Application Compatible for Subaru Impreza GC8 GC6 1993-2001 Notice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specifications Top mounts: Pillow ball top mounts Quantity: Complete coilovers 2 front & 2 rear as shown in the picture Adjustable damper: 24 levels rebound dampening adjustable Adjustable

Height: Yes lowering 1'' to 3'' Adjustable camber plate: Front only Spring rate front: 10 kg/mm (560 in/lbs) Spring rate rear: 6 kg/mm (336 lbs/in) Spring preload: 7-10 mm Shock type: Twin tube
Colour: Gloden Warranty: 1 year warranty for any manufacturing defect Feature- Pillow ball top mount --- this design helps combat noise while tuning. It also improves the steering feel & response.- Twin-Tube Structure --- For Low Resiliency & Securing Sufficient Stroke.- 24 levels of adjustable damper --- This means that you can perfectly dial in your coilover system for both handling & comfort.- Full Length Adjustment --- separate height adjustment without sacrifice of damper stroke & without removing the coilover out from the car.- High Tensile performance spring --- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.- Most pieces in our Coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components.- Steel shock bodies are electroplated with Zinc for anti Anti-corrosion.- All inserts come with fitted rubber boots to protect the damper & keep clean.- Full rebuildable. Notice- Please double confirm before placing orders.- No instruction included; Professional installation is highly recommended.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.


...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket height adjustable coilovers suspension kit compatible for Subaru series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Subaru Impreza WRX GC8 93-01 Don't fit AWD Model Notice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Quantity: Complete coilovers 2 front & 2 rear as shown in the picture Adjustable damper: No Adjustable

Height: Yes Adjustable camber plate: Front only Front & rear upper mounts: Pillow ball Spring rate front: 10 kg/mm (556 in/lbs) Spring rate rear: 6 kg/mm (336 lbs/in) Spring preload: 7-10 mm Drop Height Front: 1-3 inch Drop Height Rear: 1-3 inch Shock type: Twin tube
Colour: Gloden Warranty: one year warranty for any manufacturing defect Feature- Pillow ball top mount --- this design helps combat noise while tuning. It also improves the steering feel & response.
- Twin-Tube Structure --- For Low Resiliency Securing Sufficient Stroke.
- Full Length Adjustment --- separate height adjustment without sacrifice of damper stroke without removing the coilover out from the car.
- High Tensile performance spring --- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.
- Most pieces in our Coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components.
- Steel shock bodies are electroplated with Zinc for anti Anti-corrosion.
- All inserts come with fitted rubber boots to protect the damper & keep clean.
- Full rebuildable. Note- No instruction included; Professional installation is highly recommended.
- Please check our store for other auto parts you may be interested in.
- Please feel free to contact us for whatever we can help.












...

Application Compatible for Subaru Impreza 2002-2007 GDA GDBCompatible for Subaru Impreza STI 2004 GDA GDBCompatible for Subaru Impreza Bugeye/ Blobeye Compatible for Subaru Impreza Outback Sport Compatible for Saab 9-2X 2004 2005

Specification- Condition: New- Quantity: One set with 2 pieces- Adjustable Timing Mark: YES- Bushing: Pillow Ball deisgn for adjustment precisely-
Colour: Blue- Warranty: one year warranty
- Corresponding suspension parts: The corresponding coilover, suspension arms are also available. Please check our store or contact us for the deails. Feature- All components are carefully selected with the quality material for durable use- Super strong & significant improvement for drifting cars- Adjust camber independent of caster- Large range of adjustment while still allowing caster & camber to be adjusted from the top without cutting the strut tower- Maintain proper strut angle at any position by not pre-setting the angle- Provide proper orientation with a replaceable urethane bushing- Minimize noise associated with the urethane bushing Notice- The picture with

Dimensions is available. Please contact us for it if you need.- No instruction included; professional suggested.





...

Introduction MXR-B3 series (also called MXR-SLC) based on MXR-B2 series (also called MXR-SNA) coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for Subaru Impreza WRX GC8GC6 1993-2001 Notice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Top mounts: Pillow ball top mounts Damping: 24 levels rebound damping adjustable Shock type: Twin tube Adjustable

Height: Yes lowering 1'' to 3'' Adjustable camber plate: Front Only Spring preload: 7-10 mm Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in)
Colour: Red Package includedcomplete coilovers 2 front & 2 rear as shown in the picture Dimension
Size: 63*51*21 cm Weight: 27.1kg Feature Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. A 24 rebound damping adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Twin-Tube structure allows sufficient stroke within the shock absorber. Complete Suspension Kit of 4 Shock Absorbers 4 Springs for an easy installation. Separate height adjustment does not affect damper stroke. Height can be adjusted with coilovers installed on the vehicle. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. Height Adjustment tools included. Camber plate top mounts help to eliminate the need for a separate camber kit. Pillow ball top mount
- It improves the steering feel & response. Most pieces in our coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. Warranty: one year warranty for any manufacturing defect






...

Application Compatible for Suzuki Forenza I4 2.0L engine 2006-2008 compatible for Suzuki Reno I4 2.0L engine 2006-2008OEMand Part Number 25368821, 96417730 Feature- New Electronic Throttle Body Assembly
- This Throttle Body is manufactured & tested to the strictest OE standards for unparalleled performance.
- Built for trouble-free ownership & 100% visually inspected & quality tested.
- This Throttle Body is backed by our 100% satisfaction guarantee.
- 100% electrically tested prior to leaving the factory
- 100% factory test
- finest top quality Aftermarket part Note Professional Installation is Highly Recommended. No Instruction Included. Warranty: one year warranty for any manufacturing defect





...

Application Compatible for Suzuki GSXR 6002006-2010 compatible for Suzuki GSXR 7502006-2010 compatible for Suzuki GSXR 10002007-2008 Feature These links can be adjusted by a turn of the hex Additional components may be required to lower a vehicle. It's installer's responsibility to verify the vehicle operates correctly Note Professiona installaiton is recommened, No Instruction included. Please do not hesitate to contact us for anything we can help Warranty: one year warranty for any manufacturing defect ...

Application Compatible for Suzuki LT A50 model 2002
- 2005 compatible for Suzuki JR 50 model 1978-2006 compatible for Suzuki LT
...

Application Compatible for Suzuki 1987
- 2006 LT 80 Packing included 1x Cylinder Block. 1x Piston. 1x Piston Pin. 1x Bearing. 2x
...

Application Compatible for Chevrolet Tahoe/ Compatible for GMC Yukon 2000-2014 Third Row compatible for Seat Bracket, Strikers & Bolts Kit Features Install a 3rd row seating will make more capacity for your car. Installation is much easier than the factory brackets. Notice- No instruction included; Professional installation & alignment suggested.
- Please check our store for other auto parts you may be interested in.
- Please feel free to contact us for whatever we can help. Warranty: one year warranty for any manufacturing defect

...

Application Compatible for Toyota 4 Runner 1996-2002

Specification-
Colour: Black
- Package: Side Panel



...