Application 2007-2013 compatible for Toyota Tundra 2007-2013 compatible for Toyota Sequoia 2008-2013 compatible for Toyota Land Cruiser 2008-2013 compatible for Lexus LX570.OEM No.17610-0S010, 176100S010, 17610 0S010 Specific Warranty: one year warranty for any manufacture defect Condition: New Quantity:1 piece smog pump Notice- Instruction is not included. Professional installation is recommended
- Contact us please for whatever we can help
...

Application Compatible for Toyota COASTER 4.2L D 1HD-T 1990
- 1993 Compatible for Toyota Land Cruiser 4.2L D 1HD-T 1990
- 1997

...

Introduction MXR-B2 series (also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible for TOYOTA SUPRA 1993.05-2002.07 JPN JZA80 RZ, RZ-S，SZ, SZ-R compatible for TOYOTA SUPRA 1993-1998 USA JZA80L compatible for TOYOTA SOARER 1991.05-2000.03JPN JZZ30 2.5GT-T compatible for LEXUS SC300 1992-2000 USA JZZ30 compatible for LEXUS SC400 1992-2000 USA UZZ30 Specification Top mounts: standard rubber top mounts for front & rear Damping: not available Spring rate: front 10kg/mmrear 7 kg/mm Adjustable

Height: Yes lowering 1" to 3" Shock type: Twin tube Spring preload: 7-10 mm
Colour: gold Package includedcomplete coilovers for 2 front & 2 rear a pair wrench for height adjustment Dimensionweight: 23860g

Size: 63*51*21 cm Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance 2. Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts. 3. Twin-Tube structure allows sufficient stroke within the shock absorber. 4. Separate height adjustment does not affect damper stroke. 5. Height can be adjusted with coilovers installed on the vehicle. 6. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus, the special surface treatment improves the durability & performance. 7. Height Adjustment tools included. 8. Most pieces in our coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 9. Full rebuildable. Warranty: one year warranty for any manufacturing defect






...

Introduction MXR-B2 series (also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application Compatible for TOYOTA　SUPRA　1986.01-1990.08　JPN　MA70　GT TURBO, GT TWIN TURBO S compatible for TOYOTA　SUPRA　1986.01-1993.04　JPN　GA70　G, GT, GT TWIN TURBO compatible for TOYOTA　SUPRA　1987-1992　USA　MA70L compatible for TOYOTA　SUPRA　1990.08-1993.04　JPN JZA70　GT, TWIN TURBO, TWIN TURBO R compatible for TOYOTA　SOARER　1986.01-1991.05　JPN　GZ20　GT TWIN TURBO, TWIN TURBO L, 2.0VX compatible for TOYOTA　SOARER　1986.01-1991.05　JPN　MZ20　GT, GT LIMITEDSpecification Top mounts: rubber front & rear Damping: not available Spring rate: front 14kg/mm (784lbs/in) rear: 12 kg/mm (672 lbs/in) adjustable

Height: Yes lowering 1" to 3" shock type: Twin tube
Colour: gold body with black spring Package includedproduct included: complete coilovers 2 front & 2 rear a pair wrench for height adjustment Dimensionpackage weight: 25820g package dimension: 71*51*21 Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance 2， Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts. 3， Twin-Tube structure allows sufficient stroke within the shock absorber. 4， Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. 5， Separate height adjustment does not affect damper stroke. 6， Height can be adjusted with coilovers installed on the vehicle. 7， High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 8， Most pieces in our coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. Warranty: one year warranty for any manufacturing defect




...

Application Compatible for Toyota Supra JZA70, Mark II, Crown 1JZ-GTE 1JZ-GE 1JZ

Specification- Performance Con Rods-

...

Application Compatible for Toyota 4 Runner V6 & 4WD 2003-2019 compatible for Toyota FJ Cruiser V6 & 4WD 2007-2014 compatible for Toyota Tacoma V6 & 4WD 2005-2019

Specification- New.
- 100% Electrically Tested Prior to Leaving the Factory
- Direct replacement
- Built to strict quality control standards
- Package include: 1 x Differential Vacuum Actuator (as the picture show) Interchange Part Number 41400-35030, 4140035030, 41400-35031, 4140035031, 41400-35032, 4140035032, 41400-35033, 4140035033, 41400-35034, 4140035034, Note- Please make sure it will fit your machine before purchasing it.
- Please check pictures for more details.
- If this item can not work properly for you, please contact us at any time.
- We promise we will do our best to serve you. Warranty: one year warranty for any manufacturing defect








...

Application Compatible for Toyota Tacoma Hilux 2RZFE 2.4 L Specification Performance Con Rods Type: Forged 4340 aircraft chrome moly quality steel for racing H-beam Conrods Quantity: 4 Pieces a set Bolts: Including Genuine ARP 2000 3/18" bolts Note: Extra cost for upgrading to ARP L19 bolts Bolts

Size: ARP 2000 5/16" bolts Tolerance: Balanced to +/- 1 gram in set Piston Bolt Hole: +-4/1000mm Power: 600hp ~ 800hp per set Strength of the fastening (PSI): 200, 000/230, 000 PSI Torque: 48ft ≈ 65 NM Top acceleration: 7000-9000rpm warranty: one year warranty for any manufacturing defect Dimensions Center to center length: 135mm Big end diameter:56mm Small end diameter: 24mm Big end

Width: 25.8mm Small end

Width: 25.8mm Feature-Forged SAE 4340 Chrome Moly Steel for the highest strength & durability, dedicated for Racing-Designed & processed by CNC machine.-All big & small ends are finished with SUNNEN honing machine-Precision alignment sleeves positively locate the rod cap, maintaining big end bore size & eliminating cap walk-100% X-rayed, sonic tested & magnafluxed-Multi-stage heat treated-Shot peened to relieve stress-Come with the bronzed bushing suitable for the floating piston pin Note Professional installation is highly recommended (No Instruction Included) Custom Service: If there's no conrods you need on our site, we would be happy to help determine your requirements & develop a solution with you to satisfy your needs. Learn more about CUSTOM SERVICE





...

