Introduction Looking to boost your car's power? Is your car's original turbocharger not performing well, or does it need replaced? Maxpeedingrods stocks all the best quality turbochargers, turbo parts to give your car the power, performance & reliability you deserve. Maxpeedingrods aftermarket replacement turbo provide the perfect solution by delivering a high-quality turbo at a budget-friendly price Application This item fits: Universal Application. Compatible for 1.5L to 2.5L any 4/6 cylinder engine Maximum PSI 19（1.3 Bar） Technology Advantage 1. 100% balancing Test by TURBOTECHNICSVSR3 This Turbocharger you will receive has been balanced using the VSR machine technology. Through the comprehensive & high-precision static & dynamic balance detection technology, & reliability.2. G3-min-Flow VNT Turbo testing The G3-min-Flow (Air) machine can accurately measure the flow through the VGT turbo & verify that it is set to the OEM factory setting. easily adjust the critical minimum-flow stop to the correct setting before the turbocharger leaves workshop.3. Advanced Actuator Tester/ Programmer Electronic actuator diagnostic with G3-rea-master can rewrite memory in electronic actuators & also allows to modify operation range of the actuator arm, that

Includes:: changing open & close positions of the working angle. Specification Bearing: Floating Bearing Exhaust (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns Exhaust (Downpipe) Flange: Standard T3 5 bolt downpipe flange pattern Cooling Type: Oil Cooled Internal Wastegate: No Compressor Trim: 48.1 Compressor A/R: 0.5 Compressor Inducer: 52.7mm Compressor Exducer: 76mm Turbine Trim: 74.2 Turbine A/R: 0.57 Turbine Inducer: 64.8mm Turbine Exducer: 55.8mm Turbine exhaust inlet：45mm/87mm Compressor outlet：42mm (inside diameter)、52mm (outer diameter) Compressor inlet：68 mm (inside diameter)、77mm (outer diameter) Hosepower: Up to 400+HPCondition: New Package
Size:26x 25x 23 cm Package Weight: 7250g Note* Replace, repair or reconnect air cleaner element per manufacturer's manual to avoid compressor wheel damage.* Make sure the oil drain line is lower than the turbo itself.* Gasoline car must install a water cooling device to avoid overheating.* Ensure exhaust outlet are well sealed by welding.* Professional Installation is Highly Recommended.* Additional parts will be needed for a complete installation. Please consult professional turbo installer for details.* Does NOT have a internal wastegate so you must have a external wastegate on your manifold. Features- Turbine housing： Ductile iron QT450-10 shell with high-temperature resistance up to 700 degrees Celsius.- Steel Turbine Wheel： Made from the special K418 alloy to achieve high oxidation resistance & stability under high temperatures up to 900 degrees Celsius.- Compressor housing：ZL104 aluminum. Compressor wheel/blades: Cast Aluminium with good gas tightness & corrosion resistance.
- 100% BALANCING TEST, This Turbocharger you will receive has been balanced using the VSR machine technology. Through the comprehensive & high-precision static & dynamic balance detection technology, & reliability.- High Quality Material.- Boost Engine Horsepower Significantly.- Increase Engine Power & Torque Outpout.- Maintain Combustion Chamber Pressure & Fuel/ Air Load.- Built for Durability & Strength. Warranty: one year warranty for any manufacturing defect



...

Introduction Looking to boost your car's power? Is your car's original turbocharger not performing well, or does it need replaced? Maxpeedingrods stocks all the best quality turbochargers, turbo parts to give your car the power, performance & reliability you deserve. Maxpeedingrods aftermarket replacement turbo provide the perfect solution by delivering a high-quality turbo at a budget-friendly price Application This item fits: Universal Application. Compatible for 1.5L to 2.5L any 4/6 cylinder engine Maximum PSI 19（1.3 Bar） Technology Advantage 1. 100% balancing Test by TURBOTECHNICSVSR3 This Turbocharger you will receive has been balanced using the VSR machine technology. Through the comprehensive & high-precision static & dynamic balance detection technology, & reliability.2. G3-min-Flow VNT Turbo testing The G3-min-Flow (Air) machine can accurately measure the flow through the VGT turbo & verify that it is set to the OEM factory setting. easily adjust the critical minimum-flow st... ...

