Introduction MXR-B2 series (also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible for TOYOTA SUPRA 1993.05-2002.07 JPN JZA80 RZ, RZ-S，SZ, SZ-R compatible for TOYOTA SUPRA 1993-1998 USA JZA80L compatible for TOYOTA SOARER 1991.05-2000.03JPN JZZ30 2.5GT-T compatible for LEXUS SC300 1992-2000 USA JZZ30 compatible for LEXUS SC400 1992-2000 USA UZZ30 Specification Top mounts: standard rubber top mounts for front & rear Damping: not available Spring rate: front 10kg/mmrear 7 kg/mm Adjustable

Height: Yes lowering 1" to 3" Shock type: Twin tube Spring preload: 7-10 mm
Colour: gold Package includedcomplete coilovers for 2 front & 2 rear a pair wrench for height adjustment Dimensionweight: 23860g

Size: 63*51*21 cm Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance 2. Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts. 3. Twin-Tube structure allows sufficient stroke within the shock absorber. 4. Separate height adjustment does not affect damper stroke. 5. Height can be adjusted with coilovers installed on the vehicle. 6. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus, the special surface treatment improves the durability & performance. 7. Height Adjustment tools included. 8. Most pieces in our coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 9. Full rebuildable. Warranty: one year warranty for any manufacturing defect






...

Introduction MXR-B2 series (also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application Compatible for TOYOTA　SUPRA　1986.01-1990.08　JPN　MA70　GT TURBO, GT TWIN TURBO S compatible for TOYOTA　SUPRA　1986.01-1993.04　JPN　GA70　G, GT, GT TWIN TURBO compatible for TOYOTA　SUPRA　1987-1992　USA　MA70L compatible for TOYOTA　SUPRA　1990.08-1993.04　JPN JZA70　GT, TWIN TURBO, TWIN TURBO R compatible for TOYOTA　SOARER　1986.01-1991.05　JPN　GZ20　GT TWIN TURBO, TWIN TURBO L, 2.0VX compatible for TOYOTA　SOARER　1986.01-1991.05　JPN　MZ20　GT, GT LIMITEDSpecification Top mounts: rubber front & rear Damping: not available Spring rate: front 14kg/mm (784lbs/in) rear: 12 kg/mm (672 lbs/in) adjustable

Height: Yes lowering 1" to 3" shock type: Twin tube
Colour: gold body with black spring Package includedproduct included: complete coilovers 2 front & 2 rear a pair wrench for height adjustment Dimensionpackage weight: 25820g package dimension: 71*51*21 Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance 2， Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts. 3， Twin-Tube structure allows sufficient stroke within the shock absorber. 4， Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. 5， Separate height adjustment does not affect damper stroke. 6， Height can be adjusted with coilovers installed on the vehicle. 7， High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 8， Most pieces in our coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. Warranty: one year warranty for any manufacturing defect




...

Application Compatible for Toyota Supra JZA70, Mark II, Crown 1JZ-GTE 1JZ-GE 1JZ

Specification- Performance Con Rods-

...

Introduction Looking to boost your car's horsepower? Is your car's original turbocharger not performing well or need replacing? Maxpeedingrods stocks all the best OEM-quality turbochargers & turbo parts to give your car the power, performance, & reliability you deserve. Maxpeedingrods aftermarket replacement turbos provide the perfect solution by delivering a high-quality turbo at a budget-friendly price. Application Compatible for Toyota Supra MK III 3.0L P 7MG-TE 87
- 94 Turbo Part Number & OEM Number 1720142020, 17201-42020 Feature* Turbine housing adopts ductile iron QT450-10 able to withstand temperatures up to 700℃.* Steel Turbine Wheel constructed from K418 alloy to achieve high oxidation resistance & stability under high temperatures up to 900℃.* Cast aluminium blades with good air tightness & corrosion resistance* OEM-quality & size with little modification Specification Cooling Type： Water Cooling Bearing Type: Journal Bearing / Floating Bearing Trust bearings: 270 Degrees Hosepower: Up to 180HPCondition: Brand New Warranty: one year warranty for any manufacturing defect Accessories: You will receive the parts exactly as shown in the picture above. Note* Please check the Turbo Model, Turbo Part Number & OEM Part Number on your original Turbo to make sure this turbo is the correct one for your engine. If you need assistance finding the correct turbo for your car, please feel free to contact us.* Professional installation is highly recommended (No Instructions are Included)
...

Application Compatible for Toyota 4 Runner V6 & 4WD 2003-2019 compatible for Toyota FJ Cruiser V6 & 4WD 2007-2014 compatible for Toyota Tacoma V6 & 4WD 2005-2019

Specification- New.
- 100% Electrically Tested Prior to Leaving the Factory
- Direct replacement
- Built to strict quality control standards
- Package include: 1 x Differential Vacuum Actuator (as the picture show) Interchange Part Number 41400-35030, 4140035030, 41400-35031, 4140035031, 41400-35032, 4140035032, 41400-35033, 4140035033, 41400-35034, 4140035034, Note- Please make sure it will fit your machine before purchasing it.
- Please check pictures for more details.
- If this item can not work properly for you, please contact us at any time.
- We promise we will do our best to serve you. Warranty: one year warranty for any manufacturing defect








...

