Applicationfor LS LSX Engine 4.8 5.3 5.7 6.0 6.2 Specifications Quanity: 1 left bracket + 1 right bracket + 8 M10 bolts Warranty: one year warranty for any manufacturing defect Condition: New Notice Used for older compatible for vehicles with clamshell mounts to a new LS engine. Eliminates the need for adaptor brackets, lowers the center of gravity, & achieves 3 degrees of motor angle. 73-98 compatible for chevy trucks & other cars that use the clam shell ...

Application Fits practically all Class 7 & 8 trucks: for Spicer: 1610, 1710, 1760, 1810, 1880 Spicer SPL 140, 170 for Rockwell: 16N, 17N, 18N, & 1710 Series universal joints for Meritor: RPL 20 & 25 Permalube Series Feature-Removes rusted & corroded bearings easily without damage to the U-Joint components -Applies up to 7 tons of force to separate the yoke assembly & remove bearings correctly. -Disassemble & reassemble u-joint cups without heat or hammering -Condition: New Warranty: one year warranty for any manufacturing defect ...

Specification This solenoid is found on 1984-Up 12 volt Club Car compatible for DS & 2004-UP Precedent gas compatible for golf carts. Club Car OEM part number: 1013609, 435-154 Copper Contacts 4 Terminal Design Warranty: one year warranty for any manufacturing defect Condition: New Accessories: You will get exactly as shown in the picture above Notice Use caution when installing. Do not over tighten the nuts/terminal posts Please fell free to contact us with any question ...

Application For Club Car compatible for DS Gas or Electricmodels from 1993'-Up

Specification- Condition: New. - Warranty:

...

Application for For Club Car compatible for Golf Carts 1984-2004OEM Number or Interchangeable Part Number 103601501, 101878302, 101830901, 1012452, 1018783-02NOTE* Please confirm your original part number or oem numbr can matche up with one of the part numbers above * Professional installation is highly recommended (No Instruction Included) * For whatever we can help, please feel free to contact us. We are always here for you Warranty: one year warranty for any manufacturing defect ...

Application Compatible for E36 models 3-series 92-98: 318i, 318is, 318ic, 320i, 323i, 323ic, 323is, 325i, 325is, 325ic, 328i, 328is, 328ic, M3 (will not fit 318ti) Compatible for E46 models 3-series 99-05:320i, 323i, 323ci, 323cic, 325i, 325ci, 325cic, 325xi, 328i, 328ci, 328cic, 330i, 330ci, 330cic, M3 Compatible for E83 Models X3:2.5i, 2.5si, 3.0i, 3.0si through 2010 for E85 E86 Models Z4: 2.5i, 2.5si, 3.0i, 3.0si, M-Roadster (will not fit M-Coupe) Compatible for E89 Models Z4: 30i, 35i, 35is 09-current Specification 1.
Material: Steel, rubber 2. Installation location: Rear, Lower, Left, Right 3. Surface finish: Powder-Coated 4. Eye-to-eye Length range :525-570mm/20.67''-22.44'' 5. Camber Adjustment: -1.0 To +3.0 Degrees 6. Weight：3.85kg 7. Package Dimensions：62*13*8cm 8. Bushing Inner diameter、width：φ12、55.5mm Outer diameter、width：φ32、32mm 9. Nuts：M18*1.5 Package included 1 x Pair of Rear Lower Adjustable Camber Arm Kit (Left Right) Feature 1.100% Brand New Items, Never Used Or Installe...
...

Specification Isochronous Operation/ Steady State Stability:± 0.25% or better Speed Range/ Governor:1K-7.5K Hz continuous Speed Drift with Temperature:± 1% Maximun IDLE Adjustment:160 ± 20 Hz ~ 60% of set speed Droop adjustment Min. (K-L Jumpered):15 Hz. ± 6 Hz. per 1.0 A change Droop adjustment Max. (K-L Jumpered):400 Hz. ± 75 Hz. per 1.0 A change Droop Adj. Max. (K-L Jumpered):875 Hz., ± 75 Hz. per 1.0 A change Droop Adj. Min. (K-L Jumpered):15 Hz., ± 6 Hz. per 1.0 A change Speed Trim Range:± 200 Hz. Remote Variable Speed Range:500 -7.5 Hz. or any part thereof Terminal Sensitivity: J: 100 Hz., ± 15 Hz/ Volt at 5.0 K Impedance L: 735 Hz., ± 60 Hz/ Volt at 65 K Impedance N: 148 Hz., ± 10 Hz/ Volt at 1 Meg. Impedance P: 10V DC Supply at 20ma Max. Speed Switch Adjustment Range: 1000-10000 Hz. Ambient Operating Temperature Range: -40°c to +85°c Relative Humidity: up to 95% Storage Temperature: -55°c ~ 90°c Shock: 20-100HZ 500mm/ Sec. Input Power Supply: 12 or 24V DC Battery Systems (Transient & Reverse Voltage Protected) Polarity: Negative Ground (Compatible for Case Isolated) Power Consumption: 50m A continuous plus actuator current Actuator Current Range at 25°c- (Inductive Load): Min. 2.5 Amps, Max. 10 Amps continuous Speed Sensor Signal: 0.5-120 V RMS Speed Switch Relay Contacts (N.O.and N.C.): 10 Amp Note Please double cofirm before placing order. ...

