Application ALL compatible for BMW E36 3 Series 318, 320, 323, 325, 328, M3 I, IC, IS, TI -- For Coilover Only Specifications Quantity: One set with 2 pieces Adjustable Timing Mark: YES Bushing: Pillow Ball deisgn for adjustment precisely
Colour: Blue Warranty: one year warranty for any manufacturing defect Condition: New Features
- All components are carefully selected with the quality material for durable use- Super strong & significant improvement for drifting cars
- Adjust camber independent of caster- Large range of adjustment while stillallowing caster & camber to be adjusted from the top without cutting the struttower
- Maintain proper strut angle at any position by not pre-setting the angle
- Provide proper orientation with a replaceable urethane bushing
- Minimize noise associated with the urethane bushing Notice
- With pillow ball bushing, these camber plates will NOT fit OEM stock springs. They will fit coilover spring only.
- The picture with

Dimensions is av...









...

Application Compatible for BMW M40/M42/M43/M44 Engine compatible for BMW E30 316i/318i M40B16 M42B18 compatible for BMW E30 318i S M42B18 compatible for BMW E34 518i M40B18 compatible for BMW E36 316i/318i/318ti M40B18 M43B16 M42B18 compatible for BMW E36 318i S M42B18 compatible for BMW E36 318i S/318ti M44B19 Pin Type: Floating Pin Piston Specification* Type: Forged 4340 aircraft chrome moly quality steel for racing *H-beam Conrods Quantity: 4 Pieces as showing in picture * Bolts: Including ARP 2000 3/8" bolts  (Note: Extra cost for upgrading to ARP L19 bolts) * The connecting rods all include ARP 2000 bolts, which are rated at 220, 000 psi, & the optional ARP L19 material at 260, 000 psi is available as an upgraded product. * Advertised Horsepower Rating:200HP/piece * Top acceleration: 9000rpm *package size：28CM*21CM*10CMDimension Center to center length:140mm/5.512" Big end diameter:48mm/1.89" Small end diameter:22mm/0.866" Big end
Width:21.9mm/0.862" Sm...
...

Application Compatible for E36 models 3-series 92-98: 318i, 318is, 318ic, 320i, 323i, 323ic, 323is, 325i, 325is, 325ic, 328i, 328is, 328ic, M3 (will not fit 318ti) Compatible for E46 models 3-series 99-05:320i, 323i, 323ci, 323cic, 325i, 325ci, 325cic, 325xi, 328i, 328ci, 328cic, 330i, 330ci, 330cic, M3 Compatible for E83 Models X3:2.5i, 2.5si, 3.0i, 3.0si through 2010 for E85 E86 Models Z4: 2.5i, 2.5si, 3.0i, 3.0si, M-Roadster (will not fit M-Coupe) Compatible for E89 Models Z4: 30i, 35i, 35is 09-current Specification 1.
Material: Steel, rubber 2. Installation location: Rear, Lower, Left, Right 3.
Colour: Blue/ Red/ Black/ Chrome/green/golden 4. Eye-to-eye Length range :525-570mm/20.67''-22.44'' 5. Camber Adjustment: -1.0 To +3.0 Degrees 6. Weight：3.65kg 7. Package Dimensions：61*13*9cm 8. Surface finish: Powder-Coated 9. Bushing Inner diameter、width：φ12、55.5mm Outer diameter、width：φ32、32mm 10. Nuts：M18*1.5 Package included 1 x Pair of Rear Lower Adjustable Camber Arm Kit (Left Right) Feature 1....

...

Application Control Arm: Fit for: E36 models; 3-series 92-98 (318i, 318is, 318ic, 323i, 323ic, 323is, 325i, 325is, 325ic, 328i, 328is, 328ic, M3) (will not fit 318ti) E46 models; 3-series 99-05 (323i, 323ci, 323cic, 325i, 325ci, 325cic, 325xi, 328i, 328ci, 328cic, 330i, 330ci, 330cic, M3) E83 Models: X3 – 2.5i, 2.5si, 3.0i, 3.0sithrough 2010 E85 E86 Models: Z4 – 2.5i, 2.5si, 3.0i, 3.0si, M-Roadster (will not fit M-Coupe) E89 Models: Z4– 3oi, 35i, 35is 09-current Camber Plate: Fit for: Compatible for BMW3 Series (E36)1991–1998 Europe compatible for BMW3 Series (E36)1992—1999US Canada Fit Models: Compatible for BMW E36 3 Series 318 320 323 325 M3, 318i, 318is, 318ic, 323i, 323ic, 323is, 325i, 325is, 325ic, 328i, 328is, 328ic, M3 Specification Quantity: 2 Pair as shown Pair Camber Arms Pair Camber Plates
Colour: Red Warranty: one year for any manufacturing defect Features* New in box * Made by high strength steel & durable Powder-Coated Finish * enhanced suspension geometry to reduce bump steer * Adjust Camber Independent of Caster * Design for Street, Track or Drift Racing Precise Adjustments with Long Service Life * Large Range of Adjustment While Still Allowing Caster & Camber to be Adjusted From the Top Without Cutting the Strut Tower * These camber plates will NOT fit OEM stock springs * Professional Installer is Highly Recommended (No Instruction Included) * Alignment Highly Recommended After Install Notice* Control Arm do not fit 318ti * Please feel free to contact us for whatever we can help * Instruction is not included. Professional installation is highly recommended
...