Application Compatible for Triumph Spitfire 1500, Late 1300 Specification Performance Con Rods Type: Forged 4340 aircraft chrome moly quality steel for racing H-beam Conrods Quantity: 4 Pieces a set Bolts: Including Genuine ARP 2000 5/16" bolts Note: Extra cost for upgrading to ARP L19 bolts Bolts

Size: ARP 2000 5/16" bolts Tolerance: Balanced to +/- 1 gram in set Piston Bolt Hole: +-4/1000mm Power: 600hp ~ 800PS per set Strength of the fastening (PSI): 220, 000/230, 000 PSI Torque: 48ft ≈ 65 NM Top acceleration: 7000rpm warranty: one year warranty for any manufacturing defect Dimensions Center to center length: 146.05mm Big end diameter: 51.34mm Small end diameter: 20.63mm Big end

Width: XXSmall end

Width: XXFeature- Forged SAE 4340 Chrome Moly Steel for the highest strength & durability, dedicated for Racing- Designed & processed by CNC machine.- All big & small ends are finished with SUNNEN honing machine- Precision alignment sleeves positively locate the rod cap, maintaining big end bore size & eliminating cap walk- 100% X-rayed, sonic tested & magnafluxed- Multi-stage heat treated- Shot peened to relieve stress- Come with the bronzed bushing suitable for the floating piston pin Note- Professional installation is highly recommended (No Instruction Included)- Custom Service: If there's no conrods you need on our site, we would be happy to help determine your requirements & develop a solution with you to satisfy your needs.





...

Application Compatible for Triumph TR5 TR250 for GT6 TR6 late model Specification Performance Con Rods Type: Forged 4340 aircraft chrome moly quality steel for racing H-beam Conrods Quantity: 6 Pieces as showing in picture Bolts: Including ARP 2000 bolts Note: Extra cost for upgrading to ARP L19 bolts Bolts

Size: ARP 2000 5/16" bolts Tolerance: Balanced to +/- 1 gram in set Piston Bolt Hole: +-4/1000mm Power: 600hp ~ 800PS per set Strength of the fastening (PSI): 220, 000/230, 000 PSI Torque: 48ft ≈ 65 NM Top acceleration: 7000rpm warranty: one year warranty for any manufacturing defect Dimensions Center to center length: 146.05mm Big end diameter: 51.34mm Small end diameter: 20.63mm Big end

Width: xx Small end

Width: xx Feature- Forged SAE 4340 Chrome Moly Steel for the highest strength & durability, dedicated for Racing
- Designed & processed by CNC machine.
- All big & small ends are finished with SUNNEN honing machine
- Precision alignment sleeves positively locate the rod cap, maintaining big end bore size & eliminating cap walk
- 100% X-rayed, sonic tested & magnafluxed
- Multi-stage heat treated
- Shot peened to relieve stress
- Come with the bronzed bushing suitable for the floating piston pin Note- Professional installation is highly recommended (No Instruction Included)
- Custom Service: If there's no conrods you need on our site, we would be happy to help determine your requirements & develop a solution with you to satisfy your needs.
- Learn more about CUSTOM SERVICE














...

Application Compatible for Triumph TR3 TR4 4340 Forged Specification Performance Con Rods Type: Forged 4340 aircraft chrome moly quality steel for racing H-beam Conrods Quantity: 4 Pieces a set Bolts: Including Genuine ARP 2000 bolts Note: Extra cost for upgrading to ARP L19 bolts Bolts

Size: ARP 2000 3/8" bolts Tolerance: Balanced to +/- 1 gram in set Piston Bolt Hole: +-4/1000mm Power: 600hp ~ 800PS per set Strength of the fastening (PSI): 220, 000/230, 000 PSI Torque: 48ft ≈ 65 NM Top acceleration: 9000rpm warranty: one year warranty for any manufacturing defect Dimensions Center to center length: 158.75mm Big end diameter: 56.72mm Small end diameter: 22mm Big end

Width: XXSmall end

Width: XXFeature-Forged SAE 4340 Chrome Moly Steel for the highest strength & durability, dedicated for Racing-Designed & processed by CNC machine.-All big & small ends are finished with SUNNEN honing machine-Precision alignment sleeves positively locate the rod cap, maintaining big end bore size & eliminating cap walk-125% X-rayed, sonic tested & magnafluxed-Multi-stage heat treated-Shot peened to relieve stress-Come with the bronzed bushing suitable for the floating piston pin Note Professional installation is highly recommended (No Instruction Included) Custom Service: If there's no conrods you need on our site, we would be happy to help determine your requirements & develop a solution with you to satisfy your needs. Learn more about CUSTOM SERVICE





...

