Applicationfor S14 Silvia 1994-1998 (Japan Market) for S14 200SX 1994-1998 (Europe / Australia/ New Zealand Market) for S14 240SX 1995-1998 (USA Market) Note: Don't compatible for Nissan 200SX SE Specification Top mounts: pillow ball top mount with camber plate front, standard rubber top mount rear Damping: No adjustable damper force Front Spring Rate:8kg/mm (448 lbs/in). Rear Spring Rate: 6kg/mm (336lbs/in). Adjustable

Height: Yes lowering 1" to 3". Shock type: Twin tube. Spring Preload: 7-10 mm.
Colour: blue. Package includedproduct included: complete coilovers 2 front & 2 rear, a pair wrench for height adjustment. Dimension Gross weight: 27kg Package

Size: 70*52*22cm Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2. Camber plate top mounts help to eliminate the need for a separate camber kit.（ Only Front) 3. Pillow ball top mount
- It improves the steering feel & response.（ Only Front ) 4. Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts. (Only Rear) 5. Twin-Tube structure allows sufficient stroke within the shock absorber. 6. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. 7. Separate height adjustment does not affect damper stroke. 8. Height can be adjusted with coilovers installed on the vehicle. 9. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 10. Height Adjustment tools included. 11. Full rebuildable.







...

Applicationfor S14 Silvia 1994-1998 (Japan Market) for S14 200SX BASE MODEL/ LE 1994-1998 (Europe / Australia/ New Zealand Market) for S14 240SX BASE MODEL/ LE/SE 1995-1998 (USA Market) Note: Don't compatible for Nissan 200SX SE /SE-R Specification Top mounts: pillow ball top mount with camber plate front, standard rubber top mount rear Damping: No adjustable damper force Spring rate Front: 8 kg/mm (448 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in) Spring length Front: 180mm Spring length Rear: 255mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 420mm-470mm Coilover overall length Rear: 550mm-700mm Shock type: Twin tube. Spring Preload: 7-10 mm.
Colour: gold. Package includedproduct included: complete coilovers 2 front & 2 rear, a pair wrench for height adjustment. Dimension Gross weight: 26.06kg Package

Size: 71*51*21cm Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2. Camber plate top moun...





...

Applicationfor S14 Silvia 1994-1998 (Japan Market) for S14 200SX BASE MODEL/ LE 1994-1998 (Europe / Australia/ New Zealand Market) for S14 240SX BASE MODEL/ LE/SE 1995-1998 (USA Market) Note: Don't compatible for Nissan 200SX SE /SE-R Specification Top mounts: pillow ball top mount with camber plate front, standard rubber top mount rear Damping: 24 levels rebound damping adjustable Spring rate Front: 8 kg/mm (448 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in) Spring length Front: 180mm Spring length Rear: 255mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 420mm-470mm Coilover overall length Rear: 550mm-700mm Shock type: Twin tube. Spring Preload: 7-10 mm.
Colour: gold. Package includedproduct included: complete coilovers 2 front & 2 rear, a pair wrench for height adjustment. Dimension Gross weight: 26.06kg Package

Size: 71*51*21cm Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2. Camber pla...





...

Introduction A turbocharger (also called turbo), is a turbine-driven forced induction device that increases an internal combustion engine’s efficiency & power output by forcing extra air into the combustion chamber. The key difference between a turbocharger & a conventional supercharger is precisely that a turbocharger is powered by a turbine driven by the engine's exhaust gas. A turbo consists of a compressor, a cartridge, a turbine & an exhaust valve. Maxpeedingrods provides universal turbochargers to enhance overall engine performance of your beloved car. Application Compatible for 1.5L to 2.5L any 4/6 cylinder engine Horse Power: Capable of Boosting Horse Power up to 420HPCooling Type: Oil Cooled Maximum PSI 18（1.2 Bar） Specification Exhaust Inlet (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns Exhaust Outlet (Downpipe) Flange: V-Band Flange Turbine Trim: 73 Turbine Inducer Diameter:65.5 mm Turbine Exducer Diameter: 55.9mm Turbine A/R: 0.63 Compressor Trim: 55 Compressor Inducer Diameter: 50.5 mm Compressor Exducer Diameter: 76 mm Compressor A/R: 0.5 Bearing: Journal Bearing Warranty: one year Internal Wastegate: Yes Oil Specifications:OIL RETURN LINE: Length: 550mm Inner Diameter: 21mm​OIL FEED LINE: Length: 1000mm Inner Diameter: 14mm Oil Inlet: M12*1.25 2*M8*1.25 Oil Outlet: 2*M8*1.25 Condition: New Bearing Type: Floating Bearing Warranty: one year warranty for any manufacturing defect Accessories: You will get exactly as shown in the picture above Features- Universal turbochargers.- High temperature resistance.- Turbine-driven forced induction device.- Enhance engine power & reduce energy consumption.- Improve fuel economy & reduce exhaust emissions. Notice* Please check the specifications carefully before placing orders. If you are not sure about these information, please feel free to contact us.* This is universal application turbo, so modification might be required for some vehicles.* Please check our store for other auto parts you may be interested in.* No instruction included; Professional installation & alignment suggested.* Replace, repair or reconnect air cleaner element per manufacturer's manual to avoid compressor wheel damage.* Make sure the oil drain line is lower than the turbo itself.* Gasoline car must install a water cooling device to avoid overheating.* Ensure exhaust outlet are well sealed by welding. ...

