Application Compatible for 1.5L to 2.5L any 4/6 cylinder engine Maximum PSI 18（1.2 Bar） Specification Exhaust (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns Exhaust (Downpipe) Flange: V-Band Flange Cooling Type: Oil Cooled Wastegate: Internal Wastegate Horse Power: Boost Horse Power up to 420HPCompressor: Trim:44 Inducer Diameter:50.5 mm Exducer Diameter:76 mm A/R:0.5 Turbine: Trim:73 Inducer Diameter:65.5 mm Exducer Diameter:55.9 mm A/R:0.63 Oil Inlet: M12*1.25 2*M8*1.25 Oil Outlet: 2*M8*1.25 Package
Includes::1x T3/T4 T04E V-band Turbocharger 1x Type-RS Blow Off Valve Kit 1x Type-RS 2.5" Aluminum Flange Pipe Adapter (You will get exactly as shown in the picture above) Condition: New Bearing Type: Floating Bearing Warranty: one year Accessories: You will get exactly as shown in the picture above About Blow Off Valve Blow Off Valve: Holds Up to 30PSI Boost Pressure Easy Assembly, Aluminum Flange, CNC Machined Billet Aluminum Body Dual Spring System Promoted Response Allows for High Boost Pressures Hard-Anodized Valve for Increased Air Flow Powder-Coated Anodized & Polished Finish 2 Bolts Mounting Design Flange Pipe Adapter:2.50" (63mm) Pipe Size Fits Type-S or Type-RS Dump Pipe Flange Oval / 2 Bolt Flange Design type Condition: New Warranty: one year warranty for any manufacturing defect Notice* Professional installation is highly recommended (No Instruction Included).* For any needs please contact us.* Replace, repair or reconnect air cleaner element per manufacturer's manual to avoid compressor wheel damage.* Make sure the oil drain line is lower than the turbo itself.* Gasoline car must install a water cooling device to avoid overheating.* Ensure exhaust outlet are well sealed by welding.
...

Application： Compatible for BMW E36 325i / 325is i 6 1991-1995 Compatible for BMW E36 328i / 328is i 6 1994-1999 Compatible for BMW E36 323i i 6 1995-1999 Compatible for BMW E36 M3 i 6 1992-1999 Compatible for BMW E46 323i / 323is / 323 Ci / 323 Ti i 6 1997-2000 Compatible for BMW E46 328i / 328 Ci i 6 1998-2000 Compatible for BMW E46 325i / 325 Ci / 325 Xi / 325 Ti i 6 2001-2007 Compatible for BMW E46 330i / 330 Ci / 330 Xi i 6 2000-2007 Note: This is universal application turbo, so modification might be required for some vehicles.   Product Specific： 1 x T3/T4 Turbo Charger: Compressor Inlet Diameter: 72mm (2.8") Compressor Outlet Diameter:  53mm（2"） Oil Inlet: 1/8 NPT Exhaust Inlet (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns Exhaust Outlet (Turbo Pipe) Flange: 5 bolt Flange Turbine Trim: 74.2 Turbine Inducer Diameter:  64.8 mm Turbine Exducer Diameter: 55.8mm Turbine A/R: 0.63 Compressor Trim: 48.1 Compressor Inducer Diameter: 52.7mm Compressor Exducer Diameter: 76 mm Compressor A/R: 0.5 Bearing: Wet Float Bearing Turbocharger Overall

