Applicationfor 2.5L & up enginesfor 3.2L-5.0L engines, capable to 800HPNote: Please confirm that your car's displacement is between 1.5-2.5L. Please check the size before purchasing & make sure that your car has enough space to install this turbo. Specification Exhaust (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns Exhaust (Downpipe) Flange: Standard T3 5 bolt downpipe flange pattern Cooling Type: Oil Cooled Maximum 18PSIWastegate: External Wastegate Horse Power: Boost Horse Power up to 300+HP Compressor: Trim: 55 Inducer Diameter: 50.5 mm Exducer Diameter: 76 mm A/R: 0.5 Turbine Trim: 73 Inducer Diameter: 65.5 mm Exducer Diameter: 55.9 mm A/R: 0.63 Oil Inlet: M12*1.25 Oil Outlet:2*M8*1.25 Blow Off Valve: Billet Aluminum Body 8 Discharge Ports That Draw In Surrounding Air & Release a Unique Discharge Sound 40mm, Hard-Anodized Valve for Increased Airflow Dual Spring System Promoted Response & Allows for High Boost Pressures Holds Up to 30 PSI Boost Pressure Aggressive for JDM Racing Dischar... ...

Application Compatible for 1.5L to 2.5L any 4/6 cylinder engine Maximum PSI 18（1.2 Bar） Specification Exhaust (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns Exhaust (Downpipe) Flange: V-Band Flange Cooling Type: Oil Cooled Wastegate: Internal Wastegate Horse Power: Boost Horse Power up to 420HPCompressor: Trim:44 Inducer Diameter:50.5 mm Exducer Diameter:76 mm A/R:0.5 Turbine: Trim:73 Inducer Diameter:65.5 mm Exducer Diameter:55.9 mm A/R:0.63 Oil Inlet: M12*1.25 2*M8*1.25 Oil Outlet: 2*M8*1.25 Package
Includes::1x T3/T4 T04E V-band Turbocharger 1x Type-RS Blow Off Valve Kit 1x Type-RS 2.5" Aluminum Flange Pipe Adapter (You will get exactly as shown in the picture above) Condition: New Bearing Type: Floating Bearing Warranty: one year Accessories: You will get exactly as shown in the picture above About Blow Off Valve Blow Off Valve: Holds Up to 30PSI Boost Pressure Easy Assembly, Aluminum Flange, CNC Machined Billet Aluminum Body Dual Spring System Promoted Response Allows for High Boost Pressures Hard-Anodized Valve for Increased Air Flow Powder-Coated Anodized & Polished Finish 2 Bolts Mounting Design Flange Pipe Adapter:2.50" (63mm) Pipe Size Fits Type-S or Type-RS Dump Pipe Flange Oval / 2 Bolt Flange Design type Condition: New Warranty: one year warranty for any manufacturing defect Notice* Professional installation is highly recommended (No Instruction Included).* For any needs please contact us.* Replace, repair or reconnect air cleaner element per manufacturer's manual to avoid compressor wheel damage.* Make sure the oil drain line is lower than the turbo itself.* Gasoline car must install a water cooling device to avoid overheating.* Ensure exhaust outlet are well sealed by welding.
...

Application： Compatible for BMW E36 325i / 325is i 6 1991-1995 Compatible for BMW E36 328i / 328is i 6 1994-1999 Compatible for BMW E36 323i i 6 1995-1999 Compatible for BMW E36 M3 i 6 1992-1999 Compatible for BMW E46 323i / 323is / 323 Ci / 323 Ti i 6 1997-2000 Compatible for BMW E46 328i / 328 Ci i 6 1998-2000 Compatible for BMW E46 325i / 325 Ci / 325 Xi / 325 Ti i 6 2001-2007 Compatible for BMW E46 330i / 330 Ci / 330 Xi i 6 2000-2007 Note: This is universal application turbo, so modification might be required for some vehicles.   Product Specific： 1 x T3/T4 Turbo Charger: Compressor Inlet Diameter: 72mm (2.8") Compressor Outlet Diameter:  53mm（2"） Oil Inlet: 1/8 NPT Exhaust Inlet (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns Exhaust Outlet (Turbo Pipe) Flange: 5 bolt Flange Turbine Trim: 74.2 Turbine Inducer Diameter:  64.8 mm Turbine Exducer Diameter: 55.8mm Turbine A/R: 0.63 Compressor Trim: 48.1 Compressor Inducer Diameter: 52.7mm Compressor Exducer Diameter: 76 mm Compressor A/R: 0.5 Bearing: Wet Float Bearing Turbocharger Overall

