Introduction MXR-B2 coil-overs are designed as entry-level for street use. It features height adjustable & adjustable camber plates (applicable for some vehicles), which offer you a lowered stance, & enhanced performance for your daily use vehicle. Application Compatible for Subaru Forester 2009-2013 3rd. Generation Specification Front top mount: Pillow ball with camber plate Rear top mount: Standard rubber Damping adjustable: Not available Height adjustable: Yes, lowering 25-75mm depending on the vehicle models Camber adjustable: Available, front only Spring Rate Front: 10 kg/mm (560 lbs/in) Spring Rate Rear: 8 kg/mm (448 lbs/in) Front spring inner diameter: 70.5mm Rear spring inner diameter: 70.5mm Spring length Front: 230 mm Spring length Rear: 200 mm Shock type: Twin tube Spring Preload advised: 7-10 mm
Colour: Golden body with black spring Package included Package included： 2x Front coil-overs 2x Rear coil-overs 2x C spanners Feature 1. Lowered height adjustment from 25-75mm (depends on...
...

Introduction MXR-B2 coil-overs are designed as entry-level for street use. It features height adjustable & adjustable camber plates (applicable for some vehicles), which offer you a lowered stance, & enhanced performance for your daily use vehicle. Application Compatible for Mitsubishi Lancer (CX/CY) 2008-2016, except Lancer Evolution compatible for Mitsubishi Outlander Sport (GA) 2011-2020 Specification Front top mount: Pillow ball with camber plate Rear top mount: OE top mount required Damping adjustable: Not available Camber adjustable: Available Height adjustable: Yes, lowering 25-75mm depending on the vehicle models Front Spring Rate: 9kg/mm (504 lbs/in) Rear Spring Rate: 6 kg/mm (336 in/lbs) Spring length Front: 180 mm Spring length Rear: 179 mm Spring Preload advised: 7-10 mm
Colour: Red body with black spring Package included Package included： 2 x Front coil-overs 2 x Rear coil-overs 2 x C spanners Dimension Package dimension: 63*51*20cm Weight: 24200g Feature 1. Lowered height adjustmen...
...

Introduction MXR-B2 series (also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible for TOYOTA COROLLA (E140) AZE141L XRS 2009-2010 Compatible for TOYOTA COROLLA (E140/E160) ZRE142L LE 2009-2013 Compatible for TOYOTA COROLLA (E150/E170) ZRE172L all 2014-2019 Compatible for TOYOTA MATRIX (E140)LE 2009-2014 Notice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Top mounts: pillow ball top mount with camber plate front, standard rubber top mount rear. Damping: No adjustable damper force. Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in) Spring length Front: 200mm Spring length Rear: 160mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 360mm-455mm Coilover overall length Rear: 313mm-370mm Shock type: Twin tube Spring Preload: 7-10 mm
Colour: gold Package includedproduct included: complete coilovers 2 front & 2 rear, a pair wrench for height adjustment. Dimension Gross weight: 26.04kg Package

Size: 62*51*21cm Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2. Camber plate top mounts help to eliminate the need for a separate camber kit.（ Only Front) 3. Pillow ball top mount
- It improves the steering feel & response.（ Only Front) 4. Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts. (Only Rear) 5. Twin-Tube structure allows sufficient stroke within the shock absorber. 6. Complete Suspension Kit of 4 Shock Absorbers 4 Springs for an easy installation. 7. Separate height adjustment does not affect damper stroke. 8. Height can be adjusted with coilovers installed on the vehicle. 9. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 10. Height Adjustment tools included. 11. Full rebuildable. Warranty: one year warranty for any manufacturing defect







...

Introduction Ma Xpeeding Rods-B2 series (also called Ma Xpeeding Rods-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible for TOYOTA COROLLA (E140) AZE141L XRS 2009-2010 Compatible for TOYOTA COROLLA (E140/E160) ZRE142L LE 2009-2013 Compatible for TOYOTA COROLLA (E150/E170) ZRE172L all 2014-2019 Compatible for TOYOTA MATRIX (E140)LE 2009-2014 Notice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Top mounts: pillow ball top mount with camber plate front, standard rubber top mount rear. Damping: No adjustable damper force. Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in) Spring length Front: 200mm Spring length Rear: 160mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 360mm...

...

