More From Contributor

$48
Application Compatible for Dodge Chrysler Small Block Mopar 318 340 360OE/ Part number 1131811, JM6513R, PC7006, 113181, KA-1131811, KA1131811 Specification Type: Distributor Finish: Red Cap
Colour: As received Items Included: Distributor Cap, Ignition Rotor Placement on Vehicle: Front
Material: Plastic& Aluminum Fitment Type: Direct Replacement Package included 1 x Ignition Distributor (As shown in the pictures) Feature This is a High Quality Aftermarket Parts This product comes with best after-sales service. Note 1. Professional Installation Is Highly Recommended. 2. Even if your car is shown in the compatibility, pls also double check the fitment details & photos before ordering.

...
Archived Product
$381
Introduction MXR-B2 series (also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible For HONDA PRELUDE BB1/BB2 1992-1996 Compatible For HONDA PRELUDE SIR/SIR S SPEC/TYPE S BB6/BB8 1996.11-2000.08 Specification Top mounts: pillow ball top mounts Damping: not available Spring rate Front: 8 kg/mm (448 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Spring length Front: 180mm Spring length Rear: 200mm Adjustable

Height:
lowering 1-3 inch Coilover overall length Front: 420mm-465mm Coilover overall length Rear: 550mm-645mm Shock type: Twin tube Spring preload: 7-10 mm
Colour: blue Package includedcomplete coilovers for 2 front & 2 rear a pair wrench for height adjustment Dimensionweight: 24220g
Size: 63*51*21 cm Feature 1. Lowered height adjustment from 1''-3'' which allow lower center of gravity & also add a more aggressive stance 2. Twin-Tube structure allows sufficient stroke within the shock absorber 3. Separate height adjustment does not affect damper stroke 4. High Tensile performance spring – STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus, the special surface treatment improves the durability & performance. 5. Height Adjustment tools included 6. Pillow ball top mount
- It improves the steering feel & response 7. Most pieces in our Coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 8. Full rebuildable Warranty: one year warranty for any manufacturing defect




...
Available
$295
Introduction Ma Xpeeding Rods-B2 series (also called Ma Xpeeding Rods-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible For HONDA PRELUDE BB1-BB9 1992-2001 Note: This coil-over is perfectly suitable with TYPE S, Si R, & S SPEC which has strut tower bar mounting points. It can also be used directly for some USDM Preludes which have reserved factory mounting points. For some models without mounting points, you can remove the 2 additional studs. Specification Top mounts: pillow ball top mounts Damping: not available Spring rate Front: 8 kg/mm (448 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Spring length Front: 180mm Spring length Rear: 200mm Adjustable

Height:
lowering 1-3 inch Coilover overall length Front: 420mm-465mm Coilover overall length Rear: 550mm-645mm Shock type...

...
Available
$294
Application Compatible for Lincoln Mark VIII 1993-1998 Specification Front top mount: Pillow ball with Damping adjustable: Not available Height adjustable: Yes Camber adjustable: Not available Spring rate Front: 14 kg/mm (784 lbs/in) Front spring inner diameter: 70.5 mm Spring length Front: 230 mm Spring Preload advised: 7-10 mm
Colour: Golden body with black spring Package included Package included: 2x Front coil-overs 2x C spanners Dimension Package size: 70*50*20 cm Weight: 16850 g Feature 1. Height is adjustable, depending on the vehicle model. 2. Adjustable pre-load spring tension to reduce the shaking motion to a certain extent 3. Adjustable Pillow ball top mount for sharpening steering response. (for some models) 4.CNC machined Aluminumtop mounts & lockers--
- excellent strength, & save weight 5. Heavy Duty Steel Lower Mounts--- Highly Durable & Reliable 6. High tensile spring---600, 000 times continuously test to assure its high tensile strength. 7. All inserts come with fitted long rubb...

