Features High Rigidity 55 Cr Si Steel Cold-bent Coil Springs Full Length Adjustable
- Raise & Lower Ride Height Through Lower
...

Introduction MXR-B2 coil-overs are designed as entry-level for street use. It features height adjustable & adjustable camber plates (applicable for some vehicles), which offer you a lowered stance, & enhanced performance for your daily use vehicle. Application Compatible for Chrysler Neon 2000-2002compatible for Dodge Neon 2000-2005compatible for Dodge Neon compatible for SRT-4 2003-2005compatible for Dodge SX 2.0 2003-2005compatible for Plymouth Neon 2000-2001 Specification Front top mount: Pillow ball with camber plate Rear top mount: Pillow ball Damping adjustable: Not available Camber adjustable: Available Height adjustable: Yes, lowering 25-75mm depending on the vehicle models Spring rate Front: 8 kg/mm (448 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in) Front spring inner diameter: 70.5 mm Rear spring inner diameter: 70.5 mm Spring length Front: 180 mm Spring length Rear: 230 mm Spring Preload advised: 7-10 mm
Colour: Red body with black spring Package included Package included：2x Front coil-overs...
...

Introduction MXR-B2 coil-overs are designed as entry-level for street use. It features height adjustable & adjustable camber plates (applicable for some vehicles), which offer you a lowered stance, & enhanced performance for your daily use vehicle. Application Compatible for BMW 3 (E46) 4-door sedan 318i; 330i; 325i; 328i; 318d; 320d; 320i, 325i ;330d (02/1998-04/2005) Compatible for BMW 3 2-door Convertible (E46) 318i; 330ci; 325ci;323ci; 320cd, 330cd (04/2000-12/2007) Compatible for BMW 3 2-door Coupe (E46) 318i; 320ci; 325ci; 330ci;320cd; 330cd; (02/1999-12/2006) Compatible for BMW 3 Touring 5-door wagon/estate (E46) 316i; 318i; 325i; 328i; 330i; 323i; 325i; 318d; 320d; 330d; (10/1999-05/2005) Note: not for Xi/xd 4 wheel drive, not for M3 model either Specification Front top mount: Pillow ball with camberplate Rear top mount: OE top mount required Damping adjustable: Not available Height adjustable: Yes, lowering 25-75mm depending on the vehicle models Camber adjustable: Available Spring rate Fron... ...

Features of Coilovers Kit: Ride Height Adjustable
- Drops From 1 to 3 Inch From Factory Ride Height Twin-Tube System for Comfortable
...

Introduction MXR-B2 coil-overs are designed as entry-level for street use. It features height adjustable & adjustable camber plates (applicable for some vehicles), which offer you a lowered stance, & enhanced performance for your daily use vehicle. Application For Impreza WRX sedan/hatchback 2008-2014 For Impreza WRX Limitedsedan/hatchback 2008-2014 For Impreza WRX Premiumsedan/hatchback 2008-2014 Specification Front top mounts: pillow ball with camber plate Rear top mounts: pillow ball Damping adjustable: Not available Camber adjustable: Available Height adjustable: Yes, lowering 25-75mm depending on the vehicle models Spring rate Front: 8 kg/mm (448lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Spring length Front: 230mm Spring length Rear: 180mm Coilover overall length Front: 450mm-520mm Coilover overall length Rear: 460mm-500mm Spring Preload advised: 7-10 mm
Colour: Golden body with black spring Package included Package included： 2x Front coil-overs 2x Rear coil-overs 2x C spanners Dim...
...

Maxpeedingrods street coilovers are designed & developed for all motoring enthusiasts that want excellent handling without sacrificing comfort. This suspension system is ideal for daily driving & occasional, light track use. High quality components are adopted to ensure product durability & stability. Each application is fully test fitted & completely road tested to guarantee all our customers perfect performance & comfort expectations. Features 100% Brand New, Never Used or Installed Twin-Cylinder Design
- Allows Sufficient Stroke Within The Shock Absorber. Full Length Adjustment
- Lowers The Car Without Ruining Spring Tension Independent Spring Tension
- Custom Stiffness Without Change Ride Height Aluminum Anodized top hat& collars Aluminum Pillow Ball Upper Mount, Brackets Aluminum Front & Rear Bottom Mounts Fully Anodized Rust Resistant Sleeves. Application Compatible for Acura RSX & Type-S 2002-2006 Compatible for Honda Integra DC5 2001-2006...


...

Application Compatible for Ford Mustang 2005-2014 Specification
Material: steel Surface finish:： Powder coated eye-to-eye
...

Introduction Brand new in original packaging. Exactly the same as shown in the picture! Package will come in 1 pair of front adjustable lower ball joints 6 pieces of rear adjustable camber arm kit. The camber kit allows for precise changes when fine tuning suspension alignment angles necessary when racing or drifting. Front Ball Joints Adjustment: -max to +1.5 Degrees. Rear Camber Adjustment: -3.0 to +3.0 Degrees. Rear Toe Adjustment: -1.0 to +1.0 Degree. Eliminates tire wear while improving stability. Professional installation highly recommend. Fitment: 08-13 Honda Accord models only. 09-13 Acura TL models only. 09-13 Acura TSX models only. Application: Compatible for Honda Accord Models 2008-2013 Only Compatible for Acura TL Models 2009-2013 Only Compatible for Acura TSX Models 2009-2013 Only Specification Condition: 100% Brand New
Material: Carbon Steel
Colour: Gold Surface Finish: Spraying Plastics Item Weight：8.16kg Package Dimension: 71*13*12cm Packag included: Front Ball Joint + Rear Camber Control Arm Toe Kit Feature: * Front adjustable lower ball joints, Rear adjustable camber arm kit * Strong, lightweight construction
- made from high quality carbon steel! * Provides maximum of +/-3.0 degrees camber +/-1.0 degree toe adjustment of rear wheels. * Improves Rear Suspension, Handling, Predictable Response & even Prevents Premature Tire Wearing Note: * Instruction is not included. Professional installation is highly recommended. * Will not work with vehicles equipped with drum brakes. Some modifications may be required! Works only with disc brake applications only, no drum brakes.


...

Application For Truck, Trailer Specification Condition: New 20, 000 Pound Rating Self-Centering Locking Plate 2-5/16" Ball Pocket Coupler can be pad locked Package included 1 x Gooseneck Adapter (Showing as the picture) Feature-Fully tested under extreme condition for stable performance & long time use. -Attaches to most standard king-pin boxes. -High quality Metal & constructed for Anti-rust & Anti-corrosion. Note* No Instruction Included. ...

Application for Camper/RV/ Trailer's kingpin box Not for trucks with beds shorter than 6 feet or cushioned style king pin boxes Function The adapter is to convert a kingpin of trailer to connect to a Gooseneck Hitch, converts your 5th wheel into a gooseneck The sliding collar is allowed to be adjusted to any height between 12" & 16". Specification Condition: New
Colour: Black Type: Adapter
Material: Steel（QT450-10） Towing capacity (GTW): 20, 000 lbs Pin weight capacity: 4, 000 lbs Length:12 to 16 inches Placement on Vehicle: Rear Package size (cm): 33*33*60 Package weight (kg): 28 Package
Includes:: 1 x Gooseneck Adapter Coupler locks with padlock (Showing as the picture) Features Cushioned 360°, plus up & down Durable steel construction Reduces bounce & vibration (Interior polyurethane cushions act as shock) Minimal wear & tear on both trailer & vehicle Adjustable heights for multiple applications Installation There is a hole in the base where you can put a padlock No drill...


...