Introduction MXR-B2 series (also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible for HONDA CIVIC 2012-2015 (FG3) USA 2 door coupe EXCL. SI/EX/EX-Lcompatible for HONDA CIVIC 2012-2015 USA （FB2）4 door sedan EXCL. SIcompatible for ACURA ILX 2013-2015 USASpecification Top mounts: Front pillow ball top mount Damping: Not available Shock type: Twin tube Adjustable camber plate: Front only Spring preload: 7-10 mm Spring rate Front: 7 kg/mm (392 in/lbs) Spring rate Rear: 7 kg/mm (392 in/lbs) Spring length Front: 200mm Spring length Rear: 160mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 450mm-570mm Coilover overall length Rear: 535mm-580mm
Colour: Golden Package includedproduct included: complete coilovers 2 pieces front + 2 pieces rear, 2 x Spanners, 1 Pair Sway bar as shown in the picture Dimension
Size: 63*51*21 cm Weight: 25.28kg Feature Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. Twin-Tube structure allows sufficient stroke within the shock absorber. Pillow ball top mount
- It improves the steering feel & response. Camber plate top mounts help to eliminate the need for a separate camber kit. Separate height adjustment does not affect damper stroke. Height can be adjusted with coilovers installed on the vehicle. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. Height Adjustment tools included. Full rebuildable. Warranty: one year warranty for any manufacturing defect






...

Application Compatible for Kia Optima 2011 2012 2013 2014 2015 Note: New sway bar link is required for SX trim

Specification-

...

Introduction MXR-B3 series (also called MXR-SLC) based on MXR-B2 series (also called MXR-SNA) coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for SCION TC 1st Gen 2005-2010 USA ANT10L Specification Top mounts: front
- pillow ball top mount with camber plate Rear
- standard rubber top mount Damping: 24 levels rebound damping adjustable Spring rate: front 10 Kg/mm rear 6 Kg/mm Shock type: Twin tube
Colour: gold Package includedcomplete coilovers 2 front & 2 rear a pair wrench for height adjustment Dimensionweight: 28720g

Size: 63*51*21 cm Feature 1. Twin-Tube structure allows sufficient stroke within the shock absorber. 2. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus, the special surface treatment improves the durability & performance. 3. Height Adjustment tools included. 4. Pillow ball top mount
- It improves the steering feel & response. 5. Most pieces in our coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 6. Separate height adjustment does not affect damper stroke. 7. Full rebuildable. 8. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance 9. Camber plate top mounts help to eliminate the need for a separate camber kit. 10. A 24 rebound damping adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Warranty: one year warranty for any manufacturing defect







...

Introduction MXR-B2 series (also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application Compatible for Mitsubishi Eclipse IV 2006–2012 (DK2A/DK4A) Compatible for Mitsubishi Galant (DJ) 2004-2012 Specification Top mounts： front camber plate rear rubber top mount Damping: not available Spring rate: front 7 kg/mm (392 lbs/in) rear 6 kg/mm (336 lbs/in) Adjustable

Height: Yes lowering 1" to 3" shock type: Twin tube spring Preload: 7-10 mm
Colour: gold body with black spring Package included Package included: complete coilover assemblies 2 front & 2 rear a pair of wrench for height adjustment Dimension Package dimension: 63*51*20 Weight: 23900g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2. Camber plate top mounts help to eliminate the need for a separate camber kit. 3. Twin-Tube structure allows sufficient stroke within the shock absorber. 4. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. 5. Separate height adjustment does not affect damper stroke & height can be adjusted with coilovers installed on the vehicle. 6. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 7. Most pieces in our coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 8. Steel shock bodies with special surface treatment to improve the durability. 9. Full rebuildable Warranty: one year warranty for any manufacturing defect




...

Description This set of professional tool is a specialised sliding hammer for removal of stuck & seized common rail injectors without dismantling the cylinder head for all injection nozzle cars. The robust construction enables rapid withdrawal, even the most severely seized injector will come out with little fuss. The kit comes with adapters, 3.9kg weight, handle & injector extractors. Ideal for the professional mechanic or enthusiastic DIY'er. Made by professionals for professionals. Feature* Various adaptors make the set suitable for most diesel injectors* For removal of diesel injectors quickily & great for pulling jobs, against the bearing for pulling out evenly without damage the parts* Packed in box, easy to carry. Package including（1） 3 different slide hammers 1.6 kg, 160 mm long 2.7 kg, 460 mm long 5.1 kg, 600 mm long（2） 2 pulling claws with fork opening 13.7 x 18 mm, 105 mm length 12.7 x 19 mm, 130 mm length（3） 5 slotted 6-pt 1/2" sockets, 100 mm length sizes 25
- 27
- 28
- 29
- 30 mm（4） injector extractor, sleeve design, with shells outer diameter 3.5cm internal diameter 29 mm M17 x 1.0 spindle（5） pulling adapter with external thread M27 x 1.0 (3pcs) & M25 x 1.0（6） pulling adapter with internal thread M27 x 1.0 (3pcs)（7） sliding hammer adapter for inner, outer & claw extractor Notice* Condition: New* Professional installation is highly recommended* Box
Colour: The color of the box is random* Please refer to the actual vehicle information to purchase after checking the accessory size information, This product is only suitable for diesel engines, some accessories may not be perfectly adapted to use Warranty: one year warranty for any manufacturing defect




...