Size: 270*220*220 1 x Intercooler: * Size 27'' x 7'' x 2.5'' inch. Inlet size is 2.5 inch. * Support up to 350 hp for this small intercooler size
- tube & fin style. * Intercooler core
Size:  21*7*2.5 1 x Universal turbo intercooler piping kit:   Straight Aluminum Pipe *2 45° Aluminum Pipe * 2 75° Aluminum Pipe * 2 90° Aluminum Pipe * 2 2.5" Straight Silicon Hose (Blue) * 6 2.5" 90 Degree Hose (Blue) * 2 2.5" Stainless Steel T-Clamp * 16 1 x Type-S Blow Off Valve: CNC Billet Aluminum Type RS Style Blow off Valve & 2.5" Inch Type S/ Rs Flange Pipe.   25 P Si Boost! Can hold up to 1000+ HP. 1 x BOV pipe: can be installed anywhere suitable 1 x  35/38MM Wastegate: 35/38mm External Waste Gate Kit 1 x Turbo Boost Controller: Up To 30 PSi Boost 1 x Turbo Oil Return / Feeding Line Kit: Turbo Oil Feed + Return Drain Line Kit Combo. It helps circulate oil from the turbo charger to the oil pan. The kit provides a anodized look, & gives a best cooling performance on your turbo & long lasting life.
Material: Stainless Steel Braided 1 x 5 Blot Turbo Pipe: 2.5" t 3/t 4 5-bolt stainless steel TIG welded turbo pipe. Pipe length: 13" Fits all of our turbo kits that feature a turbocharger with a 5-bolt exhaust housing. This provides a simple starter solution for connecting your turbo's exhaust to your existing exhaust system. 1 x INTAKE FILTER:
Width: 6" Inlet: 3.0" Overall Tall: 3.5" Mesh Tall: 2.5"   Condition:   New Warranty：one year Accessories: You will get exactly as shown in the picture above   Package included: 1x T3/T4 Turbocharger 1x Oil Feed / Return Line 1x 35/38mm Wastegate 1x 5 Bolt Turbo Pipe 1x Turbo Intercooler 1x Tubo Boost Controller 1x Type-S Blow Off Valve (Random Color) 1x BOV Adapter/pipe 1x Turbo Piping Kit 1x Air filter   Note: * Need modifications
- Professionals ONLY (This is an aftermarket universal turbo kit for DIY purpose, & it's recommended to advanced players but not for beginners. )  * we will not be responsible for man-made installation damage.  






...

Application For Turbo Blanket:T4 for GT40 GT42 GT45 Turbocharger Heat Shield Blanket Specification Package Included: 1X Heat shield blanket 2X Locking Springs 1X Fiberglass Heat Wrap Tape 10X Stainless Steel Zip Ties Condition: New Accessories: You will get exactly as shown in the picture above Notice* Please confirm your old part number matches up with one of the part numbers above * Professional installation is highly recommended (No Instruction Included) * For any needs please contact us. ...

Introduction Ma Xpeeding Rods T6 lowering coilover, standard with adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plate（for some vehicles), & decent outlook, offers you more ability to tune your suspension on performance & gives your vehicle more impressive appearance. Besides, all our coil-overs are assembled in a dust-free factory, which turns out good quality & long life. Application Compatible for Subaru Impreza incl. WRX (GC, GF, GFC) 1992.11-2000.08 fit chassis code: GC5, GC6, GC7, GC8/GF5, GF6, GF8 Specification Damping adjustable: Available, 24 ways damping force Shock structure type: Twin-tube Front top mount structure: Pillow ball with camber plate Rear top mount structure: Pillow ball Height adjustable: Yes, lowering 1-3 inches depending on the vehicle models Spring Rate Front: 10 kg/mm (560 lbs/in) Spring Rate Rear: 6 kg/mm (336 lbs/in) Front spring inner diameter: 70.5mm Rear spring in... ...

Application Universal for Turbo Manifold with T3 Flange. Perfect for all 2.0L-3.0L engines. * Notice:DO NOT for 3 INCH VB&. The vband size of this turbo is 2.5 inch. Please confirm the size before purchasing. Specification Compressor
Size: * Trim: 57 * Inducer Diameter: 56.6 mm * Exducer Diameter: 75 mm * A/R: 0.82 Turbine
Size: * Exhaust Inlet Flange: T3 Twin Scroll Flange * Exhaust Outlet Flange: 2.5"V Band Flange * Turbine exhaust outlet: 79.8 mm (OD) / 63 mm（ID） * Trim: 61.6 * Inducer Diameter: 74.4 mm * Exducer Diameter: 58.4 mm * A/R: 0.7 Oil Inlet: M12*1.25 & 2*M8*1.25 Oil Outlet: 2*M8*1.25 Cooling Type:  Oil Cooled Horse Power:  up to 500HP Wastegate： Without Wastegate Bearing Type:  Floating Bearing Thrust bearing: 270 Degrees Turbo Type: Twin-Scroll Universal Fitment: Yes Finish: Polished Condition: 100% Brand New Accessories: You will get exactly as shown in the picture above Package

Size: 25*24*23cm Package Weight: 9560g Package included 1x Turbocharger 1x Flange gaskets 2x Oil p...



...

