Introduction MXR-B2 series (also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible For HONDA PRELUDE BB1/BB2 1992-1996 Compatible For HONDA PRELUDE SIR/SIR S SPEC/TYPE S BB6/BB8 1996.11-2000.08 Specification Top mounts: pillow ball top mounts Damping: not available Spring rate Front: 8 kg/mm (448 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Spring length Front: 180mm Spring length Rear: 200mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 420mm-465mm Coilover overall length Rear: 550mm-645mm Shock type: Twin tube Spring preload: 7-10 mm
Colour: blue Package includedcomplete coilovers for 2 front & 2 rear a pair wrench for height adjustment Dimensionweight: 24220g
Size: 63*51*21 cm Feature 1. Lowered height adjustment from 1''-3'' which allow lower center of gravity & also add a more aggressive stance 2. Twin-Tube structure allows sufficient stroke within the shock absorber 3. Separate height adjustment does not affect damper stroke 4. High Tensile performance spring – STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus, the special surface treatment improves the durability & performance. 5. Height Adjustment tools included 6. Pillow ball top mount
- It improves the steering feel & response 7. Most pieces in our Coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 8. Full rebuildable Warranty: one year warranty for any manufacturing defect




...

Introduction Ma Xpeeding Rods-B2 series (also called Ma Xpeeding Rods-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible For HONDA PRELUDE BB1-BB9 1992-2001 Note: This coil-over is perfectly suitable with TYPE S, Si R, & S SPEC which has strut tower bar mounting points. It can also be used directly for some USDM Preludes which have reserved factory mounting points. For some models without mounting points, you can remove the 2 additional studs. Specification Top mounts: pillow ball top mounts Damping: not available Spring rate Front: 8 kg/mm (448 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Spring length Front: 180mm Spring length Rear: 200mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 420mm-465mm Coilover overall length Rear: 550mm-645mm Shock type...

...

Application Compatible for Lincoln Mark VIII 1993-1998 Specification Front top mount: Pillow ball with Damping adjustable: Not available Height adjustable: Yes Camber adjustable: Not available Spring rate Front: 14 kg/mm (784 lbs/in) Front spring inner diameter: 70.5 mm Spring length Front: 230 mm Spring Preload advised: 7-10 mm
Colour: Golden body with black spring Package included Package included： 2x Front coil-overs 2x C spanners Dimension Package size: 70*50*20 cm Weight: 16850 g Feature 1. Height is adjustable, depending on the vehicle model. 2. Adjustable pre-load spring tension to reduce the shaking motion to a certain extent 3. Adjustable Pillow ball top mount for sharpening steering response. (for some models) 4.CNC machined Aluminumtop mounts & lockers--
- excellent strength, & save weight 5. Heavy Duty Steel Lower Mounts--- Highly Durable & Reliable 6. High tensile spring---600, 000 times continuously test to assure its high tensile strength. 7. All inserts come with fitted long rubb...

...

Application Compatible for Nissan S13 Silva Japan Market 89-93 Compatible for Nissan S13 180SX Japan Market 89-98 Compatible for Nissan S13 200SX Europe/ New Zealand Market 89-94 Compatible for Nissan S13 240SX North America 89-90 Compatible for Nissan S13 Sileighty Japan Market 98 Specifications Top mounts: pillow ball top mount with camber plate front, standard rubber top mount rear. Damping: 24 levels rebound damping adjustable. Front Spring Rate: 8kg/mm (448lbs/in) Rear Spring Rate: 7 kg/mm (392lbs/in) Adjustable

Height: Yes lowering 1" to 3" Shock Type: Twin tube Spring Preload: 7-10 mm
Colour: Black body with blue spring Package: complete coilovers 2 front & 2 rear, a pair wrench for height adjustment. Feature 1. Lowered height adjustment from 1"
- 3" which allow a lower centre of gravity & also add a more aggressive stance.2. Adjustable Camber Plate & Pillow ball top mount for sharpening steering response.（ Front Only)3. Rubber top mounts help to deliver a smooth & forgiving ride for city u...



...

Application Compatible for S14 Silvia 1994-1998 (Japan Market) Compatible for S14 200SX 1994-1998 (Europe / Australia/ New Zealand Market) Compatible for S14 240SX 1995-1998 (USA Market) Note: Don't Compatible for Nissan 200SX SESpecifications Top mounts: pillow ball top mount with camber plate front, standard rubber top mount rear. Damping: 24 levels rebound damping adjustable. Front Spring Rate: 8kg/mm (448lbs/in) Rear Spring Rate: 6kg/mm (336lbs/in) Adjustable

Height: Yes lowering 1" to 3" Shock type: Twin tube Spring Preload: 7-10 mm
Colour: Black body with blue springproduct included: complete coilovers 2 front & 2 rear, a pair wrench for height adjustment. Dimension Gross weight:26.06kg Package
Size:71*51*21cm Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance.2. Adjustable Camber Plate & Pillow ball top mount for sharpening steering response.（ Front Only)3. Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts. (only rear)4.24 levels of adjustable damper -- This allows you the ability to perfectly dial in your coilovers system. For a nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. For occasional track days, set it to full stiff.5. Twin-Tube structure ---provides excellent handling control characteristics for most driving conditions.6. Complete Suspension Kit of 4 Shock Absorbers 4 Springs for an easy installation.7. Separate height adjustment does not affect damper stroke, Height can be adjusted with coilovers installed on the vehicle.8. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance.9. Height Adjustment tools included.10. Full rebuildable.11. Upgraded damper oil---make damping more stable & smooth in wide temperature range.12. Clean room assembled---maintain higher level of accuracy & reliability.13. All inserts come with fitted long rubber boots--- To protect the damper more well & be durable.14. Radial bearing in upper spring compatible for seat helps fast steering.（ Front Only) Note Please check our store for other auto parts you may be interested in. Please feel free to contact us for whatever we can help with. Warranty: one year warranty for any manufacturing defect





...