Application Compatible for Honda TRX300 Fourtrax 2x 4 1988-2000 Compatible for Honda TRX300FW Fourtrax 4x 4 1988-2000 Part Number 41300-HM5-A10, 41300-HM5-850

Specification Type: Differential Weight: 11 Pound Material of Shell: Aluminum alloy Material of Internal Gear: Steel (20 Cr Mn Ti) Placement on Vehicle: Rear Warranty: one year Condition: Brand New Features 1. The Rear Differential can adjust the speed difference between front & rear wheels, so that our vehicle curve driving rotation speed to maintain basic consistency. 2. made from high quality material, strong & corrosion resistant to ensure it can work for a long time. 3. Fully tested under extreme condition for heat resistance & long-life use. Package

Includes:: 1x Complete Rear Differential (As the pictures shown) Notes * Even if your car is shown in the compatibility, pls also double check the fitment details & photos before ordering. * No Instruction Included, professional installation is highly recommended.



...

Applicationcompatible for Mitsubishi Eclipse Laser EVO 4G63 Early 1 2 3 4340 Forged Specification Performance Con Rods Type: Forged 4340 aircraft chrome moly quality steel for racing H-beam Conrods Quantity: 4 Pieces a set Bolts: Including Genuine ARP 2000 bolts Note: Extra cost for upgrading to ARP L19 bolts Bolts

Size: ARP 2000 3/8" bolts Tolerance: Balanced to +/- 1 gram in set Piston Bolt Hole: +-4/1000mm Power: 600~800HP Strength of the fastening (PSI): 200, 000
- 230, 000 psi Torque: 48ft ≈ 65 NM Top acceleration: 7000-9000rpm warranty: one year warranty for any manufacturing defect Dimensions Center to center length: 150mm Big end diameter:48mm Small end diameter: 21mm Big end

Width: 28.3mm Small end

Width: 28.3mm Feature-Forged SAE 4340 Chrome Moly Steel for the highest strength & durability, dedicated for Racing-Designed & processed by CNC machine.-All big & small ends are finished with SUNNEN honing machine-Precision alignment sleeves positively locate the rod cap, maintaining big end bore size & eliminating cap walk-100% X-rayed, sonic tested & magnafluxed-Multi-stage heat treated-Shot peened to relieve stress-Come with the bronzed bushing suitable for the floating piston pin Note Professional installation is highly recommended (No Instruction Included) Custom Service: If there's no conrods you need on our site, we would be happy to help determine your requirements & develop a solution with you to satisfy your needs. Learn more about CUSTOM SERVICE






...

Application Compatible for Alfa Romeo 75 Milano GTV6 V6 2.5/3.0 L Specification TÜV Certification Con Rods Type: Forged 4340 aircraft chrome moly quality steel for racing H-beam Conrods Quantity: 6 Pieces as showing in picture Bolts: Including ARP 2000 bolts Note: Extra cost for upgrading to ARP L19 bolts Bolts

Size: Genuine ARP 2000 3/8" bolts Tolerance: Balanced to +/- 1 gram in set Piston Bolt Hole: +-4/1000mm Power: 600hp ~ 800PS per set Strength of the fastening (PSI): 220, 000/230, 000 PSI Torque: 48ft ≈ 65 NM Top acceleration: 9000rpm warranty: one year warranty for any manufacturing defect Dimensions Center to center length: 131.1mm Big end diameter: 55.6mm Small end diameter: 22mm Big end

Width: xx Small end

Width: xx Note： This is not offset design Feature- Forged SAE 4340 Chrome Moly Steel for the highest strength & durability, dedicated for Racing- Designed & processed by CNC machine.- All big & small ends are finished with SUNNEN honing machine- Precision alignment sleeves positively locate the rod cap, maintaining big end bore size & eliminating cap walk- 100% X-rayed, sonic tested & magnafluxed- Multi-stage heat treated- Shot peened to relieve stress- Come with the bronzed bushing suitable for the floating piston pin Notice Professional installation is highly recommended (No Instruction Included) Custom Service: If there's no conrods you need on our site, we would be happy to help determine your requirements & develop a solution with you to satisfy your needs. Learn more about CUSTOM SERVICE





...

