More From Contributor

$309
Application Compatible for Nissan Fairlady Z 370Z Z34 2008 -Compatible for Infiniti G37 370GT 2009
- Does NOT Fit AWDSpecification
...
Available
$323
Application Compatible for Dodge for Caliber (excluding compatible for SRT-4 )2007-2012 Compatible for Jeep Compass (MK) Compatible for FWD 2008-2017 Compatible for Jeep Compass (MK) 4WD (without Off Road Package) 2008-2017 Compatible for Jeep Patriot (MK) Compatible for FWD 2008-2010 Specification Quantity: 2 pieces front + 2 pieces rear as shown in the picture Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 8 kg/mm (448 lbs/in) Adjustable Damper: Non adjustable Damper Adjustable

Height:
Yes Adjustable camber plate: No
Colour: Golden Warranty: one year warranty for any manufacturing defect Attention: As it is high performance aftermarket coil over, few modification might be required for some vehicles Features* Adjustable ride height* Adjustable pre-load spring tension* Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response* Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down. * Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.* All inserts come with fitted rubber boots to protect the damper & keep clean.* A fast & affordable way to easily upgrade your car's appearance.* Easy installation with right tools. Notice* No instruction included; Professional installation alignment suggested.* Please check our store for other auto parts you may be interested in.* Please feel free to contact us for whatever we can help.



...
Available
$349
Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket adjustable coilovers suspension kit compatible for BMW Z4 series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for 2002
- 2008 BMW Z4 E85/E86 (excl. M Models) Specification Quantity:2 pieces front + 2 pieces rear Spring rate Front:10kg/mm Spring rate Rear:8kg/mm Damper:24 ways adjustable damper Adjustable
Height: Yes Adjustable camber plate: No Warranty: one year warranty for any manufacturing defect Features- Adjustable ride height- Adjustable pre-load spring tension- Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response- Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down. - Hign Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.- All inserts come with fitted rubber boots to protect the damper & keep clean.- Improve your handling performance without sacrifice comfortable ride.- A fast & affordable way to easily upgrade your car's appearance.- Easy installation with right tools.- Ideal for any track, drift & fast road & can also be used for daily driving. Notice- This item is not suitable for M Coupe, M Roadster.- No instruction included; Professional installation is highly recommended.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.



...
Available
$279
Application Compatible for Honda Fit USA Models 2007-2008 Specification Quantity: 2 pieces front + 2 pieces rear Front Spring Rate: 10kg/mm (556 lbs/in) Rear Spring Rate: 8kg/mm (448 lbs/in) Damper: Non adjustable damper force Adjustable

Height:
Yes Camber Plate: Not Included
Colour: Golden Warranty: one year warranty for any manufacturing defect Feature- Adjustable ride height- Adjustable pre-load spring tension- Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response- Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down.
- Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.- All inserts come with fitted rubber boots to protect the damper & keep clean.- A fast & affordable way to easily upgrade your car's appearance.- Easy installation with right tools. Note No instruction included; Professional installation & alignment suggested. Please check our store for other auto parts you may be interested in. Please feel free to contact us for whatever we can help.




...
Available
$297
Introduction MXR-B3 series (also called MXR-SLC) based on MXR-B2 series (also called MXR-SNA) coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for Honda S2000 BASE MODEL/TYPE V AP1/AP2 2000-2009 Specification Top mounts: Standard rubber top mount front & rear Adjustable camber plate: No Damping: 24 ways damping adjustable Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 10 kg/mm (560 lbs/in) Spring length Front: 180mm Spring length Rear: 230mm Adjustable

Height:
lowering 1-3 inch Coilover overall length Front: 430mm-480mm Coilover overall length Rear: 515mm-580mm Shock type: Twin tube Spring preload: 7-10 mm
Colour: red Package includedcomplete coilovers 2 front & 2 rear as shown in the picture Dimension
Size: 63*51*21 cm Weight: 21.98kg Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance 2.24 levels of adjustable damper -- This allows you the ability to perfectly dial in your coilovers system. For a nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. For occasional track days, set it to full stiff. 3. Adjustable pre-load spring tension to reduce the shaking motion to a certain extent 4. Adjustable Camber Plate & Pillow ball top mount for sharpening steering response. (for some models) 5. CNC machined Aluminumtop mounts & lockers--
- excellent strength, & save weight 6. Heavy Duty Steel Lower Mounts--- Highly Durable & Reliable 7. High tensile spring---600, 000 times continuously test to assure it's high tensile strength. 8. All inserts come with fitted long rubber boots--- To protect the damper more well & be durable. 9. Twin-Tube structure ---provides excellent handling & control characteristics for most driving conditions 10. Corrosion Finish
- Anodized Aluminum & Powder Coated Carbon Steel Parts Warranty: one year warranty for any manufacturing defect






