Application Compatible for Mercedes-Benz 1998-2005 W163 ML-Class All Models (

Includes:: ML320 / ML350 / ML430

...

Introduction The engine conversion bracket can be used to update the engine device of the vehicle, replace the old clamshell mount with the new ls engine。 Application Fit for 1973-1998 compatible for chevy trucks & other cars that use the clam shell. Work with all LS serise engines (4.8L, 5.3L, 5.7L, 6.0L, 6.2L) Package included 1 × left bracket 1× right bracket 8 × M10 bolts Feature Condition:100% Brand New
Colour: Black
Material: These swap adapter plates are made from heavy-duty steel. Surface treatment: The surface of the product is sprayed, which makes the product durable, not easy to rust & corrosion, long service life, & supports long-term work. Easy installation: Easy to install. No Cutting, drilling or welding need. Bolts
Size:8 × M10*1.5*40


...

Applicationfor LS LSX Engine 4.8 5.3 5.7 6.0 6.2 Specifications Quanity: 1 left bracket + 1 right bracket + 8 M10 bolts Warranty: one year warranty for any manufacturing defect Condition: New Notice Used for older compatible for vehicles with clamshell mounts to a new LS engine. Eliminates the need for adaptor brackets, lowers the center of gravity, & achieves 3 degrees of motor angle. 73-98 compatible for chevy trucks & other cars that use the clam shell ...

Application Fits practically all Class 7 & 8 trucks: for Spicer: 1610, 1710, 1760, 1810, 1880 Spicer SPL 140, 170 for Rockwell: 16N, 17N, 18N, & 1710 Series universal joints for Meritor: RPL 20 & 25 Permalube Series Feature-Removes rusted & corroded bearings easily without damage to the U-Joint components -Applies up to 7 tons of force to separate the yoke assembly & remove bearings correctly. -Disassemble & reassemble u-joint cups without heat or hammering -Condition: New Warranty: one year warranty for any manufacturing defect ...

Specification This solenoid is found on 1984-Up 12 volt Club Car compatible for DS & 2004-UP Precedent gas compatible for golf carts. Club Car OEM part number: 1013609, 435-154 Copper Contacts 4 Terminal Design Warranty: one year warranty for any manufacturing defect Condition: New Accessories: You will get exactly as shown in the picture above Notice Use caution when installing. Do not over tighten the nuts/terminal posts Please fell free to contact us with any question ...

Application for For Club Car compatible for Golf Carts 1984-2004OEM Number or Interchangeable Part Number 103601501, 101878302, 101830901, 1012452, 1018783-02NOTE* Please confirm your original part number or oem numbr can matche up with one of the part numbers above * Professional installation is highly recommended (No Instruction Included) * For whatever we can help, please feel free to contact us. We are always here for you Warranty: one year warranty for any manufacturing defect ...

Application Compatible for BMW 3 Series (E36) 1991–1998 Europe Compatible for BMW 3 Series (E36) 1992—1999 US & Canada Specification Quantity: One set with 2 pieces Adjustable Timing Mark: YESBushing: Pillow Ball deisgn for adjustment precisely
Colour: Green Warranty :one year warranty Feature
- All components are carefully selected with the qualitymaterial for durable use
- Super strong & significant improvement for driftingcars- Adjust camber independent of caster- Large range of adjustment while still allowing caster andcamber to be adjusted from the top without cutting thestrut tower
- Maintain proper strut angle at any position by not pre-setting theangle
- Provide proper orientation with a replaceable urethanebushing- Minimize noise associated with the urethane bushing Notice- With pillow ball bushing, these camber plates will NOT fit OEM stock springs. They will fit coilover springonly.
- The picture with

Dimensions is available. Please contactus for it.
- Please feel free to contact us for whatever we can help foryou.
- No instruction included; professional installation & alignment suggested.









...

