Application Compatible for Honda Accord VIII LX, SE, LX-P sedan CP2 2008-2012 Compatible for Honda Accord VIII LX, SE, LX-P sedan CP3 2008-2012 Compatible for Honda Accord VIII LX, SE, LX-P coupe CS1 (north American only) 2008-2012 Compatible for Honda Accord VIII LX, SE, LX-P CS2 (north American only) 2008-2012 Compatible for Honda Accord VIII LX, SE, LX-P sedan CU1 CU2 CU3 2008-2015 Compatible for Honda Accord VIII Tourer 5-door wagon CW1 2008-2015 Compatible for Acura TSX (North America) 2009-2015 Compatible for Accord Euro （ Australia & New Zealand）2008.6-2015.7 Specification Product included: Complete coilovers 2 front & 2 rear as shown in the picture Adjustable
Height:YESDamper: Non adjustable Damper Force Adjustable Camber Plate:NOFront & Rear upper Mounts: Rubber Front Spring Rate:10 kg/mm (560 in/lbs) Rear Spring Rate:7 kg/mm (392 in/lbs) Spring Preload: 7-10 mm Drop Height Front: 1-3in Drop Height Rear: 1-3in Shock type： Twin tube Color： Red Warranty: one year Feature- Able to lower ride height by 1''-3''; allows user to have a more aggressive stance.- Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response.- The user can enjoy a comfortable riding experience in all road conditions.- Twin-Tube Shock design is used for low internal frictional resistance in order to increase efficiency & keep shock temps low.- Height adjustment does not sacrifice damper stroke length.- These coilovers are able to have their height adjusted without being taken out of the car.- Most components of the suspension parts are made from 6061-T6 aluminum to increase strength & rigidity.- High Tensile strength performance spring---Tested under a 600, 000 time continuous compression test, the spring distortion was less than 0.04%. Plus, the special surface treatment improves the durability & performance.- Adjustment tools included in the kit. Note- Professional installation is highly recommended.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.
...

Introduction MXR-SNA coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application Compatible for MITSUBISHI ECLIPSE 1995-1999USA D38A CONVERTIBLE, 4CYL/TURBO compatible for MITSUBISHI ECLIPSE 1995-1999USA D33A 4CYL/TURBO compatible for MITSUBISHI ECLIPSE 1995-1999USA D32A 4CYL/TURBO compatible for MITSUBISHI ECLIPSE 1995-1999USA D31A4CYL/NON TURBOSpecification Top mount: front camber plate; rear rubber Front Spring Rate:12kg/mm (672 lbs/in) Rear Spring Rate: 9kg/mm (504lbs/in) Spring length Front: 190mm Spring length Rear: 190mm Coilover overall length Front: 445mm-495mm Coilover overall length Rear: 485mm-575mm Adjustable

Height: Yes lowering 1" to 3" Spring Preload: 7-10 mm Shock type： Twin tube
Colour: goldbody with black spring Package included Complete coilovers assembly 2 front & 2 rear A pa...


...

Introduction MXR-B2 series (also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application Compatible for MITSUBISHI ECLIPSE 1995-1999USA D38A CONVERTIBLE, 4CYL/TURBO Compatible for MITSUBISHI ECLIPSE 1995-1999USA D33A 4CYL/TURBO Compatible for MITSUBISHI ECLIPSE 1995-1999USA D32A 4CYL/TURBO Compatible for MITSUBISHI ECLIPSE 1995-1999USA D31A4CYL/NON TURBO Specification Top mount: front camber plate; rear rubber Front Spring Rate:12kg/mm (672 lbs/in) Rear Spring Rate: 9kg/mm (504lbs/in) Spring length Front: 190mm Spring length Rear: 190mm Coilover overall length Front: 445mm-495mm Coilover overall length Rear: 485mm-575mm Adjustable

Height: Yes lowering 1" to 3" Spring Preload: 7-10 mm Shock type： Twin tube
Colour: blue body with black spring Package included Complete coilovers assembly 2 front & 2 rear A pair wrench for height adjustment Dimension Package dimension: 63*51*21 Weight: 25560g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2. Camber plate top mounts help to eliminate the need for a separate camber kit. 3. Twin-Tube structure allows sufficient stroke within the shock absorber. 4. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. 5. Separate height adjustment does not affect damper stroke & height can be adjusted with coilovers installed on the vehicle. 6. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 7. Most pieces in our coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 8. Steel shock bodies with special surface treatment to improve the durability. 9. Full rebuildable Warranty: one year warranty for any manufacturing defect




...

Introduction Ma Xpeeding Rods-B2 series (also called Ma Xpeeding Rods-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application Compatible for MITSUBISHI ECLIPSE 1995-1999USA D38A CONVERTIBLE, 4CYL/TURBO Compatible for MITSUBISHI ECLIPSE 1995-1999USA D33A 4CYL/TURBO Compatible for MITSUBISHI ECLIPSE 1995-1999USA D32A 4CYL/TURBO Compatible for MITSUBISHI ECLIPSE 1995-1999USA D31A4CYL/NON TURBO Specification Top mount: front camber plate; rear rubber Front Spring Rate:12kg/mm (672 lbs/in) Rear Spring Rate: 9kg/mm (504lbs/in) Spring length Front: 190mm Spring length Rear: 190mm Coilover overall length Front: 445mm-495mm Coilover overall length Rear: 485mm-575mm Adjustable

Height: Yes lowering 1" to 3" Spring Preload: 7-10 mm Shock type： Twin tube
Colour: blue body with black spring Package includ...