...
Available
$356
Application Compatible for Scion TC 2011-2016 AGT20 North America & Canada Market Compatible for Toyota Zelas 2011-2016 (Central America, China, Middle East, Africa, South America Market) Specification Quantity: 2 pieces front + 2 pieces rear Front Spring Rate: 8kg/mm (448 lbs/in) Rear Spring Rate: 8kg/mm (448 lbs/in) Damper: non damper force Adjustable

Height:
Yes Adjustable Camber Plate: Yes
Colour: Golden Warranty: one year warranty for any manufacturing defect Feature- Adjustable ride height- Adjustable pre-load spring tension- Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response- Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down.
- Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.- All inserts come with fitted rubber boots to protect the damper & keep clean.- A fast & affordable way to easily upgrade your car's appearance.- Easy installation with right tools. Note No instruction included; Professional installation & alignment suggested. Please check our store for other auto parts you may be interested in. Please feel free to contact us for whatever we can help.




...
Available
$336
Application Compatible for Subaru Legacy 2005-2009 (USA) BL9 BP9 compatible for Subaru Legacy B4 2003.05-2009.04JPN BLE BL5 compatible for Subaru Legacy TOURING WAGON 2003.05-2009.04JPN BP5 BPESpecification Top mounts: Front pillow ball top mount with camber plate Damping: 24 levels rebound damping adjustable Adjustable camber plate: Front only Spring rate Front: 7 kg/mm (392 lbs/in) Spring rate Rear: 12 kg/mm (672 lbs/in) Spring length Front: 200mm Spring length Rear: 190mm Adjustable

Height:
lowering 1-3 inch Coilover overall length Front: 460mm-550mm Coilover overall length Rear: 400mm-450mm Shock type: Twin tube Spring Preload: 7-10 mm
Colour: Gold Package included Complete coilover assembly kit for front & rear A pair wrench for height adjustment Dimension
Size: 63*51*21 cm Weight: 24.92kg Feature Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance A 24 rebound damping adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Camber plate top mounts help to eliminate the need for a separate camber kit. Pillow ball top mount
- It improves the steering feel & response. Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts. Twin-Tube structure allows sufficient stroke within the shock absorber. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. Separate height adjustment does not affect damper stroke. Height can be adjusted with coilovers installed on the vehicle. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. Height Adjustment tools included. Full rebuildable. Warranty: one year warranty for any manufacturing defect






...
Available
$287
Application Compatible for Subaru Legacy 2005-2009 (USA) BL9 BP9 compatible for Subaru Legacy B4 2003.05-2009.04JPN BLE BL5 compatible for Subaru Legacy TOURING WAGON 2003.05-2009.04JPN BP5 BPESpecification Top mounts: Front pillow ball top mount with camber plate Damping: Not available Adjustable camber plate: Front only Spring rate Front: 7 kg/mm (392 lbs/in) Spring rate Rear: 12 kg/mm (672 lbs/in) Spring length Front: 200mm Spring length Rear: 190mm Adjustable

Height:
lowering 1-3 inch Coilover overall length Front: 460mm-550mm Coilover overall length Rear: 400mm-450mm Shock type: Twin tube Spring Preload: 7-10 mm
Colour: Gold Package included Complete coilover assembly kit for front & rear A pair wrench for height adjustment Dimension
Size: 63*51*21 cm Weight: 25.8kg Feature Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance Camber plate top mounts help to eliminate the need for a separate camber kit. Pillow ball top mount
- It improves the steering feel & response. Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts. Twin-Tube structure allows sufficient stroke within the shock absorber. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. Separate height adjustment does not affect damper stroke. Height can be adjusted with coilovers installed on the vehicle. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. Height Adjustment tools included. Full rebuildable. Warranty: one year warranty for any manufacturing defect






