Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket height adjustable coilovers suspension kit compatible for Nissan series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Nissan Sentra B15 2000-2006 Compatible for Nissan Sunny N16 2000-2006 Compatible for Nissan Bluebird Sylphy (G10/N16) Japan Market Compatible for Nissan Almera (N16) Europe Market Compatible for Nissan Pulsar (N16) New Zealand & Australia Market

Specification- Quantity: 2 piece front + 2 pieces rear + 2 spanners - Spring rate Front: 10 kg/mm (560 lbs/in) - Spring rate Rear: 7 kg/mm (392 lbs/in) - Damper: Non adjusta...


...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket height adjustable coilovers suspension kit compatible for Nissan series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Nissan Sentra B15 2000-2006 Compatible for Nissan Sunny N16 2000-2006 Compatible for Nissan Bluebird Sylphy (G10/N16) Japan Market Compatible for Nissan Almera (N16) Europe Market Compatible for Nissan Pulsar (N16) New Zealand & Australia Market

Specification- Quantity: 2 piece front + 2 pieces rear + 2 spanners - Spring rate Front: 10 kg/mm (560 lbs/in) - Spring rate Rear: 7 kg/mm (392 lbs/in) - Damper: Non adjusta...


...

Application Compatible for NISSAN SKYLINE 1993-1998 ECR33 GTS-25T TYPE M compatible for NISSAN SKYLINE 1993-1998 ER33 GTS25 TYPE S compatible for NISSAN SKYLINE 1993-1998 HR33 GTS, GTS TYPE S NOTE:REAR BOTTOM EYE BUSH STYLE ONLY. Specification Top mounts: standard rubber top mount front & rear Damping: 24 levels rebound damping adjustable Spring rate Front: 10 kg/mm (560lbs/in) Spring rate Rear: 8 kg/mm (448 lbs/in) Spring length Front: 180mm Spring length Rear: 230mm Adjustable

Height: lowering 1-3inch Coilover overall length Front: 420mm-510mm Coilover overall length Rear: 550mm-750mm Shock type: Twin tube Spring preload: 7-10 mm
Colour: Gold Package included 2 piece front + 2 pieces rear as pictures show Dimension
Size: 70*50*20 cm Weight: 24.58kg Feature Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more...




...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket height adjustable coilovers suspension kit compatible for Nissan series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Nissan Skyline R33 GTS GTST 1993-1998 Specification Top mounts: standard rubber top mount front & rear Quantity: 2 pieces front + 2 pieces rear Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 8 kg/mm (448 lbs/in) Adjustable Damper: Not adjustable Adjustable

Height: Yes lowering 1" to 3" Shock type: Twin tube Spring preload: 7-10 mm Adjustable camber plate: NO
Colour: Golden Warranty: one year warranty for any manufacturing defect Feature- Adjustable ride height- Adjustable pre-load spring tension- Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response- Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down.- Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.
- All inserts come with fitted rubber boots to protect the damper & keep clean.- Improve your handling performance without sacrifice comfortable ride.- A fast & affordable way to easily upgrade your car's appearance.- Easy installation with right tools.- Ideal for any track, drift & fast road & can also be used for daily driving. Note- No instruction included; Professional installation is highly recommended.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.





...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket height adjustable coilovers suspension kit compatible for Nissan series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Nissan Skyline R33 GTS GTST 1993-1998 Specification Top mounts: standard rubber top mount front & rear Quantity: 2 pieces front + 2 pieces rear Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 8 kg/mm (448 lbs/in) Adjustable Damper: Not adjustable Adjustable

Height: Yes lowering 1" to 3" Shock type: Twin tube Spring preload: 7-10 mm Adjustable camber plate: NO
Colour: Golden Warranty: one year warranty for any manufactu...



...

Introduction A carburetor is a device to mix air & fuel for internal combustion engines in the proper ratio for combustion. The fuel & air mixture is too rich if it has an excess of fuel, while too lean if there is not enough. Therefore, our high quality carburetor is the perfect solution for the appropriate ratio of air & fuel mixture & finally provides a good engine performance. Application Compatible for Nissan/ Compatible for Datsun Sunny B210 A12 engine: Compatible for Nissan SUNNY TRUCK 1979-1981 Compatible for Nissan Vanette 1978-1979 Compatible for Nissan Sunny 1966-1982 Compatible for Nissan Pulsar 1977-1980 Compatible for Nissan Cherry 1970-1978 Part Number 16010H160216010-H160216010 H1602 Specification Condition: 100% Brand New
Material: Zinc Alloy No. of Cylinders: 4 Displacement: 1.3-3.2 L Measurement Of Base: 36x 63mm (Center To Center) Measurement Of Main Barrel: 26mm Measurement Of Second Barrel: 30mm Type： Manual Choke Choke Air Horn Inner Diameter：54mm Choke Air Horn Outer Diameter:5...
...

