Introduction MXR-B3 series (also called MXR-SLC) based on MXR-B2 series (also called MXR-SNA) coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for Mazda RX-7/ Compatible for Mazda Savanna RX-7 second generation FC3S 1985–1992 2 door coupe/2 door convertible Specification Top mount: Front camber plate；rear pillow ball Damping: 24 levels rebound damping adjustable Spring rate Front:10 kg/mm (560 lbs/in) Spring rate Rear: 8 kg/mm (448 lbs/in)​ Adjustable

Height: lowering 1-3 inch Shock type: Twin tube Spring Preload: 7-10 mm
Colour: gold body with black spring Package included Complete coilover assembly kit for front & rear A pair wrench for height adjustment Dimension Package dimension: 63*51*21 Weight: 25720g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2. A 24 rebound damping adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. 3. Camber plate top mounts help to eliminate the need for a separate camber kit. 4. Twin-Tube structure allows sufficient stroke within the shock absorber. 5. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. 6. Separate height adjustment does not affect damper stroke & height can be adjusted with coilovers installed on the vehicle. 7. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 8. Most pieces in our coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 9. Steel shock bodies with special surface treatment to improve the durability. 10. Full rebuildable Warranty: one year warranty for any manufacturing defect




...

Introduction MXR-B3 series (also called MXR-SLC) based on MXR-B2 series (also called MXR-SNA) coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for Chrysler Neon 2000-2002 Compatible for Dodge Neon 2000-2005 Compatible for Dodge Neon compatible for SRT-4 2003-2005 Compatible for Dodge SX 2.0 2003-2005 Compatible for Plymouth Neon 2000-2001 Specification Top mounts: Pillow ball top mounts Damping: 24 levels rebound damping adjustable Shock type: Twin tube Adjustable

Height: Yes lowering 1'' to 3'' Adjustable camber plate: Yes Spring preload: 7-10 mm Spring rate Front: 8 kg/mm (448 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in)
Colour: Red Package includedproduct included: complete coilovers 2 front & 2 rear as shown in the picture Dimension
Size: 71*51*21 cm Weight: 30.66kg Feature Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. A 24 rebound damping adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Twin-Tube structure allows sufficient stroke within the shock absorber. Pillow ball top mount
- It improves the steering feel & response. Camber plate top mounts help to eliminate the need for a separate camber kit. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. Separate height adjustment does not affect damper stroke. Height can be adjusted with coilovers installed on the vehicle. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. Height Adjustment tools included. Full rebuildable. Warranty: one year warranty for any manufacturing defect






...

Application Compatible for Toyota Corolla E90 E100 E110 AE92 AE101 AE111 1988-1999 Specification Front Top Mount pillow ball with camber plate Rear top mount pillow ball Damping 24 levels rebound damping adjustable Spring rate Front 8 kg/mm (448 lbs/in) Spring rate Rear 6 kg/mm (336 lbs/in) Adjustable height lowering 1-3 inch Shock Type Twin tube Spring Preload 7-10 mm Color black body with blue spring Package included Complete Coilover assembly kit for front & rear A pair wrench for height adjustment Feature 1. Lowered height adjustment from 1"
- 3" which allow a lower centre of gravity & also add a more aggressive stance.2. A 24 rebound damping adjustment level allows you the ability to perfectly dial in your Coilover setup. You will experience better ride quality in all road conditions.3. Pillow ball top mounts improve the steering feel & response.4. Full-length dust boot keeps shaft & oil seal from damage.5. Upgraded damper adjust knob makes damping setting easier.6. Upgraded valving for a more smooth ride.7. Twin-Tube structure allows sufficient stroke within the shock absorber.8. High-Performance Damping Oil--maintains a stable viscosity in a broad temperature range, which sustains smooth stroke & reliable damping force in a variety of circumstances.9. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%.10. Decent appearance benefits from CNC machined parts & special surface treatment.11. Most pieces in our Coilover systems, including mounts, collars & spring perches, are made from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust-resistant components.12. Complete Suspension Kit of 4 Shock Absorbers 4 Springs for an easy installation.13. Separate height adjustment does not affect damper stroke & height can be adjusted with coilovers installed on the vehicle.14. All coilovers were produced & assembled at the dust-free factory which guaranteed the highest quality.15. Camber plate top mounts help to eliminate the need for a separate camber kit. Dimension Package dimension: 63*51*21 Weight: 27300g Warranty: one year warranty for any manufacturing defect

...