T04E Turbocharger with Internal Wastegate Exhaust (Turbo Manifold) Flange: Standard T3/ T4 4-Bolt Exhaust (Downpipe) Flange: Standard 2.50" Inner Diameter V-Band Intake Inlet/ Outlet:3.00"/ 2.00" Compressor: Trim:44 Inducer Diameter:50.5 mm Exducer Diameter:76 mm A/R:0.5 Turbine Trim:73 Inducer Diameter:65.5 mm Exducer Diameter:55.9 mm A/R:0.63 Oil Inlet: M12*1.25 2*M8*1.25 Oil Outlet: 2*M8*1.252.5" Universal Aluminum Intercooler Pipe-Made out of high quality of 6061 aluminum Manual polishing finished-Manufactured from high quality aluminum for durable use:-Straight Layout & Appropriate Pipes' Radius lead to less pressure loss-High Pressure Resistant Hoses bring out high performance of intercooler-All pipes are well externally polished-All intercoolers are bar plate design for better cooling efficiency-Professional Installation Is Highly Recommended-Pipe Thickness: 1.8mm-Pipe length: 18"27x 7x 2.5 2.5" Universal Intercooler-Inlet/outlet

Size: 2.5"-Core

Size: 21"x 7"x 2.5"-Full

Size: 27.00" (L) X 7.00" (H) X 2.50" (W)-Compress Air Flow Rate 350 Cubic Feet/ Min, Rated up to 500 Max HP-Pressure drop: 2~5psiat 35psi, 0.2~0.5psiat 15psi-
Material: Aluminum alloy-Core design: Tube Fin Package include 1x T04E V-Band Turbocharger 1x 27x 7x 2.5 2.5" Universal Intercooler 2x 90 Degree Aluminum Pipe 2.5"2x Straight aluminum pipe 2.5"2x 135 Degree Aluminum Pipe×2 2.5"2x U Aluminum Pipe×2 2.5"6x Straight Silicon Hose 2.5" (Blue )2x 90 Degree Silicone Hose×2 2.5" (Blue )16x Clamps 2.5" Specification Condition: New Bearing Type: Floating Bearing Warranty: one year Accessories: You will get exactly as shown in the picture above Notice* Professional installation is highly recommended (No Instruction Included).* For any needs please contact us.* Replace, repair or reconnect air cleaner element per manufacturer's manual to avoid compressor wheel damage.* Make sure the oil drain line is lower than the turbo itself.* Gasoline car must install a water cooling device to avoid overheating.* Ensure exhaust outlet are well sealed by welding.






...

T70. 70 A/R Turbocharger Up to 500HP+ Oil Feed Line+ Turbo Oil Drain Return Complete Kits 1. About T70 Turbo Application for : Universal for Turbo Manifold with T3 Flange. Perfect for all 2.0L-3.0L engines. Compressor
Size: * Trim: 57 * Inducer Diameter: 56.6 mm * Exducer Diameter: 75 mm * A/R: 0.7 Turbine
Size: * Exhaust Inlet Flange: T3 Twin Scroll Flange * Exhaust Outlet Flange: 2.5 V Band Flange * Turbine exhaust outlet: 79.8 mm (OD)/ 63 mm (ID) * Trim: 61.6 * Inducer Diameter: 74.4 mm * Exducer Diameter: 58.4 mm * A/R: 0.7 Cooling Type: Oil Cooled Horse Power:up to 500HP Bearing Type: Floating Bearing Thrust Bearing: 270 Degrees Turbo Type: Twin-Scroll Oil Inlet: M12*1.25 & 2*M8*1.25 Oil Outlet:2*M8*1.25 Wastegate: W/O Wastegate Condition: 100% Brand New Accessories: You will get exactly as shown in the picture above Package

Size: 25*24*23cm Package Weight: 9560g 2. About Oil Feed Line+ Turbo Oil Drain Return Complete Kits Fit For Most Turbos...



...

Application Perfect for all 1.8L-3.0L engines Horse Power: Boost Horse Power up to 600HPCooling Type: Oil Cooled Specification Exhaust Inlet (Turbo Manifold) Flange: Standard T3 Flange Exhaust Outlet (Downpipe) Flange: V-Band Flange Turbine Trim: 62 Turbine Inducer Diameter:74.4 mm Turbine Exducer Diameter: 58.4 mm Turbine A/R: 0.7 Compressor Trim: 57 Compressor Inducer Diameter: 56.6 mm Compressor Exducer Diameter: 75 mm Compressor A/R: 0.7 Oil Inlet: M12*1.25 2*M8*1.25 Oil Outlet: 2*M8*1.25 Bearing: Journal Bearing Warranty: one year Internal Wastegate: NO* OIL RETURN LINE: Length: 550mm Inner Diameter: 21mm​* OIL FEED LINE: Length: 1000mm Inner Diameter: 14mm* Notes: This is a universal oil line kit. Not all the component parts will be directly bolt on your car. You may still need some accessaries of your OEM oil line kit. Notice* Please check the specifications carefully before placing orders. If you are not sure about these information, please feel free to contact us.* This is universal appli... ...

Pneumatic hand held impact driven tool Application For ATV, Heavy Duty/ Commercial, Motorcycle, Passenger Vehicle Specification Condition: New Set or Single Item: Single Item Warranty: one year Type: Tire Demount Tool Feature It is safe, easy, light, fast & economical, designed for universal tire demount tool. This unit works as a h&-held tire machine & makes your job a lot easier. Notice Please feel free to contact us for whatever we can help. ...

Application Universal Application.for 1.5L to 2.5L any 4/6 cylinder engine Specification Turbine: Turbine Intake Flange: T3 T4 4 bolt Flange Patterns Turbine Exhaust Flange: Standard T3 5 bolt flange pattern Turbine Trim: 74.2 Turbine A/R: 0.63 Turbine Inducer: 64.8mm Turbine Exducer: 55.8mm Turbine exhaust inlet：44.5mm/81mm Compressor: Compressor Trim: 48.1 Compressor A/R: 0.5 Compressor Inducer: 52.7mm Compressor Exducer: 76mm Compressor outlet：45mm (inside diameter)/53mm (outer diameter) Compressor inlet：68 mm (inside diameter)/72mm (outer diameter) Oil Inlet: M12*1.25 Oil Outlet:2*M8*1.25 Wastegate： Without Wastegate Cooling Type: Oil Cooled Bearing Type: Floating Bearing Trust Bearing: 270 degree Hosepower: Up to 400+HPTurbo Type: Individual Universal Fitment: Yes Finish: Matte Condition: 100% Brand New Accessories: You will get exactly as shown as picture above Package
Size:27x 25x 23 cm Package Weight: 7220g Package included 1x Turbocharger 1x Flange gasket 2x Oil port gaskets 1x Manual 1x Brochure 1x Sticker Feature* Product Material 1. Turbine housing ： Silicon-Molybdenum
- temperature resistant up to 850℃2. Steel Turbine Wheel：K419 alloy
- high oxidation stability & resistanceupto 1000℃3. Compressor housing：ZL104 aluminum with lightweight 4. Billet compressor wheel：forged full-machined billet aluminum compressor wheels with a larger horsepower range & better boost response* Product Performance 1. Increase 20-40% power for your car 2. Excellent high temperature resistance，high efficiency & durability 3. Rich experience in turbo production & own factory 4. High-Speed oil seal ring & Precision clearance* Technology Advantage: 1. 100% balancing Test by TURBOTECHNICSVSR32. G3-min-Flow VNT Turbo testing 3. Advanced Actuator Tester/ Programmer Note* Replace, repair or reconnect air cleaner element per manufacturer's manual to avoid compressor wheel damage.* Make sure the oil drain line is lower than the turbo itself.* Ensure exhaust outlet are well sealed by welding* The degree of modification of the universal turbo depends on your individual vehicle.* Professional installation is highly recommended.* This Turbo is not vehicle specific. Please check the specifications & verify compatibility prior to placing your order.* Before installing the new turbocharger, the cause that led to the failure of the turbo must be analyzed & eliminated (e.g. insufficient oil supply, foreign bodies in the intake area, crankcase ventilation without function, etc.)! Warranty: one year warranty for any manufacturing defect