Size: 270*220*220 1 x Intercooler: * Size 27'' x 7'' x 2.5'' inch. Inlet size is 2.5 inch. * Support up to 350 hp for this small intercooler size
- tube & fin style. * Intercooler core
Size:  21*7*2.5 1 x Universal turbo intercooler piping kit:   Straight Aluminum Pipe *2 45° Aluminum Pipe * 2 75° Aluminum Pipe * 2 90° Aluminum Pipe * 2 2.5" Straight Silicon Hose (Blue) * 6 2.5" 90 Degree Hose (Blue) * 2 2.5" Stainless Steel T-Clamp * 16 1 x Type-S Blow Off Valve: CNC Billet Aluminum Type RS Style Blow off Valve & 2.5" Inch Type S/ Rs Flange Pipe.   25 P Si Boost! Can hold up to 1000+ HP. 1 x BOV pipe: can be installed anywhere suitable 1 x  35/38MM Wastegate: 35/38mm External Waste Gate Kit 1 x Turbo Boost Controller: Up To 30 PSi Boost 1 x Turbo Oil Return / Feeding Line Kit: Turbo Oil Feed + Return Drain Line Kit Combo. It helps circulate oil from the turbo charger to the oil pan. The kit provides a anodized look, & gives a best cooling performance on your turbo & long lasting life.
Material: Stainless Steel Braided 1 x 5 Blot Turbo Pipe: 2.5" t 3/t 4 5-bolt stainless steel TIG welded turbo pipe. Pipe length: 13" Fits all of our turbo kits that feature a turbocharger with a 5-bolt exhaust housing. This provides a simple starter solution for connecting your turbo's exhaust to your existing exhaust system. 1 x INTAKE FILTER:
Width: 6" Inlet: 3.0" Overall Tall: 3.5" Mesh Tall: 2.5"   Condition:   New Warranty：one year Accessories: You will get exactly as shown in the picture above   Package included: 1x T3/T4 Turbocharger 1x Oil Feed / Return Line 1x 35/38mm Wastegate 1x 5 Bolt Turbo Pipe 1x Turbo Intercooler 1x Tubo Boost Controller 1x Type-S Blow Off Valve (Random Color) 1x BOV Adapter/pipe 1x Turbo Piping Kit 1x Air filter   Note: * Need modifications
- Professionals ONLY (This is an aftermarket universal turbo kit for DIY purpose, & it's recommended to advanced players but not for beginners. )  * we will not be responsible for man-made installation damage.  






...

Application For Turbo Blanket:T4 for GT40 GT42 GT45 Turbocharger Heat Shield Blanket Specification Package Included: 1X Heat shield blanket 2X Locking Springs 1X Fiberglass Heat Wrap Tape 10X Stainless Steel Zip Ties Condition: New Accessories: You will get exactly as shown in the picture above Notice* Please confirm your old part number matches up with one of the part numbers above * Professional installation is highly recommended (No Instruction Included) * For any needs please contact us. ...

Introduction Ma Xpeeding Rods T6 lowering coilover, standard with adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plate（for some vehicles), & decent outlook, offers you more ability to tune your suspension on performance & gives your vehicle more impressive appearance. Besides, all our coil-overs are assembled in a dust-free factory, which turns out good quality & long life. Application Compatible for Subaru Impreza incl. WRX (GC, GF, GFC) 1992.11-2000.08 fit chassis code: GC5, GC6, GC7, GC8/GF5, GF6, GF8 Specification Damping adjustable: Available, 24 ways damping force Shock structure type: Twin-tube Front top mount structure: Pillow ball with camber plate Rear top mount structure: Pillow ball Height adjustable: Yes, lowering 1-3 inches depending on the vehicle models Spring Rate Front: 10 kg/mm (560 lbs/in) Spring Rate Rear: 6 kg/mm (336 lbs/in) Front spring inner diameter: 70.5mm Rear spring in... ...