Application Compatible for Triumph Spitfire 1500, Late 1300 Specification Performance Con Rods Type: Forged 4340 aircraft chrome moly quality steel for racing H-beam Conrods Quantity: 4 Pieces a set Bolts: Including Genuine ARP 2000 5/16" bolts Note: Extra cost for upgrading to ARP L19 bolts Bolts

Size: ARP 2000 5/16" bolts Tolerance: Balanced to +/- 1 gram in set Piston Bolt Hole: +-4/1000mm Power: 600hp ~ 800PS per set Strength of the fastening (PSI): 220, 000/230, 000 PSI Torque: 48ft ≈ 65 NM Top acceleration: 7000rpm warranty: one year warranty for any manufacturing defect Dimensions Center to center length: 146.05mm Big end diameter: 51.34mm Small end diameter: 20.63mm Big end

Width: XXSmall end

Width: XXFeature- Forged SAE 4340 Chrome Moly Steel for the highest strength & durability, dedicated for Racing- Designed & processed by CNC machine.- All big & small ends are finished with SUNNEN honing machine- Precision alignment sleeves positively locate the rod cap, maintaining big end bore size & eliminating cap walk- 100% X-rayed, sonic tested & magnafluxed- Multi-stage heat treated- Shot peened to relieve stress- Come with the bronzed bushing suitable for the floating piston pin Note- Professional installation is highly recommended (No Instruction Included)- Custom Service: If there's no conrods you need on our site, we would be happy to help determine your requirements & develop a solution with you to satisfy your needs.





...

Application Compatible for Triumph TR5 TR250 for GT6 TR6 late model Specification Performance Con Rods Type: Forged 4340 aircraft chrome moly quality steel for racing H-beam Conrods Quantity: 6 Pieces as showing in picture Bolts: Including ARP 2000 bolts Note: Extra cost for upgrading to ARP L19 bolts Bolts

Size: ARP 2000 5/16" bolts Tolerance: Balanced to +/- 1 gram in set Piston Bolt Hole: +-4/1000mm Power: 600hp ~ 800PS per set Strength of the fastening (PSI): 220, 000/230, 000 PSI Torque: 48ft ≈ 65 NM Top acceleration: 7000rpm warranty: one year warranty for any manufacturing defect Dimensions Center to center length: 146.05mm Big end diameter: 51.34mm Small end diameter: 20.63mm Big end

Width: xx Small end

Width: xx Feature- Forged SAE 4340 Chrome Moly Steel for the highest strength & durability, dedicated for Racing
- Designed & processed by CNC machine.
- All big & small ends are finished with SUNNEN honing machine
- Precision alignment sleeves positively locate the rod cap, maintaining big end bore size & eliminating cap walk
- 100% X-rayed, sonic tested & magnafluxed
- Multi-stage heat treated
- Shot peened to relieve stress
- Come with the bronzed bushing suitable for the floating piston pin Note- Professional installation is highly recommended (No Instruction Included)
- Custom Service: If there's no conrods you need on our site, we would be happy to help determine your requirements & develop a solution with you to satisfy your needs.
- Learn more about CUSTOM SERVICE














...

Application Compatible for Triumph TR3 TR4 4340 Forged Specification Performance Con Rods Type: Forged 4340 aircraft chrome moly quality steel for racing H-beam Conrods Quantity: 4 Pieces a set Bolts: Including Genuine ARP 2000 bolts Note: Extra cost for upgrading to ARP L19 bolts Bolts

Size: ARP 2000 3/8" bolts Tolerance: Balanced to +/- 1 gram in set Piston Bolt Hole: +-4/1000mm Power: 600hp ~ 800PS per set Strength of the fastening (PSI): 220, 000/230, 000 PSI Torque: 48ft ≈ 65 NM Top acceleration: 9000rpm warranty: one year warranty for any manufacturing defect Dimensions Center to center length: 158.75mm Big end diameter: 56.72mm Small end diameter: 22mm Big end

Width: XXSmall end

Width: XXFeature-Forged SAE 4340 Chrome Moly Steel for the highest strength & durability, dedicated for Racing-Designed & processed by CNC machine.-All big & small ends are finished with SUNNEN honing machine-Precision alignment sleeves positively locate the rod cap, maintaining big end bore size & eliminating cap walk-125% X-rayed, sonic tested & magnafluxed-Multi-stage heat treated-Shot peened to relieve stress-Come with the bronzed bushing suitable for the floating piston pin Note Professional installation is highly recommended (No Instruction Included) Custom Service: If there's no conrods you need on our site, we would be happy to help determine your requirements & develop a solution with you to satisfy your needs. Learn more about CUSTOM SERVICE





...