...

Application Universal Application.for 1.5L to 2.5L any 4/6 cylinder engine Specification Turbine: Turbine Intake Flange: T3 T4 4 bolt Flange Patterns Turbine Exhaust Flange: Standard T3 5 bolt flange pattern Turbine Trim: 74.2 Turbine A/R: 0.63 Turbine Inducer: 64.8mm Turbine Exducer: 55.8mm Turbine exhaust inlet：44.5mm/81mm Compressor: Compressor Trim: 48.1 Compressor A/R: 0.5 Compressor Inducer: 52.7mm Compressor Exducer: 76mm Compressor outlet：45mm (inside diameter)/53mm (outer diameter) Compressor inlet：68 mm (inside diameter)/72mm (outer diameter) Oil Inlet: M12*1.25 Oil Outlet:2*M8*1.25 Wastegate： Without Wastegate Cooling Type: Oil Cooled Bearing Type: Floating Bearing Trust Bearing: 270 degree Hosepower: Up to 400+HPTurbo Type: Individual Universal Fitment: Yes Finish: Matte Condition: 100% Brand New Accessories: You will get exactly as shown as picture above Package
Size:27x 25x 23 cm Package Weight: 7220g Package included 1x Turbocharger 1x Flange gasket 2x Oil port gaskets 1x Manual 1x Brochure 1x Sticker Feature* Product...
...

Application For 2-4 Cylinders Small Engine for GT15 T15OE/ Part number 452213-0001, 452098-0004 Specification Turbine Inducer Diameter: 41.35mm Turbine Exducer Diameter: 34.95mm Compressor Inducer Diameter:49mm Compressor Exducer Diameter:36.4mm Condition: 100% Brand New Accessories: You will get what you can see in the pictures exactly Package

Size: 15*15*15CM Package Weight: 1140g

...

Intorduction Intercooler exchange device used on turbocharged & supercharged internal combustion engines to improve their volumetric efficiency by increasing intake air charge density through nearly isobaric cooling, which removes the heat of compression that occurs in any gas when its pressure is raised or its unit mass per unit volume is increased. Applaction Universal Specification Specifications of Intercooler: Inlet / Outlet

Size: 2.5" Core

Size: 21'' x 7'' x 2.5'' Full

Size: 27.00" (L) X 7.00" (H) X 2.50" (W) Core design: Tube Fin
Material: Aluminum alloy Compress Air Flow Rate 350 Cubic Feet/ Min, Rated up to 500 Max HPPressure drop:2~5psiat 35psi, 0.2~0.5psiat 15psi Warranty:1 Year Condition: 100% Brand New Specifications of Pipe Kit: Applications: Universal fits all Turbo Projects Pipe Thickness: 1.8mm--Durable quality size Diameter: 2.5'' Pipe Length: 18'' Pipe Thickness: 1.8mm
Material:6061 Aluminum Package Including 1 x Intercooler 2 x 90 Degree Aluminum Pipe 2.5"2 x Straight Aluminum Pipe 2.5"2 x 135 D...







...