Application Compatible for BMW 5 7 Series F01/02/04 F07/F11 2009-20162010
- 2016 Compatible for BMW 535i GT2011
- 2016 Compatible

...

Application Compatible for BMW E46 3 Series 1998-2005 316i, 316i/ti, 318i/ Ci, 318i/ Ci/ti, 318 Ci, 320i, 320i/ Ci, 323i/ Ci, 325i/xi/ Ci/ti (EUR), 328i/ Ci, 330i/xi/ Ci, M3 Do not compatible for BMW Compact Specification Quantity: One set with 2 pieces Adjustable Timing Mark: YESBushing: Pillow Ball deisgn for adjustment precisely
Colour: Golden Warranty: one year warranty for any manufacturing defect Condition: New Feature* All components are carefully selected with the quality material for durable use* Super strong & significant improvement for drifting cars* Adjust camber independent of caster* Large range of adjustment while still allowing caster & camber to be adjusted from the top without cutting the strut tower* Maintain proper strut angle at any position by not pre-setting the angle* Provide proper orientation with a replaceable urethane bushing* Minimize noise associated with the urethane bushing Note* Please check the camber plate adjustment range below before buying* These camber plates...
...

Application Compatible for BMW E30 M3 S14B23 88-91 L4 Specification TÜV Certification Con Rods Type: Forged 4340 aircraft chrome moly quality steel for racing H-beam Conrods Quantity:1 set of 4 pieces Bolts: Including Genuine ARP 2000 bolts Note: Extra cost for upgrading to ARP L19 bolts Bolts

Size: 3/8" ARP 2000 bolts Tolerance: Balanced to +/- 1 gram in set Piston Bolt Hole: +-4/1000mm Power: 600hp ~ 800hp per set Strength of the fastening (PSI): 220, 000/230, 000 PSI Torque: 48ft ≈ 65 NM Top acceleration: 9000rpm warranty: one year Dimensions Center to center length: 144mm Big end diameter: 52mm Small end diameter: 22mm Big end

Width: 24mm Small end

Width: 24mm Feature- Forged SAE 4340 Chrome Moly Steel for the highest strength & durability, dedicated for Racing - Designed & processed by CNC machine. - All big & small ends are finished with SUNNEN honing machine - Precision alignment sleeves positively locate the rod cap, maintaining big end bore size & eliminating cap walk - 100% X-rayed, s...





...

Application Compatible for BMW E30 316/316i/ 318i/ 320i/ 323i/ 325i/ 324D/324TD Saloon 1982.11-1991.1 Notice: Compatible for BMW E30 Saloon 51mm front strut diameter only The coilovers will compatible for BMW E30 316/316i/ 318i/ 320i/ 323i/ 325i/ 324D/324TD Saloon 1982 -1988 models, but it may not lower the car as much as the late model, because the rear chassis is different. Compatible for BMW E30 316 1988.11-1991.1, the coilovers can fit earlier models except 1. Pre 1988 1.6L 1.8L. Specification Quantity:-2 front+2 rear shocks-2 C- Spanners for adjustment-2 rear Springs+2 front Springs-Front Bump stops & dust covers Spring Rate: 7 kg/mm (392 lbs/in) ; 6 kg/mm (336 lbs/in) Damper: Non Adjustable Damper Adjustable

Height: YESWarranty: one year warranty for any manufacturing defect Feature- Adjustable ride height- Adjustable pre-load spring tension- Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the...

...