Introduction Are you trying to put together a cost effective turbocharger system for your vehicle? You should know a turbocharged car has about 20-40% more total power than a non-turbo car of the same year, make & model. Well, Maxpeedingrods universal turbocharger got just what you're looking for. Don't hesitate to get a turbo to boost your car's power. Application Universal for Turbo Manifold with T3 Flange. Perfect for all 2.0L-3.0L engines. Horse Power: Boost Horse Power up to 600HPSpecification Cooling Type:  Oil Cooled Bearing Type:  Floating Bearing Thrust bearing: 270 Degrees Compressor
Size:* Trim: 57* Inducer Diameter: 56.6 mm* Exducer Diameter: 75 mm* A/R: 0.82 Turbine
Size:* Exhaust (Turbo Manifold) Flange: Standard T3 Flange* Exhaust (Downpipe) Flange: V Band Flange* Trim: 62* Inducer Diameter: 74.4 mm* Exducer Diameter: 58.4 mm* A/R: 0.7* Oil Inlet: M12*1.25 & 2*M8*1.25* Oil Outlet: 2*M8*1.25 * Flange: T3 Twin Scroll * Outlet: 2.5'' V band Features 1. Turbine housing： Ductile iron QT45...

...

T76 Turbo Turbocharger T4. 96 A/R Trim 500+ HP 76.6mm Compressor Application: Universal turbofor V6 V8 Cars Perfect fit for Above 3.0L Engines, 6/8 cylinder Specific: Compressor: Compressor Trim: 56.1 Compressor Inducer Diameter:76.6 Compressor Exducer Diameter:102.3 Compressor A/R:0.8 Air Outlet: 107mm Air Inlet: 130.9mm Turbine: Exhaust Inlet Flange: T4 Flange Exhaust Outlet Flange:V-Band (

Size: OD. 91.95mm & ID. 74.5mm ) Turbine Inducer Diameter: 73.5 Turbine Exducer Diameter: 64.3 Turbine Trim: 76.5 Turbine A/R:0.96 Oil Inlet: 1/8"-27 Oil Outlet: 2*M8*1.25 Bearing: Wet Float Cooling Type: Oil Cooled Wastegate:W/O Wastegate Turbo Type: Individual Thrust Bearing: 270 degree Horse Power: Boost Horse Power up to 500BHP Condition: 100% brand new Accessories: You will get exactly as shown in the picture above Package

Size: 29*27*24 cm Package Weight:10000 g
Features: * Product Material 1. Turbine housing: Ductile iron QT450-10
- temperature resistant up to 700℃ 2. Steel t...





...

Introduction Are you trying to put together a cost effective turbocharger system for your vehicle? You should know a turbocharged car has about 20-40% more total power than a non-turbo car of the same year, make & model. Well, Maxpeedingrods universal turbocharger got just what you're looking for. Don't hesitate to get a turbo to boost your car's power. Application Universal turbo for V6 V8 Cars， Perfect fit for Above 3.0L Engines, 6/8 cylinder Horse Power: Boost Horse Power up to 500BHPSpecification Exhaust Inlet (Turbo Manifold) Flange: T4 Flange Exhaust Outlet (Downpipe) Flange: V-Band Turbine Inducer Diameter: 73.5 Turbine Exducer Diameter: 64.3 Turbine Trim: 76.5 Turbine A/R: 0.96 Compressor Trim: 56.1 Compressor Inducer Diameter: 76.6 Compressor Exducer Diameter: 102.3 Oil Inlet: 1/4"-19 & M8 H Oil Outlet: 2*M8*1 Compressor A/R: 0.8 Compressor Air Inlet: 130.9mm Compressor Air Outlet: 107mm Inner diameter: 91.95mm Outer diameter: 74.5mm Bearing:  Wet Float Cooling Type:  Oil Cooled Warranty: one year for... ...

Fitment: Compatible for BMW X5 E70 2007-2013 Compatible for BMW X6 (E71) 2008-2014 Compatible for BMW X6 (E72) 2010-2011 Part Number: 7335274, 61357335274, 61357317419, 61357304626 Specification: Condition: Brand New & Good Quality Fitment Type: Direct Replacement Feature: 1. Correct Connector No cutting or splicing 2. Strict quality control standards to Build & test 3. Easy to install, direct fits 4. A perfect replacement for your original part ...

Applications Compatible for Jeep Grand Cherokee 2014-2020 Specifications Type: Inner & Outer Tail Light Bezel Interchange Part Number:68220970AA, 68220968AA, 68219813AA, 68219812AA
Colour: Black
Material: made from high quality plastic Package
Includes:: Set of 4 Tail Light Trim Bezel Kit Condition: New Warranty: one year warranty for any manufacturing defect Accessories: You will get exactly as shown in the picture above Note No instruction included; Professional installation & alignment suggested. Please check our store for other auto parts you may be interested in. Please feel free to contact us for whatever we can help.


...