Application Compatible for Subaru Impreza STi For 2011-2013 Limited Sedan 4D 2.5L DOHC Turbocharged For 2011-2013 Sedan 4D 2.5L DOHC Turbocharged For 2010 Special Edition Wagon 4D 2.5L DOHC Turbocharged For 2008-2013 STi Wagon 4D 2.5L DOHC Turbocharged Specification Quantity: 2 piece front + 2 pieces rear + 2 spanners Spring rate Front: 8 kg/mm (448 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Adjustable damper: 24 ways Adjustable Damper Adjustable

Height: Yes Adjustable camber plate: Yes
Colour: Golden Warranty: one year warranty for any manufacturing defect Feature- Adjustable ride height- Adjustable pre-load spring tension- 24 levels of adjustable damper -- This allows you the ability to perfectly dial in your coilovers system. For a nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. For occasional track days, set it to full stiff.- Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response- Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down.
- Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.- Improve your handling performance without sacrifice comfortable ride.- All inserts come with fitted rubber boots to protect the damper & keep clean.- A fast & affordable way to easily upgrade your car's appearance.- Easy installation with right tools.- Ideal for any track, drift & fast road & can also be used for daily driving. Note No instruction included; Professional installation & alignment suggested. Please check our store for other auto parts you may be interested in. Please feel free to contact us for whatever we can help.




...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket height adjustable coilovers suspension kit compatible for Mazda series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Mazda 3 BK 2004-2009 Compatible for Mazda 3 BL 2009-2013 （
Includes: Mazdaspeed 3） Specification Product included: Complete coilovers 2 front & 2 rear as shown in the picture Top mounts: Front pillow ball top mounts Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Spring Preload: 7-10 mm Shock type： Twin tube We also have other colors Daily Driving Scene To The Sunday Track Damper: Non adjustable Damper Shock type: Twin tube Adjustable

Height: Yes lowering 1'' to 3'' Adjustable camber plate: No Spring preload: 7-10 mm
Colour: Golden Warranty: 1 year warranty for any manufacturing defect Features- Able to lower ride height by 1''-3''; allows user to have a more aggressive stance.- The user can enjoy a comfortable riding experience in all road conditions.- Twin-Tube Shock design is used for low internal frictional resistance in order to increase efficiency & keep shock temps low.- Height adjustment does not sacrifice damper stroke length.- These coilovers are able to have their height adjusted without being taken out of the car.- High Tensile strength performance spring---Tested under a 600, 000 time continuous compression test, the spring distortion was less than 0.04%. Plus, the special surface treatment improves the durability & performance.- Adjustment tools included in the kit. Notice- No instruction included; Professional installation is highly recommended.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.




...

Application Compatible for Dodge for Caliber (excluding compatible for SRT-4 )2007-2012 Compatible for Jeep Compass (MK) Compatible for FWD 2008-2017 Compatible for Jeep Compass (MK) 4WD (without Off Road Package) 2008-2017 Compatible for Jeep Patriot (MK) Compatible for FWD 2008-2010 Specification Quantity: 2 pieces front + 2 pieces rear as shown in the picture Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 8 kg/mm (448 lbs/in) Adjustable Damper: Non adjustable Damper Adjustable

Height: Yes Adjustable camber plate: No
Colour: Golden Warranty: one year warranty for any manufacturing defect Attention: As it is high performance aftermarket coil over, few modification might be required for some vehicles Features* Adjustable ride height* Adjustable pre-load spring tension* Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response* Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down. * Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.* All inserts come with fitted rubber boots to protect the damper & keep clean.* A fast & affordable way to easily upgrade your car's appearance.* Easy installation with right tools. Notice* No instruction included; Professional installation alignment suggested.* Please check our store for other auto parts you may be interested in.* Please feel free to contact us for whatever we can help.



