Introduction MXR-B2 coil-overs are designed as entry-level for street use. It features height adjustable & adjustable camber plates (applicable for some vehicles), which offer you a lowered stance, & enhanced performance for your daily use vehicle. Application Compatible for TOYOTA COROLLA (E140) AZE141L XRS 2009-2010 compatible for TOYOTA COROLLA (E140/E160) ZRE142L LE 2009-2013 compatible for TOYOTA COROLLA (E150/E170) ZRE172L all 2014-2019 compatible for TOYOTA MATRIX (E140)LE 2009-2014 Specification Front top mount: Pillow ball with camber plate Rear top mount: Standard rubber Damping adjustable: Not available Height adjustable: Yes, lowering 25-75mm depending on the vehicle models Camber adjustable: Available Spring rate Front: 7 kg/mm (392 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in) Front spring inner diameter: 70.5mm Rear spring inner diameter: 70.5mm Spring length Front: 200 mm Spring length Rear: 160 mm Spring Preload advised: 7-10 mm
Colour: Golden body with black spring Package...
...

Maxpeedingrods street coilovers are designed & developed for all motoring enthusiasts that want excellent handling without sacrificing comfort. This suspension system is ideal for daily driving & occasional, light track use. High quality components are adopted to ensure product durability & stability. Each application is fully test fitted & completely road tested to guarantee all our customers perfect performance & comfort expectations. Features 100% Brand New, Never Used or Installed Twin-Cylinder Design
- Allows Sufficient Stroke Within The Shock Absorber. Full Length Adjustment
- Lowers The Car Without Ruining Spring Tension Independent Spring Tension
- Custom Stiffness Without Change Ride Height Aluminum Anodized top hat& collars Aluminum Pillow Ball Upper Mount, Brackets Aluminum Front & Rear Bottom Mounts Fully Anodized Rust Resistant Sleeves. Application Compatible for Acura RSX & Type-S 2002-2006 Compatible for Honda Integra DC5 2001-2006...


...

Application Compatible for Ford Mustang 2005-2014 Specification
Material: steel Surface finish:： Powder coated eye-to-eye
...

Introduction Brand new in original packaging. Exactly the same as shown in the picture! Package will come in 1 pair of front adjustable lower ball joints 6 pieces of rear adjustable camber arm kit. The camber kit allows for precise changes when fine tuning suspension alignment angles necessary when racing or drifting. Front Ball Joints Adjustment: -max to +1.5 Degrees. Rear Camber Adjustment: -3.0 to +3.0 Degrees. Rear Toe Adjustment: -1.0 to +1.0 Degree. Eliminates tire wear while improving stability. Professional installation highly recommend. Fitment: 08-13 Honda Accord models only. 09-13 Acura TL models only. 09-13 Acura TSX models only. Application: Compatible for Honda Accord Models 2008-2013 Only Compatible for Acura TL Models 2009-2013 Only Compatible for Acura TSX Models 2009-2013 Only Specification Condition: 100% Brand New
Material: Carbon Steel
Colour: Gold Surface Finish: Spraying Plastics Item Weight：8.16kg Package Dimension: 71*13*12cm Packag included: Front Ball Joint + Rear Camber Control Arm Toe Kit Feature: * Front adjustable lower ball joints, Rear adjustable camber arm kit * Strong, lightweight construction
- made from high quality carbon steel! * Provides maximum of +/-3.0 degrees camber +/-1.0 degree toe adjustment of rear wheels. * Improves Rear Suspension, Handling, Predictable Response & even Prevents Premature Tire Wearing Note: * Instruction is not included. Professional installation is highly recommended. * Will not work with vehicles equipped with drum brakes. Some modifications may be required! Works only with disc brake applications only, no drum brakes.


...

Application For Truck, Trailer Specification Condition: New 20, 000 Pound Rating Self-Centering Locking Plate 2-5/16" Ball Pocket Coupler can be pad locked Package included 1 x Gooseneck Adapter (Showing as the picture) Feature-Fully tested under extreme condition for stable performance & long time use. -Attaches to most standard king-pin boxes. -High quality Metal & constructed for Anti-rust & Anti-corrosion. Note* No Instruction Included. ...

