Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket adjustable coilovers suspension kit compatible for Subaru Impreza series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Subaru Impreza GC8 93-01 Notice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specifications Quantity: Complete coilovers 2 front & 2 rear as shown in the picture Adjustable damper: 24 levels rebound dampening adjustable Adjustable

Height: Yes Adjustable camber plate: Front only Front & rear upper mounts: Pillow ball Spring rate front: 10 kg/mm (556 in/lbs) Spring rate rear: 6 kg/m...


...

Introduction MXR-B2 series (also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application 2005-2014 compatible for Ford Mustang S-197 2005-2014 compatible for Ford Mustang GTS-197 Specification Top mount: Front camber plate Front spring rate: 8kg/mm (448 lbs/in) Rear spring rate: 6kg/mm (336 lbs/in) Adjustable

Height: lowering 1-3 inch Shock type: Twin tube Spring Preload: 7-10 mm
Colour: gold body with black spring Package included Front complete coilover assembly Rear springs & spring adjusters & shocks A pair of front drop links A pair wrench for height adjustment Dimension Package dimension: 71*51*21 Weight: 27500g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2. Camber plate top mounts help to eliminate the need for a separate camber kit. 3. Twin-Tube structure allows sufficient stroke within the shock absorber. 4. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. 5. Separate height adjustment does not affect damper stroke & height can be adjusted with coilovers installed on the vehicle. 6. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 7. Most pieces in our coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 8. Steel shock bodies with special surface treatment to improve the durability. 9. Full rebuildable Note NOT compatible for Shelby for GT500 Models Warranty: one year warranty for any manufacturing defect




...

Introduction MXR-SLC based on MXR-SNA coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for TOYOTA COROLLA (E140) AZE141L XRS 2009-2010compatible for TOYOTA COROLLA (E140/E160) ZRE142L LE 2009-2013compatible for TOYOTA COROLLA (E150/E170) ZRE172L all 2014-2019compatible for TOYOTA MATRIX (E140)LE 2009-2014 Notice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Top mounts: pillow ball top mount with camber plate front, standard rubber top mount rear. Damping: 24 levels rebound damping adjustable Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in) Spring length Front: 200mm Spring length Rear: 160mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 360mm-455mm Coilover overall length Rear: 313mm-370mm Shock type: Twin tube Spring Preload: 7-10 mm
Colour: gold Package includedproduct included: complete coilovers 2 front & 2 rear, a pair wrench for height adjustment. Dimension Gross weight: 25.8kg Package

Size: 63*51*21cm Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2. Camber plate top mounts help to eliminate the need for a separate camber kit.（ Only Front) 3. Pillow ball top mount
- It improves the steering feel & response.（ Only Front) 4. Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts. (Only Rear) 5. Twin-Tube structure allows sufficient stroke within the shock absorber. 6. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. 7. Separate height adjustment does not affect damper stroke. 8. Height can be adjusted with coilovers installed on the vehicle. 9. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 10. Height Adjustment tools included. 11. Full rebuildable. 12.A 24 rebound dampening adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions.







...

Application Compatible for Jeep CHEROKEE XJ 4WD Track Bar 1984-2001 Compatible for Jeep CHEROKEE XJ 2WD Track Bar 1984-2001 Notice: DOES Not FIT RHD

Specification-

Material: Carbon Steel (with a wall thickness of. 236" & 1" outer diameter)- Placement on Vehicle: Front- Bushing: one end poly & one end Heim joint- Surface Finish: powder-coated- Length Adjustable Range: 4 inch- The Center of Heim to the Center Bushing: MAX 830mm / MIN 790mm- Ride

Height: Accommodates 4''-6.5'' of Vehicle Lift- Item Weight: 6.90kg- Package Dimension: 99*16*16cm- Warranty: 1 Year for any manufacturing defect Package
Includes:1x Track bar 1x Bracket 2x M12*1.5*65 screws 2x Joint spacer Feature- Adjustable Design: Adjustable track bars allow you to precisely center your axles under your compatible for Jeep. This will improve the ride, comfort, & handling.- Installation: Easy installation, bring maximum ride comfort.- Vehicle Fitment: The Front Adjustable Track Bar is engineered to fit Cherokee XJs.- Designed for...