Application Compatible for Infiniti QX56compatible for V8-5.6 2004-2006 compatible for Nissan Armadacompatible for V8-5.6 2005-2006 compatible for Nissan Titan compatible for V8-5.6 2004-2006 Specification Position: Upstream & Downstream Reference OEM :234-4835, 234-5060 Package Include: 4 Pcs Oxygen Sensors (Upstream & Downstream) as Pictured Feature- Our oxygen sensors are designed to determine the oxygen content of the exhaust gas & to improve the fuel efficiency of the vehicle. - With high quality materials that ensure enhanced performance & long lasting durability. - These sensors facilitate easy installation & are corrosion resistant. - Tough & highly efficient oxygen sensor is a must for vehicles used for off road applications. - Our oxygen sensor is one of the good choices that you can include on top of your list. - Our finest top quality oxygen sensors can boost the optimum capacity of your car. Note- Please check OE with listed pictures above & make sure it fits you vehicle. -... ...

Introductionma Xpeedingrods T6 lowering coil-over, standard with adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plate（for some vehicles), & decent outlook, offers you more ability to tune your suspension on performance & gives your vehicle more impressive appearance. Besides, all our coil-overs are assembled in a dust-free factory, which turns out good quality & long life. Application Compatible For Nissan Versa (N17 chassis ) 2013-2019 Compatible For Nissan Versa Note (E12 chassis ) 2014-2019 Specification Top mounts: Front & rear OE top mounts required Damping adjustable: Available, 24 levels of rebound damping force Shock structure type: twin -tube Camber adjustable: Not available Height adjustable: Yes, lowering 25-75mm depending on the vehicle models Spring Rate Front: 4 kg/mm (224 lbs/in) Spring Rate Rear: 5 kg/mm (280 lbs/in) Spring length Front: 200 mm Spring length Rear: 193 mm... ...

Application 1983-2005 compatible for Chevy Blazer / S10 2WD 1983-2005 compatible for GMC Jimmy / S15 / Sonoma 2wd 1991-2004 compatible for Oldsmobile Bravada 2WDSpecifications Condition: New Warranty: one year warranty for any manufacture defect Package
Includes:: 2x Adjustable adapter plates 2x Bolts 2x Nuts 4x Rings Features- CNC Laser cut from high-strength steel for superior strength. - Allows installation of compatible for Small Block engines (for SBC). - Used for engines with 3-bolt style mount. - Adjustable design for perfect engine alignment. - Special Teflon-blend coating for max corrosion resistance. -

Includes:: high-tensile strength installation hardware. Notice Please feel free to contact us for whatever we can help.


...

Introduction An ignition coil/spark coil is an induction coil in an automobile's ignition system that transforms the battery's low voltage to the thousands of volts needed to create an electric spark in the spark plugs to ignite the fuel. The amount of energy in the spark required to ignite the air-fuel mixture varies depending on the pressure & composition of the mixture, & on the speed of the engine. An ignition coil consists of a laminated iron core surrounded by two coils of copper wire. Maxpeedingrods provides ignition coils compatible for Onan series. Application Compatible for Onan Ignition Coil for Points Models Engines 166-0772 BF B43 B48 NHC CCK 316
- Must have the P218G engine Serial numbers 420, 001 to 999, 000 & Serial numbers 10, 001 to 120, 000 317
- Must have the compatible for Onan P218G engine in the tractor No serial number range is affected, you must check your engine model. If you have the engine compatible for Kohler in your 317, this coil will not work. 318
- Must have the P218G engine Serial numbers 420, 001 to 999, 000 & Serial numbers 10, 001 to 120, 000 420
- Must have the P220G engine Serial numbers 420, 001 & above. Specifications OEM Number: 541-0522, 166-0820, 166-0772, HE166-0761, HE541-0522, c 32296, 714000, NN10245, 98-1705 Package Included: 1 Set Ignition Coil as picture shows Condition: New Warranty: one year warranty for any manufacturing defect Features- Solid construction - Aftermarket direct compatible for Onan Ignition Coil for Point Model Engines - Increased Ignition Performance --- High voltage output & spark energy - Designed for comfortable use & best quality - Replacement of the original item (safety, accuracy, service life & quality) - High-quality materials for high durability & long service life Notice- Please ensure the product's surface & OEM Number are as same as yours. - No instruction included; Professional installation & alignment suggested. - Please check our store for other auto parts you may be interested in. - Please feel free to contact us for whatever we can help.



...