Application Compatible for BMW N55 F20 F30 F31 M135i M235i 2012-2016 F30/F31/F36 compatible for BMW 335i 2012-2016 F32 compatible for BMW 435 2014-2016 F22/F23 compatible for BMW M235 2014-2016 F20 compatible for BMW M135 2016+ F87 compatible for BMW M2 Feature Package:1x Charge Pipe Kit Function: -Increase throttle response & decreases turbo lag. -Throttle body matched 3" piping. -Retains factory style o-ring throttle body lock flange. Precision CNC machined throttle body flange ensures leak free connection to throttle body. Quick & easy connection & disconnection to throttle body. Ideal connection compared to the silicone hose & hose clamp connection found in all other aftermarket diverter valve upgrade pipes available in the marketplace. -Precision CNC machined MAP sensor flange ensures leak free connection. -Diverter Valve Charge Pipe features beaded ends & T-bolt clamps to prevent intercooler piping from coming off from boost. -Optional Type III Hard Black Anodizing (for stealth & OEM look). Hard anodizing helps improve durability of intercooler piping. Resists bent or dented piping. -Compatible with the factory electronic diverter valve. -
Includes: all hardware for complete installation.
...

Application Compatible For Peterbilt 379 trucks OE/ Part number Compatible for Firestone W02-358-7036, W023587036, W02-3587036 Compatible for Contitech SC29-Y036, SC29Y036 Compatible for Goodyear 1S5-186 Compatible for Peterbilt 29-03200, 2903200, 2902454 Specification Condition: Brand New Fitment Type: Direct Replacement Quantity: 2x Cab Air Springs Placement on Vehicle: Truck cabin sleeper Greasable or Sealed: Sealed Length, width & height (cm/in): 27*19*10 / 10.6*7.5*3.9 Weight:1.9 kg/4.23 lbs Extended

Height: 330mm Compressed

Height: 130mm Work Stroke: 200mm Operating Pressure: ≤2.0 Mpa Temperature range：≤+70°, ≥-40° Warranty: one year warranty for any manufacturing defect Feature 1. ISO / IATF 16949 certified 2. 100% Air Tightiness testing 3. 24 hours air tightness test ≤0.02 M Pa 4. Anti-corrosion & provide a more consistent wear surface 5. Built to strict quality control standards 6. CNC Machined Components 7. Designed for Comfort Suspension 8. Direct replacement for OEM strut without modification 9. Easy...



...

Introduction The clutch kit will include all the components necessary, such as the clutch (hub, cover plate, belt, & rivets), flywheel, friction surfaces & pressure plate. The benefits of a clutch kit in a stock ATV include faster acceleration, reduced belt heat, longer belt life & enhanced backshifting. Maxpeedingrods drive clutches are designed to last Approx. 60, 000 miles before they need to be replaced. Maxpeedingrods provides OEM & aftermarket clutch kits for Go Kart compatible for Mini Bike & other small off-road vehicles. Our clutch kits will meet all your needs of a driven clutch. Application Great replacement clutch for Go Kart compatible for Mini Bike & other small off-road vehicles. Specifications Replaces Part Number: Manco 8190 & Compatible for Comet 219554A Package Included: 1x 30 Series Torque Converter Driver Clutch Condition: New Warranty: one year warranty for any manufacturing defect Features- 1'' straight shaft bore with 1/4'' key way. - 8HP Max - A high quality & professional clutch. - High impact, wear resistant that is super durable. - Replace the old broken clutch. - User-friendly controls for easy starting & operation. Notice- No instruction included; Professional installation is highly recommended. - Please check our store for other auto parts you may be interested in. - Please feel free to contact us for whatever we can help. ...