...
Archived Product
$445
Application Compatible for Nissan S13 Silva Japan Market 89-93 Compatible for Nissan S13 180SX Japan Market 89-98 Compatible for Nissan S13 200SX Europe/ New Zealand Market 89-94 Compatible for Nissan S13 240SX North America 89-90 Compatible for Nissan S13 Sileighty Japan Market 98 Specifications Top mounts: pillow ball top mount with camber plate front, standard rubber top mount rear. Damping: 24 levels rebound damping adjustable. Front Spring Rate: 8kg/mm (448lbs/in) Rear Spring Rate: 7 kg/mm (392lbs/in) Adjustable

Height:
Yes lowering 1" to 3" Shock Type: Twin tube Spring Preload: 7-10 mm
Colour: Black body with blue spring Package: complete coilovers 2 front & 2 rear, a pair wrench for height adjustment. Feature 1. Lowered height adjustment from 1"
- 3" which allow a lower centre of gravity & also add a more aggressive stance.2. Adjustable Camber Plate & Pillow ball top mount for sharpening steering response.( Front Only)3. Rubber top mounts help to deliver a smooth & forgiving ride for city u...



...
Archived Product
$399
Introduction Ma Xpeedingrods COT6 lowering coilover, features 24 clicks adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plates & decent outlook, offers you more ability to tune your suspension on performance & gives your vehicle more impressive appearance. This suspension system is ideal for daily driving & occasional, light track use. High quality components are adopted to ensure product durability & stability. Each application is fully test fitted & completely road tested to guarantee all our customers perfect performance & comfort expectations. Application Compatible for S14 Silvia 1994-1998 (Japan Market) Compatible for S14 200SX BASE MODEL/ LE 1994-1998 (Europe / Australia/ New Zealand Market) Compatible for S14 240SX BASE MODEL/ LE/SE 1995-1998 (USA Market) Note: Don't compatible for Nissan 200SX SE /SE-RSpecification Front top mount: Pillow ball with camber plate Rear top mo... ...
Archived Product
$445
Introduction Ma Xpeeding Rods T6 (also known as SP1) lowering coilover, standard with adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plate(for some vehicles) & decent outlook, offers you more ability to tune your suspension on performance & gives your vehicle more impressive appearance. Besides, all our coilover are assembled in dust-free factory, which turns out good quality & long life. Application Compatible for Nissan Skyline R33 GTS GTST 1993-1998 Specifications Top mounts: standard rubber top mount front & rear Damping: 24 levels rebound damping adjustable Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 8 kg/mm (448 lbs/in) Adjustable camber plate: No Adjustable

Height:
Yes lowering 1" to 3" Shock type: Twin tube Spring preload: 7-10 mm
Colour: Black body with blue springproduct included: complete coilovers 2 front & 2 rear Dimension
Size: 71*51*21 cm Weight: 25.02kg Feature Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. Adjustable pre-load spring tension to reduce the shaking motion to a certain extent.24 levels of adjustable damper -- This allows you the ability to perfectly dial in your coilovers system. For a nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. For occasional track days, set it to full stiff.CNC machined Aluminum top mounts & lockers--
- excellent strength, & save weight. Heavy Duty Steel Lower Mounts--- Highly Durable Reliable. Upgraded spring --- more than 600, 000 times continuously test to assure it's high tensile strength. All inserts come with fitted long rubber boots--- To protect the damper more well & be durable. With better damping setting, you will get better performance & comfort at the same time. Twin-Tube structure ---provides excellent handling control characteristics for most driving conditions. Corrosion Finish
- Anodized Aluminum & Powder Coated Carbon Steel Parts. Clean room assembled---maintain higher level of accuracy & reliability. Upgraded damper oil---make damping more stable & smooth in wide temperature range. Note Please check our store for other auto parts you may be interested in. Please feel free to contact us for whatever we can help with. Warranty: one year warranty for any manufacturing defect






...
Archived Product
$512
Introductionma Xpeedingrods SP1 lowering coilover, standard with adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plate(for some vehicles) & decent outlook, offers you more ability to tune your suspension on performance & gives your vehicle more impressive appearance. Besides, all our coilover are assembled in dust-free factory, which turns out good quality & long life. Application Compatible for Honda CR-V 1996-2001 1st Gen. RD1-RD3compatible for FWD & AWDSpecification Front & Rear top mount: rubber Damping: 24 levels rebound damping adjustable Front spring rate: 10kg/mm (560 lbs/in) Rear spring rate:7 kg/mm (392 lbs/in) Adjustable

Height:
Yes lowering 1" to 3" Shock type: Twin tube Spring Preload: 7-10 mm
Colour: black body with blue spring Package included Complete coilovers assembly 2 front & 2 rear A pair wrench for height adjustment Dimension Package dimension: 63*51*21 Weig...