Application Compatible for E36 models 3-series 92-98: 318i, 318is, 318ic, 320i, 323i, 323ic, 323is, 325i, 325is, 325ic, 328i, 328is, 328ic, M3 (will not fit 318ti) Compatible for E46 models 3-series 99-05:320i, 323i, 323ci, 323cic, 325i, 325ci, 325cic, 325xi, 328i, 328ci, 328cic, 330i, 330ci, 330cic, M3 Compatible for E83 Models X3:2.5i, 2.5si, 3.0i, 3.0si through 2010 for E85 E86 Models Z4: 2.5i, 2.5si, 3.0i, 3.0si, M-Roadster (will not fit M-Coupe) Compatible for E89 Models Z4: 30i, 35i, 35is 09-current Specification 1.
Material: Steel, rubber 2. Installation location: Rear, Lower, Left, Right 3. Surface finish: Powder-Coated 4. Eye-to-eye Length range :525-570mm/20.67''-22.44'' 5. Camber Adjustment: -1.0 To +3.0 Degrees 6. Weight：3.85kg 7. Package Dimensions：62*13*8cm 8. Bushing Inner diameter、width：φ12、55.5mm Outer diameter、width：φ32、32mm 9. Nuts：M18*1.5 Package included 1 x Pair of Rear Lower Adjustable Camber Arm Kit (Left Right) Feature 1.100% Brand New Items, Never Used Or Installe...
...

Specification Isochronous Operation/ Steady State Stability:± 0.25% or better Speed Range/ Governor:1K-7.5K Hz continuous Speed Drift with Temperature:± 1% Maximun IDLE Adjustment:160 ± 20 Hz ~ 60% of set speed Droop adjustment Min. (K-L Jumpered):15 Hz. ± 6 Hz. per 1.0 A change Droop adjustment Max. (K-L Jumpered):400 Hz. ± 75 Hz. per 1.0 A change Droop Adj. Max. (K-L Jumpered):875 Hz., ± 75 Hz. per 1.0 A change Droop Adj. Min. (K-L Jumpered):15 Hz., ± 6 Hz. per 1.0 A change Speed Trim Range:± 200 Hz. Remote Variable Speed Range:500 -7.5 Hz. or any part thereof Terminal Sensitivity: J: 100 Hz., ± 15 Hz/ Volt at 5.0 K Impedance L: 735 Hz., ± 60 Hz/ Volt at 65 K Impedance N: 148 Hz., ± 10 Hz/ Volt at 1 Meg. Impedance P: 10V DC Supply at 20ma Max. Speed Switch Adjustment Range: 1000-10000 Hz. Ambient Operating Temperature Range: -40°c to +85°c Relative Humidity: up to 95% Storage Temperature: -55°c ~ 90°c Shock: 20-100HZ 500mm/ Sec. Input Power Supply: 12 or 24V DC Battery Systems (Transient & Reverse Voltage Protected) Polarity: Negative Ground (Compatible for Case Isolated) Power Consumption: 50m A continuous plus actuator current Actuator Current Range at 25°c- (Inductive Load): Min. 2.5 Amps, Max. 10 Amps continuous Speed Sensor Signal: 0.5-120 V RMS Speed Switch Relay Contacts (N.O.and N.C.): 10 Amp Note Please double cofirm before placing order. ...

Application Compatible for BMW N55 F20 F30 F31 M135i M235i 2012-2016 F30/F31/F36 compatible for BMW 335i 2012-2016 F32 compatible for BMW 435 2014-2016 F22/F23 compatible for BMW M235 2014-2016 F20 compatible for BMW M135 2016+ F87 compatible for BMW M2 Feature Package:1x Charge Pipe Kit Function: -Increase throttle response & decreases turbo lag. -Throttle body matched 3" piping. -Retains factory style o-ring throttle body lock flange. Precision CNC machined throttle body flange ensures leak free connection to throttle body. Quick & easy connection & disconnection to throttle body. Ideal connection compared to the silicone hose & hose clamp connection found in all other aftermarket diverter valve upgrade pipes available in the marketplace. -Precision CNC machined MAP sensor flange ensures leak free connection. -Diverter Valve Charge Pipe features beaded ends & T-bolt clamps to prevent intercooler piping from coming off from boost. -Optional Type III Hard Black Anodizing (for stealth & OEM look). Hard anodizing helps improve durability of intercooler piping. Resists bent or dented piping. -Compatible with the factory electronic diverter valve. -
Includes: all hardware for complete installation.
...