Application Compatible for Austin mini 1275cc A plus series Fitment:1964–1971 compatible for Austin/ Compatible for Morris Compatible for Mini Cooper S1965-1974 compatible for Mini Marcos 1966–1970 compatible for Austin-Healey Sprite Mk IV1966–1974 compatible for MG Midget Mk III1967–1968 compatible for MG 1300/ Compatible for Wolseley 13001967–1968 compatible for Riley Kestrel 13001967–1968 for Vanden Plas Princess 13001967–1973 compatible for Morris 13001967–1974 compatible for Austin 13001967 compatible for MG 1275/ Compatible for Riley 12751967 compatible for Wolseley 12751967 for Vanden Plas Princess 12751968–1969 compatible for Riley Kestrel 1300/ Compatible for Riley 13001968–1971 compatible for Austin America (automatic)1968–1973 compatible for Wolseley 1300 (manual)1968–1973 compatible for MG 1300 Mk II1968–1974 for Vanden Plas Princess 1300 (manual)1968 compatible for MG 1300/ Compatible for Riley Kestrel 13001969–1971 compatible for Morris 1300GT1971–1982 compatible for Mini Moke Californian Australian only 1969–1974 compatible for Mini 1275GT1969–1974 compatible for Austin 1300GT1971–1980 compatible for Morris Marina 1971 compatible for Austin Sprite 1973–1980 compatible for Austin Allegro 1974–1980 compatible for Mini 1275GTSpecification Type: Forged 4340 aircraft chrome moly quality steel for racing H-beam Conrods Quantity: 4 Pieces a set Bolts: Including Genuine 5/16" ARP 2000 bolts Note: Extra cost for upgrading to ARP L19 bolts Bolts

Size: 5/16" Tolerance: Balanced to +/- 1 gram in set Piston Bolt Hole: +-4/1000mm Power: 600hp ~ 800PS per set Strength of the fastening (PSI): 220, 000/230, 000 PSI Torque: 48ft ≈ 65 NM Top acceleration: 7000rpm warranty: one year warranty for any manufacturing defect Dimensions Center to center length: 146.05mm Big end diameter: 48.3mm Small end diameter: XXBig end

Width: XXSmall end

Width: XXFeatures-Forged SAE 4340 Chrome Moly Steel for the highest strength & durability, dedicated for Racing-Designed & processed by CNC machine.-All big & small ends are finished with SUNNEN honing machine-Precision alignment sleeves positively locate the rod cap, maintaining big end bore size & eliminating cap walk-100% X-rayed, sonic tested & magnafluxed-Multi-stage heat treated-Shot peened to relieve stress-Come with the bronzed bushing suitable for the floating piston pin Notice Professional installation is highly recommended (No Instruction Included) Custom Service: If there's no conrods you need on our site, we would be happy to help determine your requirements & develop a solution with you to satisfy your needs.





...

Introduction Ma Xpeeding Rods H-beam connecting rods are designed for demanding racing applications to increase horsepower & efficiency. The strength is suitable for high-horsepower applications while keeping the weight light. Professional processing makes it have super high wear resistance & excellent durability. Application Compatible for Ford Eco Boost 2.3L engine； Compatible for Ford Explorer 2016–2019 Compatible for Ford Focus RS 2016–2018 Compatible for Ford Mustang Ecoboost 2015 Compatible for Lincoln MKC 2015–2019 Specification* Type: Forged 4340 aircraft chrome moly quality steel for racing*H-beam Conrods Quantity: 4 Pieces as shown in picture* Pin Type: Floating Pin Piston， Small end without taper.* Bolts: Including Genuine ARP 2000 3/8" bolts (Note: Extra cost for upgrading to ARP L19 bolts)* The connecting rods all include ARP 2000 bolts, which are rated at 220, 000 psi, & the optional ARP L19 material at 260, 000 psi is available as an upgraded product.* Advertised Horsepower Rating:200HP/piece* Top acceleration: 9000rpm*package size：28CM*21CM*10CMDimension Center to center length: 149.3mm/5.878" Big end diameter: 55mm/2.165" Small end diameter: 22.5mm/0.886" Big end

Width: 21.82mm/0.859" Small end

Width: 21.82mm/0.859" Feature 1. TüV Certification Con Rods；2.

Material: Forged SAE 4340 Chrome Moly Steel for the highest strength & durability, dedicated for Racing；3. Genuine ARP 2000 bolts, Optional ARP L19 fasteners available as an upgrade；4. H-Beam design reduces weight without compromising strength；5. Heat-treating Shot-peened for remained consistent & strong. Shot-peened finish to remove the potential for stress risers；6.100% CNC machined, Precision rod cap alignment dowels；7. Bores finished to +/-. 01 mm；8. Balanced to within +/- 1 g per rod；9. Each rod is magnetic particle tested to ensure free of flaws；10.100% X-rayed, sonic tested；11. Custom Service. Note* Professional installation is highly recommended ；* Custom Service: If there are no conrods you need on our site, we would be happy to help determine your requirements & develop a solution with you to satisfy your needs. Warranty: one year warranty for any manufacturing defect





...