Introduction MXR-SLC based on MXR-SNA coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application 2005-2014 compatible for Ford Mustang S-197 2005-2014 compatible for Ford Mustang GTS-197 Specification Top mount: Front camber plate Damping: 24 levels rebound damping adjustable Front spring rate: 8kg/mm (448 lbs/in) Rear spring rate: 6kg/mm (336 lbs/in) Adjustable

Height: lowering 1-3 inch Shock type: Twin tube Spring Preload: 7-10 mm
Colour: gold body with black spring Package included Front complete coilover assembly Rear springs & spring adjusters & shocks A pair of front drop links A pair wrench for height adjustment Dimension Package dimension: 71*51*21 Weight: 27400g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2. A 24 rebound damping adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. 3. Camber plate top mounts help to eliminate the need for a separate camber kit. 4. Twin-Tube structure allows sufficient stroke within the shock absorber. 5. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. 6. Separate height adjustment does not affect damper stroke & height can be adjusted with coilovers installed on the vehicle. 7. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 8. Most pieces in our coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 9. Steel shock bodies with special surface treatment to improve the durability. 10. Full rebuildable Note NOT compatible for Shelby for GT500 Models




...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket adjustable coilovers suspension kit compatible for Honda CRV series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for HONDA CRV CR-V 2007-2011 Specification Quantity: 2 pieces front + 2 pieces rear Spring rate Front: 6kg/mm (336 lbs/in) Spring rate Rear: 8kg/mm (448 lbs/in) Adjustable Damper: 24 ways adjustable damper force Adjustable

Height: Yes Adjustable camber plate: No
Colour: Golden Warranty: one year warranty for any manufacturing defect Feature- Adjustable ride height- Adjustable pre-load spring tension- Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response- All inserts come with fitted rubber boots to protect the damper & keep clean.- Improve your handling performance without sacrifice comfortable ride.-A fast & affordable way to easily upgrade your car's appearance.- Easy installation with right tools.- Ideal for any track, drift & fast road & can also be used for daily driving.-Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down. -Hi tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance. Notice- No instruction included; Professional installation is highly recommended.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.




...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket adjustable coilovers suspension kit compatible for Honda CRV series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for HONDA CRV CR-V 2007-2011 Specification Quantity: 2 pieces front + 2 pieces rear Spring rate Front: 6kg/mm (336 lbs/in) Spring rate Rear: 8kg/mm (448 lbs/in) Adjustable Damper: 24 ways adjustable damper force Adjustable

Height: Yes Adjustable camber plate: No
Colour: Golden Warranty: one year warranty for any manufacturing defect Feature- Adjustable ride height- Adjustable pre-load spring tension- Pillow ball top mount -- this design...



...

100%, Never Used or Installed Twin-Cylinder Design
- Allows Sufficient Stroke Within The Shock Absorber. Front camber plates
...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket height adjustable coilovers suspension kit compatible for Toyota Celica series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Toyota Celica GT GTS FWD 1990-1993 Compatible for Toyota Celica FWD 1994-1999 Specification Quantity: 2 pieces front + 2 pieces rear Spring rate Front: 10kg/mm (556 lbs/in) Spring rate Rear: 6kg/mm (336 lbs/in) Adjustable Damper: Non adjustable Damper Adjustable

Height: Yes
Colour: Golden Warranty: one year warranty for any manufacturing defect Features- Able to lower ride height by 1''-3''; allows user to have a more aggressive stance.- The user can enjoy a comfortable riding experience in all road conditions.- Twin-Tube Shock design is used for low internal frictional resistance in order to increase efficiency & keep shock temps low.- Height adjustment does not sacrifice damper stroke length.- These coilovers are able to have their height adjusted without being taken out of the car.- High Tensile strength performance spring---Tested under a 600, 000 time continuous compression test, the spring distortion was less than 0.04%. Plus, the special surface treatment improves the durability & performance.- Adjustment tools included in the kit. Notice- No instruction included; Professional installation is highly recommended.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.



...

Introduction Ma Xpeedingrods is a leading manufacturer of high-quality Auto parts since 2006. Ma Xpeedingrods coilovers are designed & developed for all motoring enthusiasts wanting excellent handling without sacrificing comfort. This suspension system features 24 levels of damping force adjustability & full length adjustment to meet every driver's handling desires. Pillow ball mounts & adjustable camber plates are included for front & rear on most kits to increase steering response, while aluminium upper mounts with hardened rubber bushings are used on some applications for noise reduction. This suspension system is ideal for daily driving & occasional track use. Applications Compatible for Subaru Outback 2003-2009 (BL BP) Compatible for Subaru Legacy IV 2003-2009 (B13) Specifications - Brand: Ma Xpeedingrods - Condition: 100% Brand New - Warranty: 1 Year - Damper: 24 ways damper force - Spring Rate Front: 8kg/mm (448lbs/in) - Spring Rate Rear: 6kg/mm (336lbs/in) - Sp... ...

