannot identify your turbocharger Specification Turbo Model: RHF5 Engine: J97A, 115 J97A, WLTCompressor Wheel Diameter: 36.3/52.4mm Compressor Trim：48.0 Turbine Wheel Diameter: 40/42.7mm  Turbine Trim：87.8 Cooling Type: Water & Oil Cooled Condition: New & Factory Balanced Bearing Type: Journal Bearing Thrust Bearing: 360 degrees Horsepower:   Up to 109HPWarranty: one year warranty for any manufacturing defect Accessories: You will get exactly as shown in the picture above Feature 1. Turbine housing： Ductile iron QT450-10 shell with high-temperature resistance up to 700 degrees Celsius 2. Steel Turbine Wheel： Made from the special K418 alloy to achieve high oxidation resistance & stability under high temperatures up to 900 degrees Celsius 3. Compressor housing：ZL104 aluminum with lightweight 4. Compressor wheel/blades： Cast aluminium with good gas tightness & corrosion resistance 5. All necessary gaskets included for ease of installation 6.100% balancing Test by TURBOTECHNICSVSR3 This Turbocharger you will receive has been balanced using the VSR machine technology. 7. G3-min-Flow VNT Turbo testing The G3-min-Flow (Air) was designed & built in the UK by 3 former Garrett Test Engineers whom have a combined total of 60 years in the Industry.the machine can accurately measure the flow through the VGT turbo & verify that it is set to the OEM factory setting. easily adjust the critical minimum-flow stop to the correct setting before the turbocharger leaves workshop 8. Advanced Actuator Tester/ Programmer：electronic actuator diagnostic with G3-rea-master can rewrite memory in electronic actuators & also allows to modify operation range of the actuator arm, that

Includes:: changing open & close positions of the working angle Note* Please confirm your original turbo OEM/PART NUMBER before Purchasing.* Professional installation is highly recommended.* For any needs please contact us.* Before installing the new turbocharger, the cause that led to the failure of the turbo must be analyzed & eliminated (e.g. insufficient oil supply, foreign bodies in the intake area, crankcase ventilation without function, etc.)!

...

Introduction MXR-B3 series (also called MXR-SLC) based on MXR-B2 series (also called MXR-SNA) coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for MAZDA MX-5 II (NB) (01/1998-10/2005) Compatible for Mazda Miata MX-5 NA (1.6L, 1.8L) 1989-1997 Compatible for Mazda Miata MX-5 NB (1.6L, 1.8L) 1998- 2005 Compatible for Mazda Miata Base Convertible 2D 1990-1997 Compatible for Mazda Miata Base Convertible 2D 1999-2005 Compatible for Mazda Miata SE Convertible 2D 2000-2003 Compatible for Mazda Miata LE Convertible 2D 1993 Compatible for Mazda Miata M Edition Convertible 2D 1994-1997 Compatible for Mazda Miata STO Convertible 2D 1997 Compatible for Mazda Miata 10th Anniversary Convertible 2D 1999 Compatible for Mazda Miata LS Convertible 2D 2000-2005 Specification Damping Levels: 24 levels Adjustable

Height: Yes, lowering 1" to 3" Adjustable camber plate: No Top mount (Front & Rear): Pillow ball Spring rate Front: 7 kg/mm (392 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in) Twin Tube Internal Construction
Colour: Golden Package included 2 pieces front+2 pieces rear as shown Dimension
Size: 63*51*21 cm Weight: 21.38kg Feature Twin-Tube structure allows sufficient stroke within the shock absorber. Pillow ball top mount
- It improves the steering feel & response. A 24 rebound damping adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. Separate height adjustment does not affect damper stroke. Height can be adjusted with coilovers installed on the vehicle. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. Height Adjustment tools included. Full rebuildable. Warranty: one year warranty for any manufacturing defect





...

Application Compatible for Mazda MX5 MX-5 NA MIATA MX5 1.6L1.8L mk 11990-1997 Compatible for Mazda RX-7 NA mk 2 1986-1991 Features Condition: New Material： Aluminum
Colour: as the picture shows Package
Includes:: 1pc short shifter kit High quality material & easy to install Durable roller bearings This shifter will reduce the bouncing rate by more than 40% & allow you to restart gear shifting. Notice- No instruction included; Professional installation alignment suggested.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help. Warranty: one year warranty for any manufacturing defect

...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket adjustable coilovers suspension kit compatible for Mazda Miata series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Mazda Miata MK1 NA 1.6L 1.8L 1990
- 1997 Specification Quantity: 2 front+2 rear shocks 2 C- Spanners for adjustment Bump stops & dust covers Spring rate Front: 8 kg/mm (448 lbs/in) Spring rate Rear: 8 kg/mm (448 lbs/in) Adjustable

Height: Yes
Colour: Golden Warranty: one year warranty for any manufacturing defect Features- Adjustable ride height- Adjustable pre-load spring tension- Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down.- Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.
- All inserts come with fitted rubber boots to protect the damper & keep clean.- Improve your handling performance without sacrifice comfortable ride.- A fast & affordable way to easily upgrade your car's appearance.- Easy installation with right tools.- Ideal for any track, drift & fast road & can also be used for daily driving. Notice- No instruction included; Professional installation & alignment suggested.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.






...

Application Compatible for Mazda RX7 FC FC3S 1986-1991 Specification Quantity: 2 pieces front + 2 pieces rear as shown Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 8 kg/mm (448 lbs/in)​ Adjustable Damper: Non adjustable Damper Adjustable

Height: Yes Adjustable camber plate: Yes
Colour: Red Warranty: one year warranty for any manufacturing defect Feature* Adjustable ride height * Adjustable pre-load spring tension * Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response * Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down. * Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance. * All inserts come with fitted rubber boots to protect the damper & keep clean. * Improve your handling performance without sacrifice comfortable ride. * A fast & affordable way to easily upgrade your car's appearance. * Easy installation with right tools. * Ideal for any track, drift & fast road & can also be used for daily driving. Note* No instruction included; Professional installation & alignment suggested. * Please check our store for other auto parts you may be interested in. * Please feel free to contact us for whatever we can help.



...