...
Archived Product
$512
Introductionma Xpeedingrods T6 lowering coilover, standard with adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plate(for some vehicles) & decent outlook, offers you more ability to tune your suspension on performance & gives your vehicle more impressive appearance. Besides, all our coilover are assembled in dust-free factory, which turns out good quality & long life. Application Compatible for Honda CR-V 1996-2001 1st Gen. RD1-RD3compatible for FWD & AWDSpecification Front & Rear top mount: rubber Damping: 24 levels rebound damping adjustable Front spring rate: 10kg/mm (560 lbs/in) Rear spring rate:7 kg/mm (392 lbs/in) Adjustable

Height:
Yes lowering 1" to 3" Shock type: Twin tube Spring Preload: 7-10 mm
Colour: black body with blue spring Package included Complete coilovers assembly 2 front & 2 rear A pair wrench for height adjustment Dimension Package dimension: 63*51*21 Weigh...


...
Archived Product
$440
Introduction Ma Xpeeding Rods T6 lowering coilover, standard with adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plate(for some vehicles) & decent outlook, offers you more ability to tune your suspension on performance & gives your vehicle more impressive appearance. Besides, all our coilover are assembled in dust-free factory, which turns out good quality & long life. Application Compatible for Honda Accord VII 4-door sedan CM4/CM5/CM6 2003-2007 Compatible for Honda Accord VII 2-door coupe CM7/CM8 2003-2007 Compatible for Honda Inspire 2003-2007 ( Japan market only) Specification Top mounts Front pillow ball top mounts Damping 24 levels rebound damping adjustable Adjustable height Yes, lowering 1" to 3" Adjustable camber plate No Spring rate Front 10 kg/mm (560 lbs/in) Spring rate Rear 6 kg/mm (336 lbs/in) Shock type Twin tube Spring Preload 7-10 mm... ...
Archived Product

Height And Damper Adjustable Coilover Kits Compatible For Nissan S14
94-98

ApplicationCompatible for S14 Silvia 1994-1998 (Japan Market)Compatible for S14 200SX 1994-1998 (Europe / Australia/ New Zealand Market)Compatible for S14 240SX 1995-1998 (USA Market)Note: Don't Compatible forNissan 200SX SESpecificationsTop mounts: pillow ball top mount with camber plate front, standard rubber top mount rear.Damping: 24 levels rebound damping adjustable.Front Spring Rate: 8kg/mm(448lbs/in)Rear Spring Rate: 6kg/mm (336lbs/in)Adjustable Height: Yes lowering 1" to 3"Shock type: Twin tubeSpring Preload: 7-10 mmColor: Black body with blue springproduct included: complete coilovers 2 front and 2 rear, a pair wrench for height adjustment.DimensionGross weight:26.06kgPackage size:71*51*21cmFeature1. Lowered height adjustment from 1" - 3" which allow lower center of gravity and
also add a more aggressive stance.2.Adjustable Camber Plate and Pillow ball top mount for sharpening steering response.(Front Only)3. Rubber top mounts help to deliver a smooth and forgiving ride for city use at any speed and rubber joints assist in absorbing hard impacts. (only rear)4.24 levels of adjustable damper -- This allows you the ability to perfectly dial in your coilovers system. For a nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. For occasional track days, set it to full stiff.5. Twin-Tube structure ---provides excellent handling control characteristics for most driving conditions.6. Complete Suspension Kit of 4 Shock Absorbers 4 Springs for an easy installation.7. Separate height adjustment does not affect damper
stroke, Height can be adjusted with coilovers installed on the vehicle.8.High Tensile performance spring - STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability and performance.9. Height Adjustment tools included.10. Full rebuildable.11.Upgraded damper oil---make damping more stable and smooth in wide temperature range.12.Clean room assembled---maintain higher level of accuracy and reliability.13.All inserts come with fitted long rubber boots--- To protect the damper more well and be durable.14.Radial bearing in upper spring compatible for seat helps fast steering.(Front Only)NotePlease check our store for other auto parts you may be interested in.Please feel free to contact us for whatever we can help
with.Warranty: one year warranty for any manufacturing defect
RIP - This product is no longer available on our network. It was last seen on 20.01.2025

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
  • External links may include paid for promotion
Availability: In Stock
$445