...

Applicationfor 1988
- 1999 compatible for Chevy/GMCK1500 4WD for 1988
- 1999 compatible for Chevy/GMC C1500 RWDSpecificationproduct

...

Introduction A carburetor is a device to mix air & fuel for internal combustion engines in the proper ratio for combustion. Mixes air & gas before the fuel mix goes to the engine, help to keep your outdoor power equipment running at peak performance. Perfect choice to replace your defective carb assembly. Therefore, to make sure the proper engine function & have a nice driving experience, a good quality carburetor is highly recommended. Maxpeedingrods provides good quality carburetor compatible for Ford & compatible for Jeep series at a most competitive price. Application Part Number: 2100 A800, 2100-A800, 2100A800 Compatible for Jeep Wagoneer 1964~1978 Engine 360 Cu Compatible for Ford Mustang 1968~1973 Engine 289 Cu, 302 Cu, 351 Cu Compatible for Ford F100 1964~1978 Engine 289 Cu, 302 Cu, 351 Cu Compatible for Ford F150 1964~1978 Engine 289 Cu, 302 Cu, 351 Cu Compatible for Ford F250 1964~1978 Engine 289 Cu, 302 Cu, 351 Cu Compatible for Ford F350 1964~1979 Engine 289 Cu, 302 Cu, 35... ...

Application Compatible for Ford 1996-2003 4.6L, 5.4L, & 6.8V-10 two valve engines （all other engines will not fit, please check before purchasing.） Vehicle models are for reference only, as follows compatible for Ford Triton two valve models below： Engine 4.6 SOHC 2V for F150 2009*38900 2V's only for F250 1997-1999 for E150 1997-2014 for E250 1998-2014 Compatible for Expedition 1997-2004 Compatible for Explorer 2002-2005 Compatible for Crown Victoria 1992-2011 compatible for Mustang 1996-2004 Excludes Cobra compatible for Lincoln Town Car 1991-2011 compatible for Mercury Grand Marquis 1992-2011 compatible for Mercury Cougar XR7 1994-1997 compatible for Mercury Mountaineer 2002-2005 Engine 5.4 SOHC 2V for F150 1997-2003 for F150 2004*38900 2V's only for F250 & F350 1997-2004 for E150/ Compatible for E-Series 1996-2016 Compatible for Expedition 1996-2004 for Excursion 2000-2005 compatible for Lincoln Navigator 1998-1999*38900 2V's only Engine 6.8 SOHC 2V for F250-550 for F53 1997-20... ...

Introduction 2-piece ladder bracket set. Maximum load capacity is 440lbs. Application The ladder bracket is suitable for use on platforms up to 20 inches in width, & can be applied to painting siding, window repairs, general repairs & more. Feature HIGH QUALITY: The ladder bracket is made from alloy steel, using riveting & welding technology to make the structure more stable, durable & not easy to deform. SAFETY: The 20 inch wide platform meets OSHA requirements, the safety screws make the connection between the bracket & the ladder tighter to prevent loosening & falling off, & the left & right groove design greatly improves the stability of the ladder bracket, so that you can work with complete confidence. ADJUSTABLE DESIGN: The ladder bracket can be adjusted form different ladders for a better fit. It is very easy to set up & take down, which can improve your working efficiency. ...

Specification Condition:100% Brand New Fitment Type: Direct Replacement Three hole in a row Hole diameter: 25mm Center distance: 88mm Span: 90mm M14 Alignment Package included 1* Universal Hydraulic Thumb Clip 2* Hydraulic Hoses (Showing as the picture) Feature* High-manganese Steel * Abrasion-resistant * High hardness * No deformation * High quality Metal & constructed for Anti-rust & Anti-corrosion. * Fully tested under extreme condition for stable performance & long time use. Note* Only for 3-hole arm. If it is porous (three holes in a row) on the arm of QH12, model TYPH-2008 will work for it, not TYPH- 2008P. If it is single hole (one hole in a row) on the arm, TYPH- 2008P will work. * Please note the L shape bracket on this thumb clip may not compatible with the following excavator models：AGT L12, DIGGIT EM15. Please check the diamensions showing in the picture & compare. * Please confirm the connection size carefully before purchase, only the attachment connection size is same wit... ...

Application For TYPH-1801, TYPH-1802, QH12 excavators. Fit for Most compatible for Mini Excavators within 2 tons.OE/ Part number TYPH- 2008 P Specification Condition:100% Brand New Fitment Type: Direct Replacement One hole in a row - Type: Hydraulic Thumb Clip - Thumb Length ：560 mm -Hydraulic Hose Size：M14x 1.5 -Mounting Screw Length:8.3 in. (210 mm) -Mounting Hole Spacing: 3.6 in. (92 mm) -Mounting Screw

Size: M15x 1.5 -Mounting Screw Diameter: 1 in. (25 mm) Package included 1* Universal Hydraulic Thumb Clip 2* Hydraulic Hoses (Showing as the picture) Feature* High-manganese Steel * Abrasion-resistant * High hardness * No deformation *  High quality Metal & constructed for Anti-rust & Anti-corrosion. * Fully tested under extreme condition for stable performance & long time use. Note* Only for 1-hole arm. If it is single hole (one hole in a row) on the arm, TYPH- 2008P will work. If it is porous (three holes in a row) on the arm of QH12, model TYPH-2008 will work for it, not TYPH- 2008P. * This m...

...