Application Compatible for Citroen Jumper 2.2 HDI All BHP Variants 2006-Compatible for Fiat Ducato 2.2 HDI All BHP Variants 2006-Compatible for Ford Transit 2.2 TDCI All BHP Variants 2006-Compatible for Ford Transit 3.2 TDCI All BHP Variants 2008-Compatible for Isuzu Rodeo 2.5 3.0 All BHP Variants Compatible for Isuzu D-Max 2.5 3.0 All BHP Variants 2007-Compatible for Land Rover Defender 90 110 2.4 TDCI All BHP Variants 2006-Compatible for Mazda 3 2.0 All BHP Variants 2005-Compatible for Mazda 5 2.0 All BHP Variants 2005-Compatible for Mazda CX-7 2.2 All BHP Variants 2009-Compatible for Peugeot Boxer 2.2 HDI All BHP Variants 2006-Compatible for Vauxhall Compatible for Opel Corsa 1.7 CDTI All BHP Variants 2006-Compatible for Vauxhall Compatible for Opel Meriva 1.7CDTI All BHP Variants 2006-Compatible for Vauxhall Compatible for Opel Zafira 1.7 CDTI All BHP Variants 2006-Compatible for Ford Transit 2.4 TDCI All BHP Variants 2006-Engine Code: Puma Compatible for Mazda 6 2.0 2005-Engine Code: RF-DI Alternate Part Numbers RF7J13800 / R2AA13800 Compatible for Mitsubishi L200 KA4T (KA, KB)2500 DIESEL 4D56 / 2WD (TRUCK) 12/2005-Compatible for Mitsubishi L200 KB4T (KA, KB)2500 DIESEL 4D56 / 4WD (TRUCK) 12/2005-Compatible for Mitsubishi PAJERO / SHOGUN3.2 DI-D / TD DIESEL 2006-2015 Compatible for Mitsubishi PAJERO V88W (V80, 90)3200 D-TURBO 4M41 / SHORT WAGON (07M-) 12/2006-Compatible for Mitsubishi PAJERO V98W (V80, 90)3200 D-TURBO 4M41 / LONG WAGON (07M-) 12/2006-Compatible for Nissan Pathfinder 2.5 DCI All BHP Variants 2006-Engine Code: YD25 Compatible for Vauxhall Compatible for Opel Astra 1.7 CDTI All BHP Variants 2004-Engine Codes: Z17DTJ, Z17DTR, A17DT, A17DTRReference Oem Number / Part Number 294000-023, 294000-0230, 294000-0231294000-0232, 294000-0233, 294000-0234294000-0235, 294000-0236, 294000-0237294000-0238, 294000-0239, 294000-033294000-0334, 294000-034, 294000-0342294000-0400, 294000-0402, 294000-04047294000-041, 294000-0412, 294000-042294000-0424, 294000-0501, 294000-0502294000-0503, 294000-0532, 294000-0560294000-0581, 294000-062, 294000-0621294000-064, 294000-0640, 294000-0654294000-066, 294000-0662, 294000-0690294000-0750, 294000-0763, 294000-0770294000-0782, 294000-0840, 294000-095294000-1010, 294000-1011, 294000-1012294000-1013, 294000-1014, 294000-1015294000-1016, 294000-1017, 294000-1018294000-1019, 294009-0260, 294009-0360294200-0160, 294200-0360, 294200-05056C1Q9358AA, 6C1Q-9358-AA, 6C1Q9358AB6C1Q-9358-AB, 8-97311373-7, 8-98043735-0A6860EC09A, A6860-EC09A, A6860VM09AA6860-VM09A, DCRS300260, LR009837RFY0-13-V21, RFY0-13-V21A, SM29400902514MSM294009-02514M, V2511000281.093, 9207, 819173, 1514885, 802920797311373, 2940090260, 89731137379665523380, 1460A001, 1460A037, 1460A037T1460A047, 1920.QK, 1920QKSpecification: Condition: New Installation Position: On the Side of the for fuel pump Warranty: 1 Year Item Include:1x Fuel Pump Suction Control Valve 1x Gasket 1x O-Ring 2x Screw Note* Please double check the Reference OE/OEM Number before Making the purchase.* Instruction is not included. Professional installation is recommended.* Contact us please for whatever we can help. ...

Application Compatible for Volkswagen Passat B5 (Typ 3B, 1996–2000) Compatible for Volkswagen Passat B5.5 (Typ 3BG, 2000–2005) Notice: No Top Mount Included, Modification Required If You Use OE Top Mount Specification Height adjustable:30mm Front Spring Rate: 6 kg/mm (336 in/lbs) Rear Spring Rate: 4 kg/mm (224 in/lbs)
Colour: Golden Warranty: one year warranty for any manufacturing defect Features- Adjustable ride height- Adjustable pre-load spring tension- Most components are made from 6063 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down.
- Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.- All inserts come with fitted rubber boots to protect the damper & keep clean.- Improve your handling performance without sacrifice comfortable ride.- A fast & affordable way to easily upgrade your car's appearance.- Easy installation with right tools.- Ideal for any track, drift & fast road & can also be used for daily driving. Notice- No Top Mount Included， Modification Required If You Use OE Top Mount- No instruction included; Professional installation is highly recommended.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.


...