T76 Turbo Turbocharger T4. 96 A/R Trim 500+ HP 76.6mm Compressor Application: Universal turbofor V6 V8 Cars Perfect fit for Above 3.0L Engines, 6/8 cylinder Specific: Compressor: Compressor Trim: 56.1 Compressor Inducer Diameter:76.6 Compressor Exducer Diameter:102.3 Compressor A/R:0.8 Air Outlet: 107mm Air Inlet: 130.9mm Turbine: Exhaust Inlet Flange: T4 Flange Exhaust Outlet Flange:V-Band (

Size: OD. 91.95mm & ID. 74.5mm ) Turbine Inducer Diameter: 73.5 Turbine Exducer Diameter: 64.3 Turbine Trim: 76.5 Turbine A/R:0.96 Oil Inlet: 1/8"-27 Oil Outlet: 2*M8*1.25 Bearing: Wet Float Cooling Type: Oil Cooled Wastegate:W/O Wastegate Turbo Type: Individual Thrust Bearing: 270 degree Horse Power: Boost Horse Power up to 500BHP Condition: 100% brand new Accessories: You will get exactly as shown in the picture above Package

Size: 29*27*24 cm Package Weight:10000 g
Features: * Product Material 1. Turbine housing: Ductile iron QT450-10
- temperature resistant up to 700℃ 2. Steel t...





...

Introduction Are you trying to put together a cost effective turbocharger system for your vehicle? You should know a turbocharged car has about 20-40% more total power than a non-turbo car of the same year, make & model. Well, Maxpeedingrods universal turbocharger got just what you're looking for. Don't hesitate to get a turbo to boost your car's power. Application Universal turbo for V6 V8 Cars， Perfect fit for Above 3.0L Engines, 6/8 cylinder Horse Power: Boost Horse Power up to 500BHPSpecification Exhaust Inlet (Turbo Manifold) Flange: T4 Flange Exhaust Outlet (Downpipe) Flange: V-Band Turbine Inducer Diameter: 73.5 Turbine Exducer Diameter: 64.3 Turbine Trim: 76.5 Turbine A/R: 0.96 Compressor Trim: 56.1 Compressor Inducer Diameter: 76.6 Compressor Exducer Diameter: 102.3 Oil Inlet: 1/4"-19 & M8 H Oil Outlet: 2*M8*1 Compressor A/R: 0.8 Compressor Air Inlet: 130.9mm Compressor Air Outlet: 107mm Inner diameter: 91.95mm Outer diameter: 74.5mm Bearing:  Wet Float Cooling Type:  Oil Cooled Warranty: one year for... ...

Fitment: Compatible for BMW X5 E70 2007-2013 Compatible for BMW X6 (E71) 2008-2014 Compatible for BMW X6 (E72) 2010-2011 Part Number: 7335274, 61357335274, 61357317419, 61357304626 Specification: Condition: Brand New & Good Quality Fitment Type: Direct Replacement Feature: 1. Correct Connector No cutting or splicing 2. Strict quality control standards to Build & test 3. Easy to install, direct fits 4. A perfect replacement for your original part ...

Applications Compatible for Jeep Grand Cherokee 2014-2020 Specifications Type: Inner & Outer Tail Light Bezel Interchange Part Number:68220970AA, 68220968AA, 68219813AA, 68219812AA
Colour: Black
Material: made from high quality plastic Package
Includes:: Set of 4 Tail Light Trim Bezel Kit Condition: New Warranty: one year warranty for any manufacturing defect Accessories: You will get exactly as shown in the picture above Note No instruction included; Professional installation & alignment suggested. Please check our store for other auto parts you may be interested in. Please feel free to contact us for whatever we can help.


...

Application To removeclamp dents in mufflers or tail pipes For exhaust system repair & installation Using Tips: Insert The Expander In The Damaged Pipe End, & Turn The Expanders Turning Bar Till The Dents Are Removed Specification Package
Includes:: 1x Small Expander: 1-1/8" to 1-3/4"1x Medium Expander: 1-1/2" to 2-1/2"1x Large Expander: 2-1/8" to 3-1/2"6x Extra O-Rings 1x Carry compatible for Case (As Picture Showed) Accessories: You will get exactly as shown in the picture above Condition: New Warranty: one year warranty for any manufacturing defect Notice- Please check our store for other auto parts you may be interested in.
- Please feel free to contact us for whatever we can help.-Box
Colour: The color of the box is random.


...