Applicationfor S14 Silvia 1994-1998 (Japan Market) for S14 200SX BASE MODEL/ LE 1994-1998 (Europe / Australia/ New Zealand Market) for S14 240SX BASE MODEL/ LE/SE 1995-1998 (USA Market) Note: Don't compatible for Nissan 200SX SE /SE-R Specification Top mounts: pillow ball top mount with camber plate front, standard rubber top mount rear Damping: 24 levels rebound damping adjustable Spring rate Front: 8 kg/mm (448 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in) Spring length Front: 180mm Spring length Rear: 255mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 420mm-470mm Coilover overall length Rear: 550mm-700mm Shock type: Twin tube. Spring Preload: 7-10 mm.
Colour: gold. Package includedproduct included: complete coilovers 2 front & 2 rear, a pair wrench for height adjustment. Dimension Gross weight: 26.06kg Package

Size: 71*51*21cm Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2. Camber pla...





...

Introduction A turbocharger (also called turbo), is a turbine-driven forced induction device that increases an internal combustion engine’s efficiency & power output by forcing extra air into the combustion chamber. The key difference between a turbocharger & a conventional supercharger is precisely that a turbocharger is powered by a turbine driven by the engine's exhaust gas. A turbo consists of a compressor, a cartridge, a turbine & an exhaust valve. Maxpeedingrods provides universal turbochargers to enhance overall engine performance of your beloved car. Application Compatible for 1.5L to 2.5L any 4/6 cylinder engine Horse Power: Capable of Boosting Horse Power up to 420HPCooling Type: Oil Cooled Maximum PSI 18（1.2 Bar） Specification Exhaust Inlet (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns Exhaust Outlet (Downpipe) Flange: V-Band Flange Turbine Trim: 73 Turbine Inducer Diameter:65.5 mm Turbine Exducer Diameter: 55.9mm Turbine A/R: 0.63 Compressor Trim: 55 Compressor Inducer Diameter: 50.5 mm Compressor Exducer Diameter: 76 mm Compressor A/R: 0.5 Bearing: Journal Bearing Warranty: one year Internal Wastegate: Yes Oil Specifications:OIL RETURN LINE: Length: 550mm Inner Diameter: 21mm​OIL FEED LINE: Length: 1000mm Inner Diameter: 14mm Oil Inlet: M12*1.25 2*M8*1.25 Oil Outlet: 2*M8*1.25 Condition: New Bearing Type: Floating Bearing Warranty: one year warranty for any manufacturing defect Accessories: You will get exactly as shown in the picture above Features- Universal turbochargers.- High temperature resistance.- Turbine-driven forced induction device.- Enhance engine power & reduce energy consumption.- Improve fuel economy & reduce exhaust emissions. Notice* Please check the specifications carefully before placing orders. If you are not sure about these information, please feel free to contact us.* This is universal application turbo, so modification might be required for some vehicles.* Please check our store for other auto parts you may be interested in.* No instruction included; Professional installation & alignment suggested.* Replace, repair or reconnect air cleaner element per manufacturer's manual to avoid compressor wheel damage.* Make sure the oil drain line is lower than the turbo itself.* Gasoline car must install a water cooling device to avoid overheating.* Ensure exhaust outlet are well sealed by welding. ...

Introductionma Xpeedingrods T6 lowering coil-over, standard with adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plate（for some vehicles), & decent outlook, offers you more ability to tune your suspension on performance & gives your vehicle more impressive appearance. Besides, all our coil-overs are assembled in a dust-free factory, which turns out good quality & long life. Application Compatible For Nissan Sentra SE-R B15 2000-2006 Compatible For Nissan Sunny N16 2000-2006 Compatible For Nissan Bluebird Sylphy (G10/N16) Japan Market Compatible For Nissan Almera (N16) Europe Market Compatible For Nissan Pulsar (N16) New Zealand Australia Market Specifications Top mount: Front pillow ball；rear rubberdamping: 24 ways damping adjustable Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Spring length Front: 230mm Spring length Rear: 220mm Adjustable

Height: lowerin...

...

Introductionma Xpeedingrods T6 lowering coil-over, standard with adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plate（for some vehicles), & decent outlook, offers you more ability to tune your suspension on performance & gives your vehicle more impressive appearance. Besides, all our coil-overs are assembled in a dust-free factory, which turns out good quality & long life. Application Compatible For Nissan Sentra B16 2007- 2012 Specification Damping adjustable: Available, 24 levels of rebound damping force Shock structure type: twin -tube Camber adjustable: Available Height adjustable: Yes, lowering 25-75mm depending on the vehicle models Spring Rate Front: 8 kg/mm (448 in/lbs) Spring Rate Rear: 5 kg/mm (280 lbs/in) Spring length Front: 180 mm Spring length Rear: 180 mm Spring Preload advised: 7-10 mm
Colour: Black body with blue spring Warranty: one year warranty for any manufacturing defect P...
...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket height adjustable coilovers suspension kit compatible for Nissan series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Nissan Sentra B15 2000-2006 Compatible for Nissan Sunny N16 2000-2006 Compatible for Nissan Bluebird Sylphy (G10/N16) Japan Market Compatible for Nissan Almera (N16) Europe Market Compatible for Nissan Pulsar (N16) New Zealand & Australia Market

Specification- Quantity: 2 piece front + 2 pieces rear + 2 spanners - Spring rate Front: 10 kg/mm (560 lbs/in) - Spring rate Rear: 7 kg/mm (392 lbs/in) - Damper: Non adjusta...