Product Description

Application Compatible for S14 Silvia 1994-1998 (Japan Market) Compatible for S14 200SX 1994-1998 (Europe / Australia/ New Zealand Market) Compatible for S14 240SX 1995-1998 (USA Market) Note: Don't Compatible for Nissan 200SX SESpecifications Top mounts: pillow ball top mount with camber plate front, standard rubber top mount rear. Damping: 24 levels rebound damping adjustable. Front Spring Rate: 8kg/mm (448lbs/in) Rear Spring Rate: 6kg/mm (336lbs/in) Adjustable

Height:
Yes lowering 1" to 3" Shock type: Twin tube Spring Preload: 7-10 mm
Colour: Black body with blue springproduct included: complete coilovers 2 front & 2 rear, a pair wrench for height adjustment. Dimension Gross weight:26.06kg Package
Size:71*51*21cm Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance.2. Adjustable Camber Plate & Pillow ball top mount for sharpening steering response.( Front Only)3. Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts. (only rear)4.24 levels of adjustable damper -- This allows you the ability to perfectly dial in your coilovers system. For a nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. For occasional track days, set it to full stiff.5. Twin-Tube structure ---provides excellent handling control characteristics for most driving conditions.6. Complete Suspension Kit of 4 Shock Absorbers 4 Springs for an easy installation.7. Separate height adjustment does not affect damper stroke, Height can be adjusted with coilovers installed on the vehicle.8. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance.9. Height Adjustment tools included.10. Full rebuildable.11. Upgraded damper oil---make damping more stable & smooth in wide temperature range.12. Clean room assembled---maintain higher level of accuracy & reliability.13. All inserts come with fitted long rubber boots--- To protect the damper more well & be durable.14. Radial bearing in upper spring compatible for seat helps fast steering.( Front Only) Note Please check our store for other auto parts you may be interested in. Please feel free to contact us for whatever we can help with. Warranty: one year warranty for any manufacturing defect

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Japan - An island in east Asia
Black - A colour which does not emit any colour of the spectrum. Black absorbs all frequencies of the spectrum.
Blue - A primary colour
Warranty - A service provided by the retailer or manufacturer to ensure a device works for a period from new
Stress - Also known as tension, a situation where a human can not cope with emotional or physical threats
rubber - Synthetic rubber is any artificial elastomer, usually a polymer, and is used as a substitute for natural rubber.
rubber - Natural rubber is an elastomer derived from the latex containing sap of some plants.
Oil - A hydrophobic liquid with high carbon and hydrogen content. Has many variations including; cooking oils, petrochemical oils, essential oils.
vehicle - A manufactured device used to transport people or cargo.
soft - A descriptive word for an item/sound which is gentle to the touch or ears
deliver - The method by which something is delivered fomr one location to another
Pillow - A soft cushion support for the head used while sleeping or for support.
weight - A measure of the force applied on an object by gravity. Measured metric in grams and kilos or imperial in lbs and oz
speed - A measurement of how fast an object travels between two points
Year - The time it takes the planet earth to orbit the sun. This takes around 365.25 days.
Set - a group of items usually related to one another. Some objects cannot function without the complete set of items.
Size - is the measurement of how big an object is in space.
Warranty - A purchasers guarantee from the manufacturer for replacement/fix of goods when faulty.
Adjustable - Something that can be changed or slightly modified to fit.
Treatment - A way in which medics care for patients illnesses. A manner which someone behaves to someone else.
Wide - Something with a large width.
Twin - A pair of people or animals that are born at the same time.
Year - 365 days (366 days in a leap year), the time taken for planet earth to make one full revolution around the sun.
Adjustable - Something that can be changed in order to fit better.
Performance - When someone is presenting a form of entertainment, also how well someone is doing within a role.
Joints - The sections where one component is joined to another.

Supplier Information

Maxpeeding Rods US
Rev up your engine with Maxpeedingrods (https://www.maxpeedingrods.com/)! Explore a wide selection of high-performance auto parts and accessories at unbeatable prices. From turbochargers and connecting rods to coilovers and camshafts, we've got everything you need to boost your ride's power and style. With top-notch quality and expert engineering, our products are designed to maximize performance and reliability on the road or track. Whether you're a car enthusiast or a professional racer, trust Maxpeedingrods to take your driving experience to the next level. Shop now and unleash the full potential of your vehicle!
Page Updated: 2026-01-20 12:40:53

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu