Introduction MXR-B2 series (also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible for Mitsubishi Eclipse (3rd-Gen) D53A/D52A 2000-2005 Specification Top mounts: pillow ball top mount with camber plate front, standard rubber top mount rear. Damping: No adjustable damper force Front Spring Rate: 10 kg/mm (556 lbs/in) Rear Spring Rate:7 kg/mm (392 lbs/in) Spring length Front: 200mm Spring length Rear: 200mm Coilover overall length Front: 430mm-570mm Coilover overall length Rear: 480mm-540mm Adjustable

Height: Yes lowering 1" to 3" Shock type: Twin tube Spring Preload: 7-10 mm
Colour: gold Package includedproduct included: complete coilovers 2 front & 2 rear, a pair wrench for height adjustment. Dimension Gross weight: 25.28kg Package

Size: 63*51*21cm Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2. Camber plate top mounts help to eliminate the need for a separate camber kit.（ Only Front) 3. Pillow ball top mount
- It improves the steering feel & response.（ Only Front) 4. Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts. (Only Rear) 5. Twin-Tube structure allows sufficient stroke within the shock absorber. 6. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. 7. Separate height adjustment does not affect damper stroke. 8. Height can be adjusted with coilovers installed on the vehicle. 9. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 10. Height Adjustment tools included. 11. Full rebuildable. Warranty: one year warranty for any manufacturing defect







...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket adjustable coilovers suspension kit compatible for Mitsubishi series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Mitsubishi Galant/ Legnum VR4 EC5A/ EC5W 1999-2003 Fits Models with 2.5L 6A13TT V6 Engines ONLYSpecification Quantity: 2 pieces front + 2 pieces rear as shown in the picture Front Spring Rate: 7 kg/mm (392 in/lbs) Rear Spring Rate: 6 kg/mm (336 in/lbs) Damper: 24 ways adjustable damper Adjustable

Height: YES Adjustable Camber Plate: No
Colour: golden Warranty: one year warranty for any manufacturing defect Feature- Adjustable ride height
- Adjustable pre-load spring tension
- 24 levels of adjustable damper -- This allows you the ability to perfectly dial in your coilovers system. For a nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks.
- For occasional track days, set it to full stiff.
- Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response
- Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down.
- Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.
- All inserts come with fitted rubber boots to protect the damper & keep clean.
- Improve your handling performance without sacrifice comfortable ride.
- A fast & affordable way to easily upgrade your car's appearance.
- Easy installation with right tools.
- Ideal for any track, drift & fast road & can also be used for daily Notice- No instruction included; Professional installation is highly recommended.
- Please check our store for other auto parts you may be interested in.
- Please feel free to contact us for whatever we can help.

















...

Application Compatible for Subaru Forester 2009-2013 3rd. Generation Specification Quantity: 2 piece front + 2 pieces rear Spring rate Front: 8 kg/mm (448 lbs/in) Spring rate Rear: 10kg/mm (560 lbs/in) Damper: 24 ways adjustable damper Adjustable

Height: Yes Adjustable camber plate: Yes
Colour: Golden Warranty: one year warranty for any manufacturing defect Feature- Adjustable ride height
- Adjustable pre-load spring tension
- 24 levels of adjustable damper -- This allows you the ability to perfectly dial in your coilovers system. For a nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. For occasional track days, set it to full stiff.
- Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response
- Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down.
- Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.
- Improve your handling performance without sacrifice comfortable ride.
- All inserts come with fitted rubber boots to protect the damper & keep clean.
- A fast & affordable way to easily upgrade your car's appearance.
- Easy installation with right tools.
- Ideal for any track, drift & fast road & can also be used for daily driving. Note No instruction included; Professional installation & alignment suggested. Please check our store for other auto parts you may be interested in. Please feel free to contact us for whatever we can help.













...