...

Application Compatible for NISSAN SKYLINE 1993-1998 ECR33 GTS-25T TYPE M compatible for NISSAN SKYLINE 1993-1998 ER33 GTS25 TYPE S compatible for NISSAN SKYLINE 1993-1998 HR33 GTS, GTS TYPE S NOTE:REAR BOTTOM EYE BUSH STYLE ONLY. Specification Top mounts: standard rubber top mount front & rear Damping: 24 levels rebound damping adjustable Spring rate Front: 10 kg/mm (560lbs/in) Spring rate Rear: 8 kg/mm (448 lbs/in) Spring length Front: 180mm Spring length Rear: 230mm Adjustable

Height: lowering 1-3inch Coilover overall length Front: 420mm-510mm Coilover overall length Rear: 550mm-750mm Shock type: Twin tube Spring preload: 7-10 mm
Colour: Gold Package included 2 piece front + 2 pieces rear as pictures show Dimension
Size: 70*50*20 cm Weight: 24.58kg Feature Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more...




...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket height adjustable coilovers suspension kit compatible for Nissan series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Nissan Skyline R33 GTS GTST 1993-1998 Specification Top mounts: standard rubber top mount front & rear Quantity: 2 pieces front + 2 pieces rear Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 8 kg/mm (448 lbs/in) Adjustable Damper: Not adjustable Adjustable

Height: Yes lowering 1" to 3" Shock type: Twin tube Spring preload: 7-10 mm Adjustable camber plate: NO
Colour: Golden Warranty: one year warranty for any manufacturing defect Feature- Adjustable ride height- Adjustable pre-load spring tension- Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response- Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down.- Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.
- All inserts come with fitted rubber boots to protect the damper & keep clean.- Improve your handling performance without sacrifice comfortable ride.- A fast & affordable way to easily upgrade your car's appearance.- Easy installation with right tools.- Ideal for any track, drift & fast road & can also be used for daily driving. Note- No instruction included; Professional installation is highly recommended.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.





...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket height adjustable coilovers suspension kit compatible for Nissan series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Nissan Skyline R33 GTS GTST 1993-1998 Specification Top mounts: standard rubber top mount front & rear Quantity: 2 pieces front + 2 pieces rear Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 8 kg/mm (448 lbs/in) Adjustable Damper: Not adjustable Adjustable

Height: Yes lowering 1" to 3" Shock type: Twin tube Spring preload: 7-10 mm Adjustable camber plate: NO
Colour: Golden Warranty: one year warranty for any manufactu...



...

Introduction Ma Xpeeding Rods T6 lowering coilover, standard with adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plate（for some vehicles) & decent outlook, offers you more ability to tune your suspension on performance & gives your vehicle more impressive appearance. Besides, all our coilover are assembled in dust-free factory, which turns out good quality & long life. Application Compatible For NISSAN SKYLINE 1993-1998 ECR33 GTS-25T TYPE MCompatible For NISSAN SKYLINE 1993-1998 ER33 GTS25 TYPE SCompatible For NISSAN SKYLINE 1993-1998 HR33 GTS, GTS TYPE SNOTE:REAR BOTTOM EYE BUSH STYLE ONLY. Specifications Top mounts: standard rubber top mount front & rear Damping: 24 levels rebound damping adjustable Spring rate Front: 10 kg/mm (560lbs/in) Spring rate Rear: 8 kg/mm (448 lbs/in) Spring length Front: 180mm Spring length Rear: 230mm Adjustable

Height: lowering 1-3inch Coilover overall lengt...

...

Introduction A carburetor is a device to mix air & fuel for internal combustion engines in the proper ratio for combustion. The fuel & air mixture is too rich if it has an excess of fuel, while too lean if there is not enough. Therefore, our high quality carburetor is the perfect solution for the appropriate ratio of air & fuel mixture & finally provides a good engine performance. Application Compatible for Nissan/ Compatible for Datsun Sunny B210 A12 engine: Compatible for Nissan SUNNY TRUCK 1979-1981 Compatible for Nissan Vanette 1978-1979 Compatible for Nissan Sunny 1966-1982 Compatible for Nissan Pulsar 1977-1980 Compatible for Nissan Cherry 1970-1978 Part Number 16010H160216010-H160216010 H1602 Specification Condition: 100% Brand New
Material: Zinc Alloy No. of Cylinders: 4 Displacement: 1.3-3.2 L Measurement Of Base: 36x 63mm (Center To Center) Measurement Of Main Barrel: 26mm Measurement Of Second Barrel: 30mm Type： Manual Choke Choke Air Horn Inner Diameter：54mm Choke Air Horn Outer Diameter:5...
...