Introduction MXR-B2 coil-overs are designed as entry-level for street use. It features height adjustable & adjustable camber plates (applicable for some vehicles), which offer you a lowered stance, & enhanced performance for your daily use vehicle. Application Compatible for Honda Acoord VIII Sedan (USA) CP2/CP3 2008-2012compatible for Acura TSX Sedan (USA) CU2 2009-2014, excluding Special Editioncompatible for Honda Accord VIII Coupe CS1CS2 (USA) 2008-2012compatible for Acura TSX Sport Wagon (USA) 2011-2013compatible for Honda Accord VIII Sedan (EU/JPN) CU1 2008-2013compatible for Honda Accord VIII Type-S Sedan (EU/JPN) CU2 2008-2013compatible for Honda Accord Tourer Wagon (EU/JPN) CW1/CW2/CW32008-2013compatible for Honda Euro Sedan (Australia& New Zealand) CU1/CU2 2008-2015 Note: Accord trim levels EX, EX-L, LX-S, & compatible for Acura TSX Sedan & Sport Wagon have strut tower bar mounting points. Accord trim levels LX, SE, & LX-P have reserved factory mounting points.

Specification...

...

Application Compatible for Toyota Corolla E90 E100 E110 AE92 AE101 AE111 1988-1999 Specification Quantity: 4PCS of Coilovers (2 piece front + 2 pieces rear) Adjustable camber plate: Yes（front only） Adjustable

Height: Yes (Front 306-396mm; Rear 341-481mm) Spring rate front: 8 kg/mm (448 lbs/in) Spring rate rear: 6 kg/mm (336 lbs/in) Shock type: Twin tube Spring preload: 7-10 mm
Colour: Red Warranty: one year warranty for any manufacturing defect Daily driver, occasional autocross day or occasional track days，equally at home on street & track. For those seeking a lowered stance as well as enhanced handling & response at a high value. Features- Able to lower ride height by 1''-3''; allows user to have a more aggressive stance.- Pillow ball top mount --- this design helps combat noise while tuning. It also improves the steering feel & response.- The user can enjoy a comfortable riding experience in all road conditions.- Twin-Tube Shock design is used for low internal frictional resistance in ord...


...

Application Compatible for Toyota Corolla E90 E100 E110 AE92 AE101 AE111 1988-1999 Specification Quantity: 4PCS of Coilovers (2 piece front + 2 pieces rear) Adjustable camber plate: Yes（front only） Adjustable

Height: Yes (Front 306-396mm; Rear 341-481mm) Spring rate front: 8 kg/mm (448 lbs/in) Spring rate rear: 6 kg/mm (336 lbs/in) Shock type: Twin tube Spring preload: 7-10 mm
Colour: Red Warranty: one year warranty for any manufacturing defect Daily driver, occasional autocross day or occasional track days，equally at home on street & track. For those seeking a lowered stance as well as enhanced handling & response at a high value. Features- Able to lower ride height by 1''-3''; allows user to have a more aggressive stance.- Pillow ball top mount --- this design helps combat noise while tuning. It also improves the steering feel & response.- The user can enjoy a comfortable riding experience in all road conditions.- Twin-Tube Shock design is used for low internal frictional resistance in order to increase efficiency & keep shock temps low.- Height adjustment does not sacrifice damper stroke length.- These coilovers are able to have their height adjusted without being taken out of the car.- Most components of the suspension parts are made from 6061-T6 aluminum to increase strength & rigidity.- High Tensile strength performance spring---Tested under a 600, 000 time continuous compression test, the spring distortion was less than 0.04%. Plus, the special surface treatment improves the durability & performance.- Adjustment tools included in the kit. Note-No instruction included; Professional installation alignment suggested.-Please check our store for other auto parts you may be interested in.-Please feel free to contact us for whatever we can help.


...

Introduction Ma Xpeedingrods' street coilovers are designed & developed for all motoring enthusiasts that want excellent handling without sacrificing comfort. This suspension system is ideal for daily driving & occasional, light track use. High quality components are adopted to ensure product durability & stability. Each application is fully test fitted & completely road tested to guarantee all our customers perfect performance & comfort expectations. Application Compatible For Lexus LS400 XF10 1990-1994 Compatible For Toyota Celsior 1990-1994 Specification Top mounts: standard rubber top mount front & rear Damping adjustable: Available, 24 levels of rebound damping force Camber adjustable: Not available Height adjustable: Yes, lowering 1-3 inches depending on the vehicle models Spring Rate Front: 10kg/mm (560lbs/in) Spring Rate Rear: 8kg/mm (448lbs/in) Front spring inner diameter: 70.5mm Rear spring inner diameter: 70.5mm Spring length Front: 200mm Spring length Rear: 230mm Spring Preload ad... ...