Introduction MXR-B3 series (also called MXR-SLC) based on MXR-B2 series (also called MXR-SNA) coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for Subaru Impreza WRX GC8GC6 1993-2001 Notice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Top mounts: Pillow ball top mounts Damping: 24 levels rebound damping adjustable Shock type: Twin tube Adjustable

Height: Yes lowering 1'' to 3'' Adjustable camber plate: Front Only Spring preload: 7-10 mm Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in)
Colour: Red Package includedcomplete coilovers 2 front & 2 rear as shown in the picture Dimension
Size: 63*51*21 cm Weight: 27.1kg Feature Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. A 24 rebound damping adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Twin-Tube structure allows sufficient stroke within the shock absorber. Complete Suspension Kit of 4 Shock Absorbers 4 Springs for an easy installation. Separate height adjustment does not affect damper stroke. Height can be adjusted with coilovers installed on the vehicle. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. Height Adjustment tools included. Camber plate top mounts help to eliminate the need for a separate camber kit. Pillow ball top mount
- It improves the steering feel & response. Most pieces in our coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. Warranty: one year warranty for any manufacturing defect






...

Application Compatible for Suzuki Forenza I4 2.0L engine 2006-2008 compatible for Suzuki Reno I4 2.0L engine 2006-2008OEMand Part Number 25368821, 96417730 Feature- New Electronic Throttle Body Assembly
- This Throttle Body is manufactured & tested to the strictest OE standards for unparalleled performance.
- Built for trouble-free ownership & 100% visually inspected & quality tested.
- This Throttle Body is backed by our 100% satisfaction guarantee.
- 100% electrically tested prior to leaving the factory
- 100% factory test
- finest top quality Aftermarket part Note Professional Installation is Highly Recommended. No Instruction Included. Warranty: one year warranty for any manufacturing defect





...

Application Compatible for Suzuki GSX-R1000 2001-2004 K1 K2 K3 K4

Specification- Performance Con Rods
- Type: Forged


...

Application Compatible for Suzuki GSXR 6002006-2010 compatible for Suzuki GSXR 7502006-2010 compatible for Suzuki GSXR 10002007-2008 Feature These links can be adjusted by a turn of the hex Additional components may be required to lower a vehicle. It's installer's responsibility to verify the vehicle operates correctly Note Professiona installaiton is recommened, No Instruction included. Please do not hesitate to contact us for anything we can help Warranty: one year warranty for any manufacturing defect ...

Application Compatible for Suzuki LT A50 model 2002
- 2005 compatible for Suzuki JR 50 model 1978-2006 compatible for Suzuki LT
...

Application Compatible for Chevrolet Tahoe/ Compatible for GMC Yukon 2000-2014 Third Row compatible for Seat Bracket, Strikers & Bolts Kit Features Install a 3rd row seating will make more capacity for your car. Installation is much easier than the factory brackets. Notice- No instruction included; Professional installation & alignment suggested.
- Please check our store for other auto parts you may be interested in.
- Please feel free to contact us for whatever we can help. Warranty: one year warranty for any manufacturing defect

...

Application Compatible for Toyota 4 Runner 1996-2002

Specification-
Colour: Black
- Package: Side Panel



...

Application Compatible for Toyota 4AG 4AGE 4AGZE AE86 Celica Corolla MR2 GTS 1.6 L Compatible for AA63 Carina 1983.06–1985 Compatible for AT160 Carina 1985–1988 Compatible for AT171 Carina 1988–1992 Compatible for AA63 Celica 1983–1985 Compatible for AT160 Celica 1985–1989 Compatible for AE82 Corolla saloon, FX 1984.10–1987 Compatible for AE86 Corolla Levin 1983.05–1987 Compatible for AE92 compatible for Corolla 1987–1993 Compatible for AE101 compatible for Corolla 1991–1995 Compatible for AE101 Sprinter 1991–1995 Compatible for AT141 Corona 1983.10–1985 Compatible for AT160 Corona 1985–1988 Compatible for AW11 MR2 1984.06–1989 Compatible for AE82 Sprinter 1984.10–1987 Compatible for AE86 Sprinter Trueno 1983.05–1987 Compatible for AE92 Sprinter 1987–1992 Compatible for AE82/AE92 compatible for Corolla GLi Twincam/ Conquest RSi 1986–1993 Compatible for Chevrolet for NOVA (based on compatible for Corolla AE82) Compatible for Geo Prizm GSi (based on compatible for Toyota AE92 chassis) 1990–1992 Dimensions Center to center length:122mm/4.803" Big end diameter:45mm/1.772" Small end diameter:20mm/0.787" Big end
Width:21.8mm/0.858" Small end
Width:21.8mm/0.858" Specification* The big end bores are honed to a +/-.01mm tolerance* The connecting rods all include ARP 2000 bolts, which are rated at 220, 000 psi, & the optional ARP L19 material at 260, 000 psi is available as an upgraded product* Quantity: 4 Pieces a set* Bolts: Including Genuine 3/8" ARP 2000 bolts (Note: Extra cost for upgrading to ARP L19 bolts)*

Material: Forged 4340 aircraft chrome moly quality steel for racing* Advertised Horsepower Rating:200HP/piece* Warranty: one year warranty for any manufacturing defect Feature 1.

Material: Forged SAE 4340 Chrome Moly Steel for the highest strength & durability, dedicated for Racing； 2. Genuine ARP 2000 bolts, Optional ARP L19 fasteners available as an upgrade；3. H-Beam design reduces weight without compromising strength；4. Heat-treating & Shot-peened for remained consistent & strong. Shot-peened finish to remove potential for stress risers； 5.100% CNC machined, Precision rod cap alignment dowels；6. Bores finished to +/-. 01 mm；7. Balanced to within +/- 1 g per rod；8. Each rod is magnetic particle tested to ensure free of flaws；9.100% X-rayed, sonic tested；10. Custom Service. Note* Please check the OEM Number before purchase. This is the best way to confirm the fitment.* Please check our store for other auto parts you may be interested in. * Please feel free to contact us for whatever we can help.





...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket height adjustable coilovers suspension kit compatible for BMW series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Lexus Es 350 2007
- 2008 All Models Compatible for Toyota Avalon 2006 Built After 12/05 Production Date Compatible for Toyota Avalon 2007
- 2011 All Models Compatible for Toyota Camry 2007
- 2011 All Models (Notice： Will Not Fit Hybrid Models)OEM Numebr or Interchange Part Number 172307, 172308, 172309, 172310182307, 182308, 182309, 182310172310, 172309, 272308, 272307532307, 532308, 532309, 532310SR4108, SR4109, SR4112, SR4113SR4112, SR4113, SR4138, SR413915361, 15362, 11741, 11742E216930, E216927, EB216924, EB216921182308, SR4109, 1331582L, SR4113, 1331607 L Specifications Quantity: 2 piece front + 2 pieces rear Spring rate Front:12 kg/mm (672 lbs/in) Spring rate Rear:9 kg/mm (504 lbs/in) Damper: Non adjustable Damper Adjustable

Height: Yes Warranty: one year warranty for any manufacturing defect Feature- Adjustable ride height.- Adjustable pre-load spring tension.- Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response.- Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down.- Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.
- All inserts come with fitted rubber boots to protect the damper & keep clean.- Improve your handling performance without sacrifice comfortable ride.- A fast & affordable way to easily upgrade your car's appearance.- Easy installation with right tools.- Ideal for any track, drift & fast road & can also be used for daily driving. Notice- No instruction included; Professional installation is highly recommended.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.







...

Introduction MXR-B2 series (also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application Compatible for Lexus ES300 1997-2001 Exclude Adjustable Suspension Compatible for Lexus ES300 1995-1996 ALL Compatible for Lexus ES300 1992-1994 w/ Sealed Struts Compatible for Toyota Avalon 1995-2003 ALL Compatible for Toyota Camry 1995-2001 ALL Compatible for Toyota Camry 1992-1994 ALL w/ Sealed Struts Compatible for Toyota Solara 1999-2003 ALL Specification Top mount: front camber plate; rear pillow ball Front spring rate:10 kg/mm (560 lbs/in) Rear spring rate:6 kg/mm (336 lbs/in) Adjustable

Height: Yes lowering 1" to 3" Spring Preload: 7-10 mm Shock type： Twin tube
Colour: blue body with black spring Package included Complete coilovers assembly 2 front & 2 rear A pair wrench for height adjustment Dimension Package dimension: 71*51*21 Weight: 31220g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2. Camber plate top mounts help to eliminate the need for a separate camber kit. 3. Twin-Tube structure allows sufficient stroke within the shock absorber. 4. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. 5. Separate height adjustment does not affect damper stroke & height can be adjusted with coilovers installed on the vehicle. 6. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 7. Most pieces in our coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 8. Steel shock bodies with special surface treatment to improve the durability. 9. Full rebuildable Warranty: one year warranty for any manufacturing defect




...