Applicationfor 2002-2006 compatible for Acura RSX & Type-S compatible for Honda Integra DC5 2001-2006 Specification Top mounts: Front pillow ball top mount Damping: Not available Shock type: Twin tube Adjustable

Height: Yes lowering 1'' to 3'' Adjustable camber plate: No Spring preload: 7-10 mm Spring rate Front: 8 kg/mm (448 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in)
Colour: Golden Package included Complete coilover assembly kit for front & rear A pair wrench for height adjustment Dimension Package dimension: 63*51*21 cm Weight: 22.38kg Feature Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts. Pillow ball top mount
- It improves the steering feel & response. Twin-Tube structure allows sufficient stroke within the shock absorber. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. Separate height adjustment does not affect damper stroke. Height can be adjusted with coilovers installed on the vehicle. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. Height Adjustment tools included. Full rebuildable. Warranty: one year warranty for any manufacturing defect





...

Introduction MXR-B2 series (also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible for HONDA CIVIC 2012-2015 (FG3) USA 2 door coupe EXCL. SI/EX/EX-Lcompatible for HONDA CIVIC 2012-2015 USA （FB2）4 door sedan EXCL. SIcompatible for ACURA ILX 2013-2015 USASpecification Top mounts: Front pillow ball top mount Damping: Not available Shock type: Twin tube Adjustable camber plate: Front only Spring preload: 7-10 mm Spring rate Front: 7 kg/mm (392 in/lbs) Spring rate Rear: 7 kg/mm (392 in/lbs) Spring length Front: 200mm Spring length Rear: 160mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 450mm-570mm Coilover overall length Rear: 535mm-580mm
Colour: Golden Package includedproduct included: complete coilovers 2 pieces front + 2 pieces rear, 2 x Spanners, 1 Pair Sway bar as shown in the picture Dimension
Size: 63*51*21 cm Weight: 25.28kg Feature Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. Twin-Tube structure allows sufficient stroke within the shock absorber. Pillow ball top mount
- It improves the steering feel & response. Camber plate top mounts help to eliminate the need for a separate camber kit. Separate height adjustment does not affect damper stroke. Height can be adjusted with coilovers installed on the vehicle. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. Height Adjustment tools included. Full rebuildable. Warranty: one year warranty for any manufacturing defect






...

Introduction MXR-B3 series (also called MXR-SLC) based on MXR-B2 series (also called MXR-SNA) coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for SCION TC 1st Gen 2005-2010 USA ANT10L Specification Top mounts: front
- pillow ball top mount with camber plate Rear
- standard rubber top mount Damping: 24 levels rebound damping adjustable Spring rate: front 10 Kg/mm rear 6 Kg/mm Shock type: Twin tube
Colour: gold Package includedcomplete coilovers 2 front & 2 rear a pair wrench for height adjustment Dimensionweight: 28720g

Size: 63*51*21 cm Feature 1. Twin-Tube structure allows sufficient stroke within the shock absorber. 2. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus, the special surface treatment improves the durability & performance. 3. Height Adjustment tools included. 4. Pillow ball top mount
- It improves the steering feel & response. 5. Most pieces in our coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 6. Separate height adjustment does not affect damper stroke. 7. Full rebuildable. 8. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance 9. Camber plate top mounts help to eliminate the need for a separate camber kit. 10. A 24 rebound damping adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Warranty: one year warranty for any manufacturing defect







...

Introduction MXR-B2 series (also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application Compatible for Mitsubishi Eclipse IV 2006–2012 (DK2A/DK4A) Compatible for Mitsubishi Galant (DJ) 2004-2012 Specification Top mounts： front camber plate rear rubber top mount Damping: not available Spring rate: front 7 kg/mm (392 lbs/in) rear 6 kg/mm (336 lbs/in) Adjustable

Height: Yes lowering 1" to 3" shock type: Twin tube spring Preload: 7-10 mm
Colour: gold body with black spring Package included Package included: complete coilover assemblies 2 front & 2 rear a pair of wrench for height adjustment Dimension Package dimension: 63*51*20 Weight: 23900g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2. Camber plate top mounts help to eliminate the need for a separate camber kit. 3. Twin-Tube structure allows sufficient stroke within the shock absorber. 4. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. 5. Separate height adjustment does not affect damper stroke & height can be adjusted with coilovers installed on the vehicle. 6. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 7. Most pieces in our coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 8. Steel shock bodies with special surface treatment to improve the durability. 9. Full rebuildable Warranty: one year warranty for any manufacturing defect




...