Application Compatible for E36 models 3-series 92-98: 318i, 318is, 318ic, 323i, 323ic, 323is, 325i, 325is, 325ic, 328i, 328is, 328ic, M3 (will not fit 318ti) Compatible for E46 models 3-series 99-05: 323i, 323ci, 323cic, 325i, 325ci, 325cic, 325xi, 328i, 328ci, 328cic, 330i, 330ci, 330cic, M3 Compatible for E83 Models X3:2.5i, 2.5si, 3.0i, 3.0si through 2010 for E85 & E86 Models Z4: 2.5i, 2.5si, 3.0i, 3.0si, M-Roadster (will not fit M-Coupe) Compatible for E89 Models Z4: 3oi, 35i, 35is 09-current Specification Package
Includes::1 x Pair of Rear Lower Adjustable Camber Arm Kit (Left & Right)
Material: Steel, rubber Installation location: Rear, Lower, Left, Right
Colour: Blue/ Red/ Black/ Chrome/green/golden Adjustable: Yes Overall Length (Shortest-Longest):435-510mm Notes: Allows For +3.0 To -1.0 Degrees Of Rear Lower Camber Adjustment Weight：3.88kg Package Dimensions：61*15.5*15cm Surface finish: Powder-Coated Feature 1. New Items, Never Used Or Installed 2. Replaces Old, Worn-Out Factory Rear Lower Control Arms With a High Performance Adjustable Unit 3. Corrects Your Camber Suspension By Allowing Fine Tuning of Camber Adjustment Settings From ±3° Degrees For Optimal Performance 4. Rubber bushing for smooth ride comfort Warranty: one year warranty for any manufacturing defect


...

Introduction Ma Xpeeding Rods T7 series (also known as SP2) lowering coilover, are designed for daily street use & occassional track use. It features withracing damping oil, upgraded racing spring, full length height adjustable & adjustable camber plate (applicable for some vehicles), which offers you a lowered stance & enhanced handling. Application Compatible For BMW 3 (E46) 4-door sedan 318i; 330i; 325i; 328i; 318d; 320d; 320i, 325i ;330d (02/1998-04/2005) Compatible For BMW 3 2-door Convertible (E46) 318i; 330ci; 325ci;323ci; 320cd, 330cd (04/2000-12/2007) Compatible For BMW 3 2-door Coupe (E46) 318i; 320ci; 325ci; 330ci;320cd; 330cd; (02/1999-12/2006) Compatible For BMW 3 Touring 5-door wagon/estate (E46) 316i; 318i; 325i; 328i; 330i; 323i; 325i; 318d; 320d; 330d; (10/1999-05/2005) Note: not for Xi/xd 4 wheel drive, not for M3 model either Specification Front top mounts: pillow ball top mount with camber plate Rear top mounts: pillow ball top mounts Damping: 24 levels rebound damping adjusta... ...

Introduction Ma Xpeeding Rods T7 series lowering coilover, are designed for daily street use & occassional track use. It features withracing damping oil, upgraded racing spring, full length height adjustable & adjustable camber plate (applicable for some vehicles), which offers you a lowered stance & enhanced handling. Application Compatible For BMW 3 (E46) 4-door sedan 318i; 330i; 325i; 328i; 318d; 320d; 320i, 325i ;330d (02/1998-04/2005) Compatible For BMW 3 2-door Convertible (E46) 318i; 330ci; 325ci;323ci; 320cd, 330cd (04/2000-12/2007) Compatible For BMW 3 2-door Coupe (E46) 318i; 320ci; 325ci; 330ci;320cd; 330cd; (02/1999-12/2006) Compatible For BMW 3 Touring 5-door wagon/estate (E46) 316i; 318i; 325i; 328i; 330i; 323i; 325i; 318d; 320d; 330d; (10/1999-05/2005) Note: not for Xi/xd 4 wheel drive, not for M3 model either Specification Front top mounts: pillow ball top mount with camber plate Rear top mounts: pillow ball top mounts Damping: 24 levels rebound damping adjustable Spring rate Front... ...