Introductionma Xpeedingrods SP1 lowering Coilover, standard with adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plate（for some vehicles) & decent outlook offers you more ability to tune your suspension on performance & gives your vehicle a more impressive appearance. Besides, all our Coilover are assembled in the dust-free factory, which turns out good quality & long life. Application Compatible for BMW 3 (E46) 4-door sedan 330i; 325i; 328i; 318d; 320d; 320i, 325i ;330d (02/1998-04/2005) Compatible for BMW 3 2-door Convertible (E46) 330ci; 325ci;323ci; 320cd, 330cd (04/2000-12/2007) Compatible for BMW 3 2-door Coupe (E46) 320ci; 325ci; 330ci;320cd; 330cd; (02/1999-12/2006) Compatible for BMW 3 Touring 5-door wagon/estate (E46) 316i; 325i; 328i; 330i; 323i; 325i; 318d; 320d; 330d; (10/1999-05/2005)note: not Compatible for Xi/xd 4 wheel drive Specification Front top mounts: pillow ball top mount with camber plate Rear top mounts: pillow ball top mounts Damping: 24 levels rebound damping adjustable Spring Rate Front: 8kg/mm Spring Rate Rear: 7kg/mm Adjustable

Height: Yes lowering 1" to 3" Shock type: Twin tube Spring Preload: 7-10 mm
Colour: black body with blue spring Package included:complete coilover kit 2 front & 2 reara pair wrench Dimensionweight：25360gsize：63*51*21 cm Feature 1. Lowered height adjustment from 1"
- 3" which allow a lower center of gravity & also add a more aggressive stance 2. Adjustable pre-load spring tension to reduce the shaking motion to a certain extent 3. Adjustable Camber Plate & Pillow ball top mount for sharpening steering response.4. 24 levels of adjustable damper -- This allows you the ability to perfectly dial in your coilovers system. For a nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. For occasional track days, set it to full stiff.5. CNC machined Aluminum top mounts & lockers--
- excellent strength, & save weight 6. Heavy Duty Steel Lower Mounts--- Highly Durable Reliable 7. Upgraded spring --- more than 600, 000 times continuously test to assure its high tensile strength.8. All inserts come with fitted long rubber boots--- To protect the damper better & be durable.9. With a better damping setting, you will get better performance & comfort at the same time.10. Twin-Tube structure ---provides excellent handling control characteristics for most driving conditions 11. Corrosion Finish
- Anodized Aluminum & Powder Coated Carbon Steel Parts 12. Test for the best---All parts were tested on our professional machine before being assembled & tested by our professional racers on road.13. Clean room assembled---maintain a higher level of accuracy & reliability.14. Upgraded damper oil---make damping more stable & smoother in a wide temperature range. Note- Please check our store for other auto parts you may be interested in.- Caution: OE shims need to be installed on the rear eye bolt bushings.- Please feel free to contact us for whatever we can help with.





...

Introduction Ma Xpeeding Rods T6 (also known as SP1) lowering coilover, standard with adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plate（for some vehicles) & decent outlook offers you more ability to tune your suspension on performance & gives your vehicle a more impressive appearance. Besides, all our Coilover are assembled in the dust-free factory, which turns out good quality & long life. Application Compatible for BMW 3 (E46) 4-door sedan 330i; 325i; 328i; 318d; 320d; 320i, 325i ;330d (02/1998-04/2005) Compatible for BMW 3 2-door Convertible (E46) 330ci; 325ci;323ci; 320cd, 330cd (04/2000-12/2007) Compatible for BMW 3 2-door Coupe (E46) 320ci; 325ci; 330ci;320cd; 330cd; (02/1999-12/2006) Compatible for BMW 3 Touring 5-door wagon/estate (E46) 316i; 325i; 328i; 330i; 323i; 325i; 318d; 320d; 330d; (10/1999-05/2005)note: not Compatible for Xi/xd 4 wheel drive Specification Front top mounts: pillow ball top mount with camber plate Rear top mounts: pillow ball top mounts Damping: 24 levels rebound damping adjustable Spring Rate Front: 8kg/mm Spring Rate Rear: 7kg/mm Adjustable