Introduction Ma Xpeeding Rods T6 (also known as SP1) lowering coilover, standard with adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plate（for some vehicles) & decent outlook, offers you more ability to tune your suspension on performance & gives your vehicle more impressive appearance. Besides, all our coilover are assembled in dust-free factory, which turns out good quality & long life. Application Compatible for Nissan Skyline R33 GTS GTST 1993-1998 Specifications Top mounts: standard rubber top mount front & rear Damping: 24 levels rebound damping adjustable Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 8 kg/mm (448 lbs/in) Adjustable camber plate: No Adjustable

Height: Yes lowering 1" to 3" Shock type: Twin tube Spring preload: 7-10 mm
Colour: Black body with blue springproduct included: complete coilovers 2 front & 2 rear Dimension
Size: 71*51*21 cm Weight: 25.02kg Feature Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. Adjustable pre-load spring tension to reduce the shaking motion to a certain extent.24 levels of adjustable damper -- This allows you the ability to perfectly dial in your coilovers system. For a nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. For occasional track days, set it to full stiff.CNC machined Aluminum top mounts & lockers--
- excellent strength, & save weight. Heavy Duty Steel Lower Mounts--- Highly Durable Reliable. Upgraded spring --- more than 600, 000 times continuously test to assure it's high tensile strength. All inserts come with fitted long rubber boots--- To protect the damper more well & be durable. With better damping setting, you will get better performance & comfort at the same time. Twin-Tube structure ---provides excellent handling control characteristics for most driving conditions. Corrosion Finish
- Anodized Aluminum & Powder Coated Carbon Steel Parts. Clean room assembled---maintain higher level of accuracy & reliability. Upgraded damper oil---make damping more stable & smooth in wide temperature range. Note Please check our store for other auto parts you may be interested in. Please feel free to contact us for whatever we can help with. Warranty: one year warranty for any manufacturing defect






...

Introductionma Xpeedingrods SP1 lowering coilover, standard with adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plate（for some vehicles) & decent outlook, offers you more ability to tune your suspension on performance & gives your vehicle more impressive appearance. Besides, all our coilover are assembled in dust-free factory, which turns out good quality & long life. Application Compatible for Honda CR-V 1996-2001 1st Gen. RD1-RD3compatible for FWD & AWDSpecification Front & Rear top mount: rubber Damping: 24 levels rebound damping adjustable Front spring rate: 10kg/mm (560 lbs/in) Rear spring rate:7 kg/mm (392 lbs/in) Adjustable

Height: Yes lowering 1" to 3" Shock type: Twin tube Spring Preload: 7-10 mm
Colour: black body with blue spring Package included Complete coilovers assembly 2 front & 2 rear A pair wrench for height adjustment Dimension Package dimension: 63*51*21 Weig...


...

Introductionma Xpeedingrods T6 lowering coilover, standard with adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plate（for some vehicles) & decent outlook, offers you more ability to tune your suspension on performance & gives your vehicle more impressive appearance. Besides, all our coilover are assembled in dust-free factory, which turns out good quality & long life. Application Compatible for Honda CR-V 1996-2001 1st Gen. RD1-RD3compatible for FWD & AWDSpecification Front & Rear top mount: rubber Damping: 24 levels rebound damping adjustable Front spring rate: 10kg/mm (560 lbs/in) Rear spring rate:7 kg/mm (392 lbs/in) Adjustable

Height: Yes lowering 1" to 3" Shock type: Twin tube Spring Preload: 7-10 mm
Colour: black body with blue spring Package included Complete coilovers assembly 2 front & 2 rear A pair wrench for height adjustment Dimension Package dimension: 63*51*21 Weigh...


...

Introduction Ma Xpeeding Rods T6 lowering coilover, standard with adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plate（for some vehicles) & decent outlook, offers you more ability to tune your suspension on performance & gives your vehicle more impressive appearance. Besides, all our coilover are assembled in dust-free factory, which turns out good quality & long life. Application Compatible for Honda Accord VII 4-door sedan CM4/CM5/CM6 2003-2007 Compatible for Honda Accord VII 2-door coupe CM7/CM8 2003-2007 Compatible for Honda Inspire 2003-2007 （ Japan market only） Specification Top mounts Front pillow ball top mounts Damping 24 levels rebound damping adjustable Adjustable height Yes, lowering 1" to 3" Adjustable camber plate No Spring rate Front 10 kg/mm (560 lbs/in) Spring rate Rear 6 kg/mm (336 lbs/in) Shock type Twin tube Spring Preload 7-10 mm... ...

Application Compatible for Audi Q7 2007-2015 compatible for Volkswagen Touareg 2004-2010OE/ Part number 7L0616214C, 7L0-616-214-C, 7L0616214B, 7L0616214D, 95534107620, 95534107621 Specification Location: Front Right (Passenger Side)
Colour: Black Terminal Quantity: 4 Pins
Material: Plastic & Metal Package included Height Level Sensor*1 Feature Premium Ride- Increases comfort & dynamic capability Fast Response- Restores the vehicle's ability to respond to road conditions Easy Installation- Direct fit for fast plug & play installation Stable performance & High reliability Meet Needs- Products are made from premium materials to ensure quality & satisfaction for our customers. Long Service Life- During each step of production multiple quality control checks are performed to insure each & every part lasts for years to come. Note Professional installation is highly recommended. Even if your car is shown in the compatibility, pls also double check the fitment details & photos before ordering.

...