Application Compatible for BMW 3 Series (E36) 1991–1998 Europe Compatible for BMW 3 Series (E36) 1992—1999 US & Canada Compatible for BMW E36 318i, 318is, 318ic, 323i, 323ic, 323is, 325i, 325is, 325ic, 328i, 328is, 328ic, M3（except 318TI Compact） -- For Coilover Only Description Condition: New Quantity: One set with 2 pieces Adjustable Timing Mark: YES Bushing: Pillow Ball deisgn for adjustment precisely
Colour: Golden Warranty: one year warranty for any manufacturing defect Feature
- All components are carefully selected with the qualitymaterial for durable use
- Super strong & significant improvement for driftingcars- Adjust camber independent of caster- Large range of adjustment while still allowing caster andcamber to be adjusted from the top without cutting thestrut tower
- Maintain proper strut angle at any position by not pre-setting theangle
- Provide proper orientation with a replaceable urethanebushing- Minimize noise associated with the urethane bushing Notice
- With pillow ball...





...

Application Compatible for BMW M40/M42/M43/M44 Engine compatible for BMW E30 316i/318i M40B16 M42B18 compatible for BMW E30 318i S M42B18 compatible for BMW E34 518i M40B18 compatible for BMW E36 316i/318i/318ti M40B18 M43B16 M42B18 compatible for BMW E36 318i S M42B18 compatible for BMW E36 318i S/318ti M44B19 Pin Type: Floating Pin Piston Specification* Type: Forged 4340 aircraft chrome moly quality steel for racing *H-beam Conrods Quantity: 4 Pieces as showing in picture * Bolts: Including ARP 2000 3/8" bolts  (Note: Extra cost for upgrading to ARP L19 bolts) * The connecting rods all include ARP 2000 bolts, which are rated at 220, 000 psi, & the optional ARP L19 material at 260, 000 psi is available as an upgraded product. * Advertised Horsepower Rating:200HP/piece * Top acceleration: 9000rpm *package size：28CM*21CM*10CMDimension Center to center length:140mm/5.512" Big end diameter:48mm/1.89" Small end diameter:22mm/0.866" Big end
Width:21.9mm/0.862" Sm...
...

Application Compatible for E36 models 3-series 92-98: 318i, 318is, 318ic, 320i, 323i, 323ic, 323is, 325i, 325is, 325ic, 328i, 328is, 328ic, M3 (will not fit 318ti) Compatible for E46 models 3-series 99-05:320i, 323i, 323ci, 323cic, 325i, 325ci, 325cic, 325xi, 328i, 328ci, 328cic, 330i, 330ci, 330cic, M3 Compatible for E83 Models X3:2.5i, 2.5si, 3.0i, 3.0si through 2010 for E85 E86 Models Z4: 2.5i, 2.5si, 3.0i, 3.0si, M-Roadster (will not fit M-Coupe) Compatible for E89 Models Z4: 30i, 35i, 35is 09-current Specification 1.
Material: Steel, rubber 2. Installation location: Rear, Lower, Left, Right 3.
Colour: Blue/ Red/ Black/ Chrome/green/golden 4. Eye-to-eye Length range :525-570mm/20.67''-22.44'' 5. Camber Adjustment: -1.0 To +3.0 Degrees 6. Weight：3.65kg 7. Package Dimensions：61*13*9cm 8. Surface finish: Powder-Coated 9. Bushing Inner diameter、width：φ12、55.5mm Outer diameter、width：φ32、32mm 10. Nuts：M18*1.5 Package included 1 x Pair of Rear Lower Adjustable Camber Arm Kit (Left Right) Feature 1....

...