...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket adjustable coilovers suspension kit compatible for BMW Z4 series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for 2002
- 2008 BMW Z4 E85/E86 (excl. M Models) Specification Quantity:2 pieces front + 2 pieces rear Spring rate Front:10kg/mm Spring rate Rear:8kg/mm Damper:24 ways adjustable damper Adjustable
Height: Yes Adjustable camber plate: No Warranty: one year warranty for any manufacturing defect Features- Adjustable ride height- Adjustable pre-load spring tension- Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response- Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down. - Hign Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.- All inserts come with fitted rubber boots to protect the damper & keep clean.- Improve your handling performance without sacrifice comfortable ride.- A fast & affordable way to easily upgrade your car's appearance.- Easy installation with right tools.- Ideal for any track, drift & fast road & can also be used for daily driving. Notice- This item is not suitable for M Coupe, M Roadster.- No instruction included; Professional installation is highly recommended.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.



...

Application Compatible for Honda Fit USA Models 2007-2008 Specification Quantity: 2 pieces front + 2 pieces rear Front Spring Rate: 10kg/mm (556 lbs/in) Rear Spring Rate: 8kg/mm (448 lbs/in) Damper: Non adjustable damper force Adjustable

Height: Yes Camber Plate: Not Included
Colour: Golden Warranty: one year warranty for any manufacturing defect Feature- Adjustable ride height- Adjustable pre-load spring tension- Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response- Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down.
- Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.- All inserts come with fitted rubber boots to protect the damper & keep clean.- A fast & affordable way to easily upgrade your car's appearance.- Easy installation with right tools. Note No instruction included; Professional installation & alignment suggested. Please check our store for other auto parts you may be interested in. Please feel free to contact us for whatever we can help.




...

Introduction MXR-B3 series (also called MXR-SLC) based on MXR-B2 series (also called MXR-SNA) coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for Honda S2000 BASE MODEL/TYPE V AP1/AP2 2000-2009 Specification Top mounts: Standard rubber top mount front & rear Adjustable camber plate: No Damping: 24 ways damping adjustable Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 10 kg/mm (560 lbs/in) Spring length Front: 180mm Spring length Rear: 230mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 430mm-480mm Coilover overall length Rear: 515mm-580mm Shock type: Twin tube Spring preload: 7-10 mm
Colour: red Package includedcomplete coilovers 2 front & 2 rear as shown in the picture Dimension
Size: 63*51*21 cm Weight: 21.98kg Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance 2.24 levels of adjustable damper -- This allows you the ability to perfectly dial in your coilovers system. For a nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. For occasional track days, set it to full stiff. 3. Adjustable pre-load spring tension to reduce the shaking motion to a certain extent 4. Adjustable Camber Plate & Pillow ball top mount for sharpening steering response. (for some models) 5. CNC machined Aluminumtop mounts & lockers--
- excellent strength, & save weight 6. Heavy Duty Steel Lower Mounts--- Highly Durable & Reliable 7. High tensile spring---600, 000 times continuously test to assure it's high tensile strength. 8. All inserts come with fitted long rubber boots--- To protect the damper more well & be durable. 9. Twin-Tube structure ---provides excellent handling & control characteristics for most driving conditions 10. Corrosion Finish
- Anodized Aluminum & Powder Coated Carbon Steel Parts Warranty: one year warranty for any manufacturing defect






...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket adjustable coilovers suspension kit compatible for Mini Cooperseries. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Mini Cooper R50 02-06 Compatible for Mini Cooper S R53 02-06 Compatible for Mini Cooper R52 Convertible 05-08 Specification Product included: complete coilovers 2 front & 2 rear/ springs & shocks for front & rear, a pair wrench for height adjustment Ma Xpeedingrods Coilover kit is simply great for daily driver Adjustable damper: 24 Ways Adjustable Damper Adjustable camber plate: No Spring rate: front: 6kg/mm (336 lbs/in) ; Rear: 6kg/mm (336 lbs/in) Adjustable

Height: Yes, lowering 1'' to 3'' Shock type: Twin tube Spring Preload: 7-10 mm Color： Golden Warranty: one year Feature* Adjustable ride height* Adjustable pre-load spring tension* Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down.* Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.* All inserts come with fitted rubber boots to protect the damper & keep clean.* Improve your handling performance without sacrifice comfortable ride.* A fast & affordable way to easily upgrade your car's appearance.* Easy installation with right tools.* Ideal for any track, drift & fast road & can also be used for daily driving. Notice- No instruction included; Professional installation & alignment suggested.- Please check your car information before purchase. If you are not sure, please contact us for help！- No drilling, cutting, or modification necessary.SPECIAL NOTES: Prior to installation, verify all hardware & properly tighten.



...