Application Compatible for VW GOLF IV (1J1) Compatible for FWD 1998-2007 Compatible for SEAT LEON (1M1) Compatible for FWD 1999-2006 Compatible for VW NEW BEETLE (9C1, 1C1) Compatible for FWD 1998-2010 (will not fit 4-MOTION Compatible for VW Golf MK4 R32 Compatible for Audi quattro models ) Specification Top mounts: Front & rear OE top mounts required Adjustable damper: No Adjustable

Height: Yes Adjustable camber plate: No Spring rate Front: 8kg/mm (448 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in) Front lowering: 30mm Rear lowering: 50mm Shock type: Twin tube
Colour: Blue Quantity: 2 pieces front + 2 pieces rear as shown Warranty: one year warranty for any manufacturing defect Attention: As it is high performance aftermarket coil over, few modification might be required for some vehicles Features- Twin Tube for longer stroke & softer initial response. And will certainly feel much more controlled than OEM.- Independent ride height & spring preload adjustments. Lowers The Car Without Ruining Spring Tension, allows drop without sacrifice comfort by shorten pitch distance.- All inserts come with fitted rubber boots to protect the damper & keep clean.- Anodized adjustable collars & spring seats for easy adjustment & prolonged cycle life.- Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down.- Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance. Notice- No instruction included; Professional installation is highly recommended.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.



...

Application Compatible for VW GOLF IV (1J1) Compatible for FWD 08/1997-12/2007 Compatible for SEAT LEON (1M1) Compatible for FWD 11/1999-06/2006 Compatible for VW NEW BEETLE (9C1, 1C1) Compatible for FWD 01/1998-11/2010 Note: Will not fit 4-MOTION (AWD), not compatible for VW Golf MK4 R32, & not compatible for Audi Quattro (AWD) models. Specification Top mounts: Front & rear OE top mounts required Damping adjustable: Not available Camber adjustable: Not available Height adjustable: Yes, lowering 0-25mm depending on the vehicle models Spring rate Front: 8 kg/mm (448 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in) Spring length Front: 170mm Spring length Rear: 275mm Coilover overall length Front: 370mm-540mm Coilover overall length Rear: 410mm-650mm Shock type: Twin tube Package includedproduct included: springs & shocks for front & rear, no top mounts included Dimension
Size: 71*51*21 cm Weight: 20.46 kg Feature 1.0-25mm (depends on vehicle models) lower height adjustable 2. Dust boot...
...

Application Compatible for VW GOLF IV (1J1) Compatible for FWD 08/1997-12/2007 Compatible for SEAT LEON (1M1) Compatible for FWD 11/1999-06/2006 Compatible for VW NEW BEETLE (9C1, 1C1) Compatible for FWD 01/1998-11/2010 Note: Will not fit 4-MOTION (AWD), not compatible for VW Golf MK4 R32, & not compatible for Audi Quattro (AWD) models. Specification Top mounts: Front & rear OE top mounts required Damping adjustable: Not available Camber adjustable: Not available Height adjustable: Yes, lowering 0-25mm depending on the vehicle models Spring rate Front: 8 kg/mm (448 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in) Spring length Front: 170mm Spring length Rear: 275mm Coilover overall length Front: 370mm-540mm Coilover overall length Rear: 410mm-650mm Shock type: Twin tube Package includedproduct included: springs & shocks for front & rear, no top mounts included Dimension
Size: 71*51*21 cm Weight: 20.46 kg Feature 1.0-25mm (depends on vehicle models) lower height adjustable 2. Dust boot...
...

Introduction This suspension system features full length adjustment to meet every driver's handling desires. Pillow ball mounts & adjustable camber plates are included for front & rear on most kits to increase steering response, while aluminium upper mounts with hardened rubber bushings are used on some applications for noise reduction. This suspension system is ideal for daily driving & occasional track use. Application Compatible for MAZDA MX-5 II (NB) (01/1998-10/2005) Compatible for Mazda Miata MX-5 NA (1.6L, 1.8L) 1989-1997 Compatible for Mazda Miata MX-5 NB (1.6L, 1.8L) 1998- 2005 Compatible for Mazda Miata Base Convertible 2D 1990-1997 Compatible for Mazda Miata Base Convertible 2D 1999-2005 Compatible for Mazda Miata SE Convertible 2D 2000-2003 Compatible for Mazda Miata LE Convertible 2D 1993 Compatible for Mazda Miata M Edition Convertible 2D 1994-1997 Compatible for Mazda Miata STO Convertible 2D 1997 Compatible for Mazda Miata 10th Anniversary Convertible 2D 1999 Compatible... ...