...

Application Compatible for Jeep CHEROKEE XJ 4WDTrack Bar 1984-2001 Compatible for Jeep CHEROKEE XJ 2WDTrack Bar 1984-2001 Note: DOES Not FIT RHDSpecification Condition: 100% Brand New Placement on Vehicle: Front
Material: High Tensile Strength Carbon Steel Bushings： Premium Polyurethane Bushings Heim-Joint： The Heim-Joint design has a larger range of movement & increases the rigidity of the suspension, allowing the rear wheel to gain greater grip. Surface Finish： Durable Powder Coating Treatment：provides superior corrosion resistance. Outer diameter: 1" Thick Wall: 0.236"eye-to-eye length range: 790-830mmcompatible for a vehicle with a 4''-6.5'' Lift Package included: 1* Trackbar 1* Bracket 2* M12*1.5*65 screws 2 * Joint spacer Feature 1. Adjustable straps allow you to precisely center your shafts under your compatible. This improves drivability, comfort & handling.2. Fine adjustment threads enable precise axle positioning 3. Constructed with Extremely strong tube construction powder coated steel & O...
...

Application Compatible for Ram 1500 STANDARD 4WD 2019-2025 Compatible for Dodge Ram 1500 STANDARD 4WD 2019-2025 Note： Not fit for factory air. Not fit for 2019 Classic model & TRX model. Specification Condition: Brand New Minimum PSI: 5 PSIMaximum PSI: 100PSIInternal Jounce Bumper included: Yes Placement on Vehicle: Rear left & right Air spring---Load capacity： Up to 5000 LBSDesign height：180mm Stroke:100mm Max. Extended: 200mm Min. Compressed: 100mm Package
Includes:（as the picture shows）:2x Heavy Duty Double Bellow Air Ride Suspension bags 6x Upper & lower mounting brackets
Includes: All Brackets & Hardware Needed to Install Feature 1. Stress Test Over 5, 000, 000 Times： Durable & Safe 2. Burst Pressure≥2.0 M Pa： High Compressive Strength & Less Noise 3. 100% Air Tightness Guarantee 4. Temperature Range ≥ -40℃/ ≤ 70℃ (≥ -40°F/≤ 158°F)： Premium Natural Rubber Material 5. 4-Layer reinforcement construction: Enhances air spring load support.6. Use high-quality steel with high load-bearing capacity a...

...

Package include ( Important Notice: The fittings are divided into metric fittings & imperial fittings. Ours are metric. )1x 6ft Hose（diameter 16*1.5mm）1x 4ft Hose（diameter 22*1.5mm）1x 5ft Hose（diameter 24*1.5mm）1x Black Drier w/ Clamp 1x Beadlock Fitting 135 Degree w/ Service Port（diameter 22*1.5mm）1x Beadlock Fitting 135 Degree w/ Service Port（diameter 24*1.5mm）1x Beadlock Fitting Straight（diameter 16*1.5mm）1x Beadlock Fitting Straight（diameter 24*1.5mm）2x Beadlock Fitting 45 Degree（diameter 16*1.5mm）1x Beadlock Fitting 45 Degree（diameter 22*1.5mm）3x Beadlock Fitting 90 Degree（diameter 16*1.5mm）2x Beadlock Fitting 90 Degree（diameter 24*1.5mm）1x Beadlock Fitting Bulkhead 90 Degree（diameter 16*1.5mm）1x Beadlock Fitting Bulkhead 90 Degree（diameter 24*1.5mm） The type of product interface :R-Ring Please double-check the interface type before purchasing Specifications 134A Barb Fitting Hose Kit Condition: 100% brand new Warranty: 1 years warranty for any manufacturing de... ...