...
Available
$308
Introduction MXR-B3 series (also called MXR-SLC) based on MXR-B2 series (also called MXR-SNA) coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for Subaru Legacy 2000-2004 BE sedan only Specification Top mounts: front
- pillow ball top mount with camber plate Rear
- standard rubber top mount Damping: 24 ways damping adjustable Spring rate Front: 9 kg/mm (504 lbs/in) Spring rate Rear: 12 kg/mm (672 lbs/in) Spring length Front: 190mm Spring length Rear: 190mm Adjustable

Height:
lowering 1-3inch Coilover overall length Front: 460mm-520mm Coilover overall length Rear: 400mm-450mm Shock type: Twin tube Spring Preload: 7-10 mm
Colour: golden Package includedcomplete coilovers 2 front & 2 rear a pair wrench for height adjustment Dimensionweight: 25820g

Size:
63*51*21 cm Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance 2.24 levels of adjustable damper -- This allows you the ability to perfectly dial in your coilovers system. For a nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. For occasional track days, set it to full stiff. 3. Adjustable pre-load spring tension to reduce the shaking motion to a certain extent 4. Adjustable Camber Plate & Pillow ball top mount for sharpening steering response. (for some models) 5. CNC machined Aluminumtop mounts & lockers--
- excellent strength, & save weight 6. Heavy Duty Steel Lower Mounts--- Highly Durable & Reliable 7. High tensile spring---600, 000 times continuously test to assure it's high tensile strength. 8. All inserts come with fitted long rubber boots--- To protect the damper more well & be durable. 9. Twin-Tube structure ---provides excellent handling & control characteristics for most driving conditions 10. Corrosion Finish
- Anodized Aluminum & Powder Coated Carbon Steel Parts Warranty: one year warranty for any manufacturing defect









...
Available
$329
Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket adjustable coilovers suspension kit compatible for Scion & compatible for Toyota series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Scion TC 2011-2016 AGT20 North America & Canada Market Compatible for Toyota Zelas 2011-2016 (Central America, China, Middle East, Africa, South America Market) Specification Quantity: 2 pieces front + 2 pieces rear Spring Rate Front: 8kg/mm (448 lbs/in) Spring Rate Rear: 8kg/mm (448 lbs/in) Damper: 24 ways damper force Adjustable

Height:
Yes Adjustable Camber Plate: Yes
Colour: Golden Warranty: one year warranty for any manufacturing defect Features- Adjustable ride height- Adjustable pre-load spring tension- 24 levels of adjustable damper -- This allows you the ability to perfectly dial in your coilovers system. For a nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. For occasional track days, set it to full stiff.- Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response- Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down.
- Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.- All inserts come with fitted rubber boots to protect the damper & keep clean.- A fast & affordable way to easily upgrade your car's appearance.- Easy installation with right tools.- Ideal for any track, drift & fast road & can also be used for daily driving. Notice- No instruction included; Professional installation & alignment suggested.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.





...
Available

Coilover Suspension Kits Compatible For MINI ONE / COOPER 2002
2003-2006 Adj. Damper

IntroductionA coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened - lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper and a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket adjustable coilovers suspension kit compatible for Mini Cooperseries. You can enjoy a comfortable riding experience in all road conditions.ApplicationCompatible for Mini Cooper R50 02-06Compatible for Mini Cooper S R53 02-06Compatible for Mini Cooper R52 Convertible 05-08SpecificationProduct included: complete coilovers 2 front and 2 rear/ springs and shocks for front and rear, a pair
wrench for height adjustment MaXpeedingrods Coilover kit is simply great for daily driverAdjustable damper: 24 Ways Adjustable DamperAdjustable camber plate: NoSpring rate: front: 6kg/mm (336 lbs/in) ;Rear: 6kg/mm (336 lbs/in)Adjustable height: Yes, lowering 1'' to 3''Shock type: Twin tubeSpring Preload: 7-10 mmColor:GoldenWarranty: one yearFeature* Adjustable ride height* Adjustable pre-load spring tension* Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, and aluminum helps keep the weight down.* Hi Tensile performance spring - Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability and performance.* All inserts come with
fitted rubber boots to protect the damper and keep clean.* Improve your handling performance without sacrifice comfortable ride.* A fast and affordable way to easily upgrade your car's appearance.* Easy installation with right tools.* Ideal for any track, drift and fast road and can also be used for daily driving.Notice- No instruction included; Professional installation & alignment suggested.- Please check your car information before purchase. If you are not sure, please contact us for help!- No drilling, cutting, or modification necessary.SPECIAL NOTES: Prior to installation, verify all hardware and properly tighten.
  • Click to be directed to retailers website:

    Buy

    Many items on our site can also be found here:

    Buy
    • External links may include paid for promotion
    Availability: In Stock
    $341

    Product Description

    Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
    - lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket adjustable coilovers suspension kit compatible for Mini Cooperseries. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Mini Cooper R50 02-06 Compatible for Mini Cooper S R53 02-06 Compatible for Mini Cooper R52 Convertible 05-08 Specification Product included: complete coilovers 2 front & 2 rear/ springs & shocks for front & rear, a pair wrench for height adjustment Ma Xpeedingrods Coilover kit is simply great for daily driver Adjustable damper: 24 Ways Adjustable Damper Adjustable camber plate: No Spring rate: front: 6kg/mm (336 lbs/in) ; Rear: 6kg/mm (336 lbs/in) Adjustable

    Height:
    Yes, lowering 1'' to 3'' Shock type: Twin tube Spring Preload: 7-10 mm Color: Golden Warranty: one year Feature* Adjustable ride height* Adjustable pre-load spring tension* Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down.* Hi Tensile performance spring
    - Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.* All inserts come with fitted rubber boots to protect the damper & keep clean.* Improve your handling performance without sacrifice comfortable ride.* A fast & affordable way to easily upgrade your car's appearance.* Easy installation with right tools.* Ideal for any track, drift & fast road & can also be used for daily driving. Notice- No instruction included; Professional installation & alignment suggested.- Please check your car information before purchase. If you are not sure, please contact us for help!- No drilling, cutting, or modification necessary.SPECIAL NOTES: Prior to installation, verify all hardware & properly tighten.

    Reviews/Comments

    Add New

    Intelligent Comparison

    Oooops!
    We couldn't find anything!
    Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
    Click to bump this page and we'll hurry up.

    Price History

    Oooops!
    We couldn't find any historical pricing!

    Vouchers

    No voucher codes found.
    Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

    Facebook

    Jargon Buster

    Tension - A force that is stretching an object
    Tension - Also known as stress, a situation where a human can not cope with emotional or physical threats
    rubber - Synthetic rubber is any artificial elastomer, usually a polymer, and is used as a substitute for natural rubber.
    rubber - Natural rubber is an elastomer derived from the latex containing sap of some plants.
    vehicle - A manufactured device used to transport people or cargo.
    Car - A machine used for transport which runs on roads
    weight - A measure of the force applied on an object by gravity. Measured metric in grams and kilos or imperial in lbs and oz
    professional - A term used to describe products or people which may be focused on specialist educational training
    cutting - The seperation of an object usually using a cutting tool such as a knife
    Weight - a measurement of how heavy an object appears due to the pull of gravity. For example the weight of an object on planet earth will be different to the weight of the object on the moon
    Components - Multiple items used to complete the product.
    Road - a manmade lane or a path that is used to speed up travel.
    Adjustable - Something that can be changed or slightly modified to fit.
    Treatment - A way in which medics care for patients illnesses. A manner which someone behaves to someone else.
    Affordable - Something that is within a set price range that can be afforded due to its reasonable price.
    Professional - A person that is trained within a profession.
    Manual - A book of instructions to build or operate items, also a form of labour which your hands are used.
    Experience - To gain further knowledge by practising.
    Twin - A pair of people or animals that are born at the same time.
    Adjustable - Something that can be changed in order to fit better.
    Performance - When someone is presenting a form of entertainment, also how well someone is doing within a role.
    Ideal - Something that satisfies a perfect criteria.

    Supplier Information

    Maxpeedingrods US
    Page Updated: 2024-03-27 14:14:37

    Community Generated Product Tags

    Oh No! The productWIKI community hasn't generated any tags for this product yet!
    Menu