Description This set of professional tool is a specialised sliding hammer for removal of stuck & seized common rail injectors without dismantling the cylinder head for all injection nozzle cars. The robust construction enables rapid withdrawal, even the most severely seized injector will come out with little fuss. The kit comes with adapters, 3.9kg weight, handle & injector extractors. Ideal for the professional mechanic or enthusiastic DIY'er. Made by professionals for professionals. Feature* Various adaptors make the set suitable for most diesel injectors* For removal of diesel injectors quickily & great for pulling jobs, against the bearing for pulling out evenly without damage the parts* Packed in box, easy to carry. Package including（1） 3 different slide hammers 1.6 kg, 160 mm long 2.7 kg, 460 mm long 5.1 kg, 600 mm long（2） 2 pulling claws with fork opening 13.7 x 18 mm, 105 mm length 12.7 x 19 mm, 130 mm length（3） 5 slotted 6-pt 1/2" sockets, 100 mm length sizes 25
- 27
- 28
- 29
- 30 mm（4） injector extractor, sleeve design, with shells outer diameter 3.5cm internal diameter 29 mm M17 x 1.0 spindle（5） pulling adapter with external thread M27 x 1.0 (3pcs) & M25 x 1.0（6） pulling adapter with internal thread M27 x 1.0 (3pcs)（7） sliding hammer adapter for inner, outer & claw extractor Notice* Condition: New* Professional installation is highly recommended* Box
Colour: The color of the box is random* Please refer to the actual vehicle information to purchase after checking the accessory size information, This product is only suitable for diesel engines, some accessories may not be perfectly adapted to use Warranty: one year warranty for any manufacturing defect




...

Application Compatible for Kawasaki Mule 2500 2000 Compatible for Kawasaki Mule 2510 2000-2002 Compatible for Kawasaki Mule 2520 2000 Compatible for Kawasaki Mule 3000 2004-2008 Compatible for Kawasaki Mule 3010 2001-2008 Compatible for Kawasaki Mule 3020 2001-2002 Compatible for Kawasaki Mule 4000 2009-2018 Compatible for Kawasaki Mule 4010 2009-2018 Compatible for Kawasaki Mule 4010 Trans 2015-2018 (Will fit both KAF620 Gas & KAF950 Diesel models) * Not intended for use in lifted vehicles Part Number 39158-1119, 39158-1120, 39158-1104, 39158-1105, 39158-1109, 49006-1257

Specification Type: Rear Axle
Colour: Black

Material: 45 Steel Placement on Vehicle: Rear Way of Installation: Direct Installation Condition: 100% Brand New Waranty: one year warranty for any manufacturing defect Features 1. The rear axle is made from 45 steel, the excellent strength & hardness of 45 steel make the rear axle strong & durable. 2. The surface of the rear axle is spray painting, & the surface baking paint protects the metal from oxidation, so it is wear-resistant & durable. 3. It can be installed directly without modification, the installation is simple, saving your time & energy. Package

Includes:: 1 x Rear Axle Drive Shaft (Just as the picture shows) Notice * Please double confim the compatibility as well as the OEM number before purchasing. * Instruction is not included. Professional installation is recommended. * Contact us please for whatever we can help.






...

Application Compatible for Honda TRX300 Fourtrax 2x 4 1988-2000 Compatible for Honda TRX300FW Fourtrax 4x 4 1988-2000 Part Number 41300-HM5-A10, 41300-HM5-850

Specification Type: Differential Weight: 11 Pound Material of Shell: Aluminum alloy Material of Internal Gear: Steel (20 Cr Mn Ti) Placement on Vehicle: Rear Warranty: one year Condition: Brand New Features 1. The Rear Differential can adjust the speed difference between front & rear wheels, so that our vehicle curve driving rotation speed to maintain basic consistency. 2. made from high quality material, strong & corrosion resistant to ensure it can work for a long time. 3. Fully tested under extreme condition for heat resistance & long-life use. Package

Includes:: 1x Complete Rear Differential (As the pictures shown) Notes * Even if your car is shown in the compatibility, pls also double check the fitment details & photos before ordering. * No Instruction Included, professional installation is highly recommended.



...