Specification Isochronous Operation/ Steady State Stability:± 0.25% or better Speed Range/ Governor:1K-7.5K Hz continuous Speed Drift with Temperature:± 1% Maximun IDLE Adjustment:160 ± 20 Hz ~ 60% of set speed Droop adjustment Min. (K-L Jumpered):15 Hz. ± 6 Hz. per 1.0 A change Droop adjustment Max. (K-L Jumpered):400 Hz. ± 75 Hz. per 1.0 A change Droop Adj. Max. (K-L Jumpered):875 Hz., ± 75 Hz. per 1.0 A change Droop Adj. Min. (K-L Jumpered):15 Hz., ± 6 Hz. per 1.0 A change Speed Trim Range:± 200 Hz. Remote Variable Speed Range:500 -7.5 Hz. or any part thereof Terminal Sensitivity: J: 100 Hz., ± 15 Hz/ Volt at 5.0 K Impedance L: 735 Hz., ± 60 Hz/ Volt at 65 K Impedance N: 148 Hz., ± 10 Hz/ Volt at 1 Meg. Impedance P: 10V DC Supply at 20ma Max. Speed Switch Adjustment Range: 1000-10000 Hz. Ambient Operating Temperature Range: -40°c to +85°c Relative Humidity: up to 95% Storage Temperature: -55°c ~ 90°c Shock: 20-100HZ 500mm/ Sec. Input Power Supply: 12 or 24V DC Battery Systems (Transient & Reverse Voltage Protected) Polarity: Negative Ground (Compatible for Case Isolated) Power Consumption: 50m A continuous plus actuator current Actuator Current Range at 25°c- (Inductive Load): Min. 2.5 Amps, Max. 10 Amps continuous Speed Sensor Signal: 0.5-120 V RMS Speed Switch Relay Contacts (N.O.and N.C.): 10 Amp Note Please double cofirm before placing order.