Introductionma Xpeedingrods T6 lowering coil-over, standard with adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plate（for some vehicles), & decent outlook, offers you more ability to tune your suspension on performance & gives your vehicle more impressive appearance. Besides, all our coil-overs are assembled in a dust-free factory, which turns out good quality & long life. Application Compatible For Nissan Sentra SE-R B15 2000-2006 Compatible For Nissan Sunny N16 2000-2006 Compatible For Nissan Bluebird Sylphy (G10/N16) Japan Market Compatible For Nissan Almera (N16) Europe Market Compatible For Nissan Pulsar (N16) New Zealand Australia Market Specifications Top mount: Front pillow ball；rear rubberdamping: 24 ways damping adjustable Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Spring length Front: 230mm Spring length Rear: 220mm Adjustable

Height: lowerin...

...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket height adjustable coilovers suspension kit compatible for Nissan series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Nissan Sentra B15 2000-2006 Compatible for Nissan Sunny N16 2000-2006 Compatible for Nissan Bluebird Sylphy (G10/N16) Japan Market Compatible for Nissan Almera (N16) Europe Market Compatible for Nissan Pulsar (N16) New Zealand & Australia Market

Specification- Quantity: 2 piece front + 2 pieces rear + 2 spanners - Spring rate Front: 10 kg/mm (560 lbs/in) - Spring rate Rear: 7 kg/mm (392 lbs/in) - Damper: Non adjusta...


...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket height adjustable coilovers suspension kit compatible for Nissan series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Nissan Sentra B15 2000-2006 Compatible for Nissan Sunny N16 2000-2006 Compatible for Nissan Bluebird Sylphy (G10/N16) Japan Market Compatible for Nissan Almera (N16) Europe Market Compatible for Nissan Pulsar (N16) New Zealand & Australia Market

Specification- Quantity: 2 piece front + 2 pieces rear + 2 spanners - Spring rate Front: 10 kg/mm (560 lbs/in) - Spring rate Rear: 7 kg/mm (392 lbs/in) - Damper: Non adjusta...


...

Application Compatible for NISSAN SKYLINE 1993-1998 ECR33 GTS-25T TYPE M compatible for NISSAN SKYLINE 1993-1998 ER33 GTS25 TYPE S compatible for NISSAN SKYLINE 1993-1998 HR33 GTS, GTS TYPE S NOTE:REAR BOTTOM EYE BUSH STYLE ONLY. Specification Top mounts: standard rubber top mount front & rear Damping: 24 levels rebound damping adjustable Spring rate Front: 10 kg/mm (560lbs/in) Spring rate Rear: 8 kg/mm (448 lbs/in) Spring length Front: 180mm Spring length Rear: 230mm Adjustable

Height: lowering 1-3inch Coilover overall length Front: 420mm-510mm Coilover overall length Rear: 550mm-750mm Shock type: Twin tube Spring preload: 7-10 mm
Colour: Gold Package included 2 piece front + 2 pieces rear as pictures show Dimension
Size: 70*50*20 cm Weight: 24.58kg Feature Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more...




...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket height adjustable coilovers suspension kit compatible for Nissan series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Nissan Skyline R33 GTS GTST 1993-1998 Specification Top mounts: standard rubber top mount front & rear Quantity: 2 pieces front + 2 pieces rear Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 8 kg/mm (448 lbs/in) Adjustable Damper: Not adjustable Adjustable

Height: Yes lowering 1" to 3" Shock type: Twin tube Spring preload: 7-10 mm Adjustable camber plate: NO
Colour: Golden Warranty: one year warranty for any manufacturing defect Feature- Adjustable ride height- Adjustable pre-load spring tension- Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response- Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down.- Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.
- All inserts come with fitted rubber boots to protect the damper & keep clean.- Improve your handling performance without sacrifice comfortable ride.- A fast & affordable way to easily upgrade your car's appearance.- Easy installation with right tools.- Ideal for any track, drift & fast road & can also be used for daily driving. Note- No instruction included; Professional installation is highly recommended.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.





...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket height adjustable coilovers suspension kit compatible for Nissan series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Nissan Skyline R33 GTS GTST 1993-1998 Specification Top mounts: standard rubber top mount front & rear Quantity: 2 pieces front + 2 pieces rear Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 8 kg/mm (448 lbs/in) Adjustable Damper: Not adjustable Adjustable

Height: Yes lowering 1" to 3" Shock type: Twin tube Spring preload: 7-10 mm Adjustable camber plate: NO
Colour: Golden Warranty: one year warranty for any manufactu...



...