Application Control Arm: Fit for: E36 models; 3-series 92-98 (318i, 318is, 318ic, 323i, 323ic, 323is, 325i, 325is, 325ic, 328i, 328is, 328ic, M3) (will not fit 318ti) E46 models; 3-series 99-05 (323i, 323ci, 323cic, 325i, 325ci, 325cic, 325xi, 328i, 328ci, 328cic, 330i, 330ci, 330cic, M3) E83 Models: X3 – 2.5i, 2.5si, 3.0i, 3.0sithrough 2010 E85 E86 Models: Z4 – 2.5i, 2.5si, 3.0i, 3.0si, M-Roadster (will not fit M-Coupe) E89 Models: Z4– 3oi, 35i, 35is 09-current Camber Plate: Fit for: Compatible for BMW3 Series (E36)1991–1998 Europe compatible for BMW3 Series (E36)1992—1999US Canada Fit Models: Compatible for BMW E36 3 Series 318 320 323 325 M3, 318i, 318is, 318ic, 323i, 323ic, 323is, 325i, 325is, 325ic, 328i, 328is, 328ic, M3 Specification Quantity: 2 Pair as shown Pair Camber Arms Pair Camber Plates
Colour: Red Warranty: one year for any manufacturing defect Features* New in box * Made by high strength steel & durable Powder-Coated Finish * enhanced suspension geometry to reduce bump steer * Adjust Camber Independent of Caster * Design for Street, Track or Drift Racing Precise Adjustments with Long Service Life * Large Range of Adjustment While Still Allowing Caster & Camber to be Adjusted From the Top Without Cutting the Strut Tower * These camber plates will NOT fit OEM stock springs * Professional Installer is Highly Recommended (No Instruction Included) * Alignment Highly Recommended After Install Notice* Control Arm do not fit 318ti * Please feel free to contact us for whatever we can help * Instruction is not included. Professional installation is highly recommended
...

Application Compatible for E36 models 3-series 92-98: 318i, 318is, 318ic, 323i, 323ic, 323is, 325i, 325is, 325ic, 328i, 328is, 328ic, M3 (will not fit 318ti) Compatible for E46 models 3-series 99-05: 323i, 323ci, 323cic, 325i, 325ci, 325cic, 325xi, 328i, 328ci, 328cic, 330i, 330ci, 330cic, M3 Compatible for E83 Models X3:2.5i, 2.5si, 3.0i, 3.0si through 2010 for E85 & E86 Models Z4: 2.5i, 2.5si, 3.0i, 3.0si, M-Roadster (will not fit M-Coupe) Compatible for E89 Models Z4: 3oi, 35i, 35is 09-current Specification Package
Includes::1 x Pair of Rear Lower Adjustable Camber Arm Kit (Left & Right)
Material: Steel, rubber Installation location: Rear, Lower, Left, Right
Colour: Blue/ Red/ Black/ Chrome/green/golden Adjustable: Yes Overall Length (Shortest-Longest):435-510mm Notes: Allows For +3.0 To -1.0 Degrees Of Rear Lower Camber Adjustment Weight：3.88kg Package Dimensions：61*15.5*15cm Surface finish: Powder-Coated Feature 1. New Items, Never Used Or Installed 2. Replaces Old, Worn-Out Factory Rear Lower Control Arms With a High Performance Adjustable Unit 3. Corrects Your Camber Suspension By Allowing Fine Tuning of Camber Adjustment Settings From ±3° Degrees For Optimal Performance 4. Rubber bushing for smooth ride comfort Warranty: one year warranty for any manufacturing defect


...

Introductionma Xpeedingrods' B1 series is ideal for those who want to change the old worn out strut but improve handling at same time. It features with height adjustable & maintain the OE ride quality to the greatest extent. Application Compatible for BMW 5 (E39) (1995-2003)RWD notchback model:525 i，530 i，540 i， 520 d，520 i，523 i，525 td，525 tds，528 i 525 d，530 d，535 i Note: Not for Wagon or M5 Models. Will not fit Self Leveling/ Air suspension model. Front OE top mounts need to be modified, add spacer on the shaft. Specification Top mounts: Front & rear OE top mounts required Damping: non-adjustable Spring rate Front: 6 kg/mm (356 lbs/in) Spring rate Rear: 2.5 kg/mm (140 lbs/in) Spring length Front: 140mm Spring length Rear: 355mm Adjustable

Height: lowering 35mm-75mm Coilover overall length Front: 380mm-530mm Coilover overall length Rear: 455mm-655mm Shock type: Twin tube Spring Preload: No
Colour: blue Package includedproduct included: springs & shocks for front & rear...


...