Application Compatible for Land Rover Discovery 3 LR3 2005-2009 Compatible for Land Rover Discovery 4 LR4 2010-2014 Compatible for Land Rover compatible for Range Rover Sport 2006-2013 Reference OE/OEM Number LR0 23964, LR0 45251, LR0 61663, LR006200, LR010376, LR010414, LR011837, LR012705, LR023964, LR032902, LR037065, LR038114, LR038115, LR038116, LR038117, LR038118, LR038148, LR041776, LR044016, LR044360, LR045251, LR045444, LR061663, LR061888, LR072537, LR015303, RQG500015, RQG500016, RQG500018, RQG500019, RQG500070, RQG500071, RQG500072, RQG500080, RQG500090, RQG500130, RQG500150, RQG500160, RYG500160. Specification Condition: New Fitment Type: Direct Replacement Quantity: 1pc Air Compressor Pump Placement on Vehicle: Front, Rear, Left, Right Length, width &

Height: 33*21*20cm（13*8.3*7.9inch） Weight: 4.12KGOperating Pressure: 20bar Temperature range：‘-30℃—80℃ Amperage: 35 Voltage: DC13 V Feature 1. Plug & play 2. 100% fully tested 3. Shipping immediately 4. Designed for a comfortable compressor & is of high quality 5. High-quality steel materials for high resilience & long service life 6. Replaces the car's original compressor, Original OE quality 7. Long-term tested (300h)8. Suitable for operation at an ambient temperature of -30°C to 80°C9. IP protection class: IPX410. Small size, easy to carry 11. Durability & safety 12. Powerful & quiet compressor 13. Easy bolt-on installation requires no modification 14. An integrated dryer removes all moisture & humidity from the air system that cause corrosion Notice- These air suspension Compressor are aftermarket ones. They will replace the originalair compressor. Please double confim the compatibility as well as the OEM number before purchasing.- Professional installation is recommended.- Contact us please for whatever we can help. Warranty: one year warranty for any manufacturing defect

...

Feature: New in box one year warranty Our full kit of bushings for RZR will keep you up & running & keep you’re A arms free from wear. Our HDPE are low-wear & long-lasting. UHMWis your best choice for long last a arm bushings. UHMW is a low wear material, ensuring you more miles than your factory bushings. What allows for it's low wear properties is in part due to the fact that UHMW is a self-lubricating material. With that, you have less friction between your bushings & a arm. Application: Compatible for Polaris RZR 800 2008-2014 Compatible for Polaris RZR S 800 2009-2014 Compatible for Polaris RZR 4 800 2010-2014 Package: (28) Small Bushings (14) Replacement Sleeves All as picture shown Warranty: one year warranty Note: * Please feel free to contact us for whatever we can help. * Instruction is not included. Professional installation is highly recommended. * Will not work with vehicles equipped with drum brakes. Some modif... ...

Application Compatible for Hyundai Sonata 2011-2014 Specification Placement on Vehicle： Left, Right, Front Lens Color： Clear Materia： Polycarbonate Finish： Smooth Package included A Pair Headlight Lens Cover Feature Completely unused & in pristine br&-new condition. Premium quality assured. Effortlessly installs as a direct substitute for your old or broken headlight cover. Crafted from premium-grade polycarbonate. Lightweight design, rust-resistant properties, fade-proof colors, & long-lasting durability Note* Headlight covers may become cloudy or blurry (i.e., fogging) due to temperature differences in the environment. It is recommended to gently wipe the surface with a damp alcohol cloth to remove condensation or stains. Keep the environment dry during this process & avoid using cleaning agents containing organic solvents or corrosive ingredients to prevent damage to the surface material. Please allow 1-3 mm differs due to manual measurement. Due to the different display & different li... ...