Application Compatible for Toyota 4 Runner 1995-2020 compatible for Toyota Hilux 2004-2012 compatible for Toyota Tacoma 1995-2004 compatible for Toyota T100 1995-1998 Specification Item Weight ‎17.44 pounds Package Dimensions ‎13.5 x 12.52 x 5.98 inches Exterior ‎ Painted Feature Durable

Material: made from high-quality material, using advanced production technology. Durable & not easily damaged. Easy To Install: Made to factory specifications for a hassle-free installation. After-sales service: If there is any problem with the product, please do not hesitate to let us know, we will help you solve the problem. Note Warm prompt: The tone ring tool does not fit 2001-2007 compatible for Sequoia. The tool only fits those vehicles listed above. This bearing puller & installer kit only works with the 40mm bearing & tone ring that is separate from the housing. It is not intended for the larger unit bearings used on later generation vehicles. A longer bolts will be required to use compatible fo...

...

Application Compatible for Ford F-250, F-350, 4x 4s Having The Vacuum-Operated Front Axle 2005-Newer Specification Other Part Number：6697 Feature： Installing The Seal Onto The Axle Shaft & Into The Wheel Knuckle Correctly. Preventing Front Hub Vacuum Leaking That Would Result In The 4WD Not Engaging. Condition: New Warranty: one year warranty for any manufacturing defect ...

Applications Compatible for Ford F2504×4 with vacuum front axle 1998-2004 Compatible for Ford F3504×4 with vacuum front axle 1998-2004 Compatible for Ford F4504×4 with vacuum front axle 1998-2004 Compatible for Ford F5504×4 with vacuum front axle 1998-2004 Compatible for Ford Excursion 4×4 with vacuum front axle 1998-2004 Specifications Package Include:1x Axle shaft installer tool Condition: New Warranty: one year warranty for any manufacturing defect Accessories: You will get exactly as shown in the picture above Note No instruction included; Professional installation & alignment suggested. Please check our store for other auto parts you may be interested in. Please feel free to contact us for whatever we can help. ...

Introduction MXR-SLC based on MXR-SNA coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for Honda CR-V 1996-2001 1st Gen. RD1-RD3compatible for FWD & AWDSpecification Front & Rear top mount: rubber Damping: 24 levels rebound damping adjustable Spring rate: front 10kg/mm (560 lbs/in) rear 7 kg/mm (392 lbs/in) Adjustable

Height: Yes lowering 1" to 3" Shock type: Twin tube Spring Preload: 7-10 mm
Colour: gold body with black spring Package included Complete coilovers assembly 2 front & 2 rear A pair wrench for height adjustment Dimension Package dimension: 62*50*19 Weight: 23000g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance 2. A 2...



...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket adjustable coilovers suspension kit compatible for Mitsubishi Eclipse & compatible for Mitsubishi Lancer & Ralliart series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Mitsubishi Lancer & Ralliart (CY2A/CZ4A) 2008-2016 Excludes Lancer Evolution Notice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Top mounts: pillow ball top mount with camber plate front, standard rubber top mount rear Quantity: 2 pieces front + 2 pieces rear, Spanner as shown in the picture Front Spring Rate:9kg/mm...
...

Introduction MXR-B2 series (also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application 2005-2014 compatible for Ford Mustang S-197 2005-2014 compatible for Ford Mustang GTS-197 Specification Top mount: Front camber plate Front spring rate: 8kg/mm (448 lbs/in) Rear spring rate: 6kg/mm (336 lbs/in) Adjustable

Height: lowering 1-3 inch Shock type: Twin tube Spring Preload: 7-10 mm
Colour: gold body with black spring Package included Front complete coilover assembly Rear springs & spring adjusters & shocks A pair of front drop links A pair wrench for height adjustment Dimension Package dimension: 71*51*21 Weight: 27500g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2. Camber plate top mounts help to eliminate the need for a separate camber kit. 3. Twin-Tube structure allows sufficient stroke within the shock absorber. 4. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. 5. Separate height adjustment does not affect damper stroke & height can be adjusted with coilovers installed on the vehicle. 6. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 7. Most pieces in our coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 8. Steel shock bodies with special surface treatment to improve the durability. 9. Full rebuildable Note NOT compatible for Shelby for GT500 Models Warranty: one year warranty for any manufacturing defect




...