Features High Rigidity 55 Cr Si Steel Cold-bent Coil Springs Full Length Adjustable
- Raise & Lower Ride Height Through Lower
...

Introduction MXR-B2 coil-overs are designed as entry-level for street use. It features height adjustable & adjustable camber plates (applicable for some vehicles), which offer you a lowered stance, & enhanced performance for your daily use vehicle. Application Compatible for BMW 3 (E46) 4-door sedan 318i; 330i; 325i; 328i; 318d; 320d; 320i, 325i ;330d (02/1998-04/2005) Compatible for BMW 3 2-door Convertible (E46) 318i; 330ci; 325ci;323ci; 320cd, 330cd (04/2000-12/2007) Compatible for BMW 3 2-door Coupe (E46) 318i; 320ci; 325ci; 330ci;320cd; 330cd; (02/1999-12/2006) Compatible for BMW 3 Touring 5-door wagon/estate (E46) 316i; 318i; 325i; 328i; 330i; 323i; 325i; 318d; 320d; 330d; (10/1999-05/2005) Note: not for Xi/xd 4 wheel drive, not for M3 model either Specification Front top mount: Pillow ball with camberplate Rear top mount: OE top mount required Damping adjustable: Not available Height adjustable: Yes, lowering 25-75mm depending on the vehicle models Camber adjustable: Available Spring rate Fron... ...

Features of Coilovers Kit: Ride Height Adjustable
- Drops From 1 to 3 Inch From Factory Ride Height Twin-Tube System for Comfortable
...

Introduction MXR-B2 coil-overs are designed as entry-level for street use. It features height adjustable & adjustable camber plates (applicable for some vehicles), which offer you a lowered stance, & enhanced performance for your daily use vehicle. Application For Impreza WRX sedan/hatchback 2008-2014 For Impreza WRX Limitedsedan/hatchback 2008-2014 For Impreza WRX Premiumsedan/hatchback 2008-2014 Specification Front top mounts: pillow ball with camber plate Rear top mounts: pillow ball Damping adjustable: Not available Camber adjustable: Available Height adjustable: Yes, lowering 25-75mm depending on the vehicle models Spring rate Front: 8 kg/mm (448lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Spring length Front: 230mm Spring length Rear: 180mm Coilover overall length Front: 450mm-520mm Coilover overall length Rear: 460mm-500mm Spring Preload advised: 7-10 mm
Colour: Golden body with black spring Package included Package included： 2x Front coil-overs 2x Rear coil-overs 2x C spanners Dim...
...

Introduction MXR-B2 coil-overs are designed as entry-level for street use. It features height adjustable & adjustable camber plates (applicable for some vehicles), which offer you a lowered stance, & enhanced performance for your daily use vehicle. Application Compatible for TOYOTA COROLLA (E140) AZE141L XRS 2009-2010 compatible for TOYOTA COROLLA (E140/E160) ZRE142L LE 2009-2013 compatible for TOYOTA COROLLA (E150/E170) ZRE172L all 2014-2019 compatible for TOYOTA MATRIX (E140)LE 2009-2014 Specification Front top mount: Pillow ball with camber plate Rear top mount: Standard rubber Damping adjustable: Not available Height adjustable: Yes, lowering 25-75mm depending on the vehicle models Camber adjustable: Available Spring rate Front: 7 kg/mm (392 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in) Front spring inner diameter: 70.5mm Rear spring inner diameter: 70.5mm Spring length Front: 200 mm Spring length Rear: 160 mm Spring Preload advised: 7-10 mm
Colour: Golden body with black spring Package...
...

Maxpeedingrods street coilovers are designed & developed for all motoring enthusiasts that want excellent handling without sacrificing comfort. This suspension system is ideal for daily driving & occasional, light track use. High quality components are adopted to ensure product durability & stability. Each application is fully test fitted & completely road tested to guarantee all our customers perfect performance & comfort expectations. Features 100% Brand New, Never Used or Installed Twin-Cylinder Design
- Allows Sufficient Stroke Within The Shock Absorber. Full Length Adjustment
- Lowers The Car Without Ruining Spring Tension Independent Spring Tension
- Custom Stiffness Without Change Ride Height Aluminum Anodized top hat& collars Aluminum Pillow Ball Upper Mount, Brackets Aluminum Front & Rear Bottom Mounts Fully Anodized Rust Resistant Sleeves. Application Compatible for Acura RSX & Type-S 2002-2006 Compatible for Honda Integra DC5 2001-2006...


...