Introductionma Xpeedingrods' MXR-S1 series is ideal for those who want to change the old worn-out strut but improve handling at same time. It features with height adjustable & maintain the OE ride quality to the greatest extent. Application Compatible for BMW 3 (E46) 4-door sedan 330i; 325i; 328i; 318d; 320d; 320i, 325i ;330d (02/1998-04/2005) Compatible for BMW 3 2-door Convertible (E46) 330ci; 325ci;323ci; 320cd, 330cd (04/2000-12/2007) Compatible for BMW 3 2-door Coupe (E46) 320ci; 325ci; 330ci;320cd; 330cd; (02/1999-12/2006) Compatible for BMW 3 Touring 5-door wagon/estate (E46) 316i; 325i; 328i; 330i; 323i; 325i; 318d; 320d; 330d; (10/1999-05/2005) note: not for Xi/xd 4 wheel drive NOTE： shoter swaybar end link required. Specification Top mounts: front & rear OE top mounts required Damping: not available Spring rate Front: 8 kg/mm (478 in/lbs) Spring rate Rear: 10 kg/mm (560 in/lbs) Spring length Front: 170mm Spring length Rear: 190mm Adjustable

Height: lowering 35mm-75mm Coilover overall length Front: 365mm-525mm Coilover overall length Rear: 455mm-655mm Shock type: Twin tube
Colour: gold Drop links: Shortened drop links are required Package includedsprings & shocks for front & rear, no top mounts included a pair wrench for height adjustment Dimensionweight: 21660g
Size: 71*51*21 cm Feature 1. Twin-Tube structure allows sufficient stroke within the shock absorber. 2. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus, the special surface treatment improves the durability & performance. 3. Height Adjustment tools included. 4. Steel shock bodies are electroplated with Zinc for Anti-corrosion. Warranty: one year warranty for any manufacturing defect




...

Introduction Ma Xpeeding Rods-S1 series is ideal for those who want to change the old worn-out strut but improve handling at same time. It features with height adjustable & maintain the OE ride quality to the greatest extent. Application Compatible for BMW 3 (E46) 4-door sedan 330i; 325i; 328i; 318d; 320d; 320i, 325i ;330d (02/1998-04/2005) Compatible for BMW 3 2-door Convertible (E46) 330ci; 325ci;323ci; 320cd, 330cd (04/2000-12/2007) Compatible for BMW 3 2-door Coupe (E46) 320ci; 325ci; 330ci;320cd; 330cd; (02/1999-12/2006) Compatible for BMW 3 Touring 5-door wagon/estate (E46) 316i; 325i; 328i; 330i; 323i; 325i; 318d; 320d; 330d; (10/1999-05/2005) Note: not for Xi/xd 4 wheel drive, not for M3 model either NOTE： shoter swaybar end link required. Specification Top mounts: front & rear OE top mounts required Damping: not available Spring rate Front: 8 kg/mm (478 in/lbs) Spring rate Rear: 10 kg/mm (560 in/lbs) Spring length Front: 170mm Spring length Rear: 190mm Adjustable

Height: lowering...

...

Introduction Ma Xpeeding Rods-S1 series is ideal for those who want to change the old worn-out strut but improve handling at same time. It features with height adjustable & maintain the OE ride quality to the greatest extent. Application Compatible for BMW 3 (E46) 4-door sedan 330i; 325i; 328i; 318d; 320d; 320i, 325i ;330d (02/1998-04/2005) Compatible for BMW 3 2-door Convertible (E46) 330ci; 325ci;323ci; 320cd, 330cd (04/2000-12/2007) Compatible for BMW 3 2-door Coupe (E46) 320ci; 325ci; 330ci;320cd; 330cd; (02/1999-12/2006) Compatible for BMW 3 Touring 5-door wagon/estate (E46) 316i; 325i; 328i; 330i; 323i; 325i; 318d; 320d; 330d; (10/1999-05/2005) Note: not for Xi/xd 4 wheel drive, not for M3 model either NOTE： shoter swaybar end link required. Specification Top mounts: front & rear OE top mounts required Damping: not available Spring rate Front: 8 kg/mm (478 in/lbs) Spring rate Rear: 10 kg/mm (560 in/lbs) Spring length Front: 170mm Spring length Rear: 190mm Adjustable

Height: lowering...

...