Introduction MXR-SLC based on MXR-SNA coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for TOYOTA COROLLA (E140) AZE141L XRS 2009-2010compatible for TOYOTA COROLLA (E140/E160) ZRE142L LE 2009-2013compatible for TOYOTA COROLLA (E150/E170) ZRE172L all 2014-2019compatible for TOYOTA MATRIX (E140)LE 2009-2014 Notice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Top mounts: pillow ball top mount with camber plate front, standard rubber top mount rear. Damping: 24 levels rebound damping adjustable Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in) Spring length Front: 200mm Spring length Rear: 160mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 360mm-455mm Coilover overall length Rear: 313mm-370mm Shock type: Twin tube Spring Preload: 7-10 mm
Colour: gold Package includedproduct included: complete coilovers 2 front & 2 rear, a pair wrench for height adjustment. Dimension Gross weight: 25.8kg Package

Size: 63*51*21cm Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2. Camber plate top mounts help to eliminate the need for a separate camber kit.（ Only Front) 3. Pillow ball top mount
- It improves the steering feel & response.（ Only Front) 4. Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts. (Only Rear) 5. Twin-Tube structure allows sufficient stroke within the shock absorber. 6. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. 7. Separate height adjustment does not affect damper stroke. 8. Height can be adjusted with coilovers installed on the vehicle. 9. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 10. Height Adjustment tools included. 11. Full rebuildable. 12.A 24 rebound dampening adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions.







...

Application Compatible for Jeep CHEROKEE XJ 4WD Track Bar 1984-2001 Compatible for Jeep CHEROKEE XJ 2WD Track Bar 1984-2001 Notice: DOES Not FIT RHD

Specification-

Material: Carbon Steel (with a wall thickness of. 236" & 1" outer diameter)- Placement on Vehicle: Front- Bushing: one end poly & one end Heim joint- Surface Finish: powder-coated- Length Adjustable Range: 4 inch- The Center of Heim to the Center Bushing: MAX 830mm / MIN 790mm- Ride

Height: Accommodates 4''-6.5'' of Vehicle Lift- Item Weight: 6.90kg- Package Dimension: 99*16*16cm- Warranty: 1 Year for any manufacturing defect Package
Includes:1x Track bar 1x Bracket 2x M12*1.5*65 screws 2x Joint spacer Feature- Adjustable Design: Adjustable track bars allow you to precisely center your axles under your compatible for Jeep. This will improve the ride, comfort, & handling.- Installation: Easy installation, bring maximum ride comfort.- Vehicle Fitment: The Front Adjustable Track Bar is engineered to fit Cherokee XJs.- Designed for...






...

Application Compatible for Jeep CHEROKEE XJ 4WDTrack Bar 1984-2001 Compatible for Jeep CHEROKEE XJ 2WDTrack Bar 1984-2001 Note: DOES Not FIT RHDSpecification Condition: 100% Brand New Placement on Vehicle: Front
Material: High Tensile Strength Carbon Steel Bushings： Premium Polyurethane Bushings Heim-Joint： The Heim-Joint design has a larger range of movement & increases the rigidity of the suspension, allowing the rear wheel to gain greater grip. Surface Finish： Durable Powder Coating Treatment：provides superior corrosion resistance. Outer diameter: 1" Thick Wall: 0.236"eye-to-eye length range: 790-830mmcompatible for a vehicle with a 4''-6.5'' Lift Package included: 1* Trackbar 1* Bracket 2* M12*1.5*65 screws 2 * Joint spacer Feature 1. Adjustable straps allow you to precisely center your shafts under your compatible. This improves drivability, comfort & handling.2. Fine adjustment threads enable precise axle positioning 3. Constructed with Extremely strong tube construction powder coated steel & O...
...

Specification Diameters: 6" Steel:Q235steel Material Thickness: 3/8" (10mm) Feature Build 6 Target Dualing Tree Q235steel plates.Q235steel deflects rounds & resists pitting. Set

Includes:: (6) 6" diameter round steel target with post. Warranty: one year warranty for any manufacturing defect

...