Height: Yes lowering 1" to 3" Shock type: Twin tube Spring Preload: 7-10 mm
Colour: black body with blue spring Package included:complete coilover kit 2 front & 2 reara pair wrench Dimensionweight：25360gsize：63*51*21 cm Feature 1. Lowered height adjustment from 1"
- 3" which allow a lower center of gravity & also add a more aggressive stance 2. Adjustable pre-load spring tension to reduce the shaking motion to a certain extent 3. Adjustable Camber Plate & Pillow ball top mount for sharpening steering response.4. 24 levels of adjustable damper -- This allows you the ability to perfectly dial in your coilovers system. For a nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. For occasional track days, set it to full stiff.5. CNC machined Aluminum top mounts & lockers--
- excellent strength, & save weight 6. Heavy Duty Steel Lower Mounts--- Highly Durable Reliable 7. Upgraded spring --- more than 600, 000 times continuously test to assure its high tensile strength.8. All inserts come with fitted long rubber boots--- To protect the damper better & be durable.9. With a better damping setting, you will get better performance & comfort at the same time.10. Twin-Tube structure ---provides excellent handling control characteristics for most driving conditions 11. Corrosion Finish
- Anodized Aluminum & Powder Coated Carbon Steel Parts 12. Test for the best---All parts were tested on our professional machine before being assembled & tested by our professional racers on road.13. Clean room assembled---maintain a higher level of accuracy & reliability.14. Upgraded damper oil---make damping more stable & smoother in a wide temperature range. Note- Please check our store for other auto parts you may be interested in.- Caution: OE shims need to be installed on the rear eye bolt bushings.- Please feel free to contact us for whatever we can help with. Warranty: one year warranty for any manufacturing defect





...

Introduction Ma Xpeeding Rods T6 lowering coilover, standard with adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plate（for some vehicles) & decent outlook, offers you more ability to tune your suspension on performance & gives your vehicle more impressive appearance. Besides, all our coilover are assembled in dust-free factory, which turns out good quality & long life. Application Compatible For BMW 3 (E46) 4-door sedan 318i; 330i; 325i; 328i; 318d; 320d; 320i, 325i ;330d (02/1998-04/2005) Compatible For BMW 3 2-door Convertible (E46) 318i; 330ci; 325ci;323ci; 320cd, 330cd (04/2000-12/2007) Compatible For BMW 3 2-door Coupe (E46) 318i; 320ci; 325ci; 330ci;320cd; 330cd; (02/1999-12/2006) Compatible For BMW 3 Touring 5-door wagon/estate (E46) 316i; 318i; 325i; 328i; 330i; 323i; 325i; 318d; 320d; 330d; (10/1999-05/2005) Note: not for Xi/xd 4 wheel drive, not for M3 model either

Specification...

...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket adjustable coilovers suspension kit compatible for Toyota Corolla series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Toyota Corolla E90 E100 E110 AE92 AE101 AE111 1988-1999 Specification Quantity: 4PCS of Coilovers (2 piece front + 2 pieces rear) Adjustable damper: 24 ways adjustable damper force Adjustable camber plate: Yes（front only） Adjustable

Height: Yes (Front 306-396mm; Rear 341-481mm) Spring rate front: 8 kg/mm (448 lbs/in) Spring rate rear: 7 kg/mm (392 lbs/in) Shock type: Twin tube Spring preload: 7-10 mm
Colour: Red Warranty: one year warranty for any manufacturing defect Daily driver, occasional autocross day or occasional track days，equally at home on street & track. For those seeking a lowered stance as well as enhanced handling & response at a high value. Feature- Able to lower ride height by 1''-3''; allows user to have a more aggressive stance.- Coilovers are 24-way adjustable. Rebound & Dampening adjustment which allows the user the ability to dial in your coilovers to any driving needs. The user can enjoy a comfortable riding experience in all road conditions.- Pillow ball top mount --- this design helps combat noise while tuning. It also improves the steering feel & response.- Twin-Tube Shock design is used for low internal frictional resistance in order to increase efficiency & keep shock temps low.- Height adjustment does not sacrifice damper stroke length.- These coilovers are able to have their height adjusted without being taken out of the car.- Most components of the suspension parts are made from 6061-T6 aluminum to increase strength & rigidity.- High Tensile strength performance spring---Tested under a 600, 000 time continuous compression test, the spring distortion was less than 0.04%. Plus, the special surface treatment improves the durability & performance.- Adjustment tools included in the kit. Note- No instruction included; Professional installation alignment suggested.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.



...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket adjustable coilovers suspension kit compatible for Toyota Corolla series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Toyota Corolla E90 E100 E110 AE92 AE101 AE111 1988-1999 Notice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Quantity: 4PCS of Coilovers (2 piece front + 2 pieces rear) Adjustable damper: 24 ways adjustable damper force Adjustable camber plate: Yes（front only） Adjustable

Height: Yes (Front 306-396mm; Rear 341-481mm) Spring rate front: 8 kg/mm (448 lbs/in) Spring rate r...


...