Maxpeedingrods is a professional coilover manufacturer with 17 years industry experience. We have a professional technical & customer service team who can provide you technical support & after-sales service in time. Features 100%, Never Used or Installed Twin-Cylinder Design Adjustable Ride Height or Low Aggressive Spring Rates Aluminum Anodized top hat collars Aluminum Pillow Ball Upper Mount, Brackets Aluminum Front & Rear Bottom Mounts Fully anodized rust resistant sleeves. Twin-tube Coilovers 1. It is easier to secure sufficient stroke, because the oil & gas chambers are separated & not positioned serially. 2. The use of base valve enables to keep gas pressure low, allowing for a more comfortable ride. 3. Low gas pressure avoids stress on seals & keeps friction low. 4. Compared to the inverted type, friction can be suppressed. 5. Even if the shell compatible for case is slightly damaged, the function of the shock absorber remains unaffected. 6. Superior... ...

Introduction MXR-SNA coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application Compatible for Honda CR-V 1996-2001 1st Gen. RD1-RD3compatible for FWD & AWDSpecification Front & Rear top mount: rubber Spring rate: front 10kg/mm (560 lbs/in) rear 7 kg/mm (392 lbs/in) Adjustable

Height: Yes lowering 1" to 3" Shock type: Twin tube Spring Preload: 7-10 mm
Colour: gold body with black spring Package included Complete coilovers assembly 2 front & 2 rear A pair wrench for height adjustment Dimension Package dimension: 62*50*19 Weight: 23000g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance 2. Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard im...



...

Application Compatible For Jaguar XF (X250) RWD 2009-2015 without electronic suspension Note: Front fork is not compatible with AWD. Specification Quantity: 2 pieces front + 2 pieces rear, Spanner as shown in the picture Front Spring Rate: 10 kg/mm (Rear Spring Rate: 6kg/mm
Colour: Golden Damper: 24 ways Adjustable Damper Adjustable

Height: YESAdjustable Camber Plate: No Warranty: one year warranty for any manufacturing defect Features* Adjustable ride height.* Adjustable pre-load spring tension.* 24 levels of adjustable damper -- This allows you the ability to perfectly dial in your coilovers system. You can enjoy comfortable riding experience in all road conditions.* Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response.* Most components are made from 6061aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down.* Hi Tensile performance spring
- Under 600, 000 time...



...

Features Sway Bark End Links Included to Improves Suspension, Handling, Predictable Response, & even Prevents Premature Tire Wear Full Length Adjustment
- Lowers The Car Without Ruining Spring Tension Independent Spring Tension
- Custom Stiffness Without Change Ride Height 24 Clicks of Rebound Adjustments High Rigidity 55 Cr Si Steel Cold-bent Coil Springs Pillow-Ball Top Mount Provides Sharp & Precise Handling Anodized Shock Body With Anti-Corrosion Coating CNC Billet Aluminum Parts/ Hardware Full 1 Year Warranty From Date Of Purchase Applications Compatible for Honda civic VII DX/EX/GX/HX/LX/ Si Coupe (EM2) 2001-2005 Compatible for Honda civic VII DX/EX/GX/HX/LX/ Si Sedan (ES, ET) 2001-2005 NOTE： Not fit for Hybrid Specifications - Top mounts: Front pillow ball top mounts - Spring rate Front: 10kg/mm (560 lbs/in) - Spring rate Rear: 6kg/mm (336 lbs/in) - Coilover overall length Front: 450-580mm - Coilover overall length Rear: 355-370mm - Adjustable

Height:...



...

Application Compatible for Hyundai Sonata 2009 compatible for Hyundai Sonata 2010 compatible for Hyundai Sonata 2011 compatible for Hyundai Sonata 2012 compatible for Hyundai Sonata 2013 compatible for Hyundai Sonata 2014 compatible for Hyundai Sonata Hybrid 2011 compatible for Hyundai Sonata Hybrid 2012 compatible for Hyundai Sonata Hybrid 2013 compatible for Hyundai Sonata Hybrid 2014 compatible for Hyundai Sonata Hybrid 2015OE/ Part number 81970-3SA00 81250-3SA00 Specification
Material: Zinc Alloy Condition: New Placement on Vehicle： Left, Right, Front, Rear To Control： Ignition Switch & Door Actuator Type： Ignition Package included 1 x Ignition Switch Cylinder 1 x Trunk Lock 1 x Left Door Lock 2 x Key Feature 1. Reliable

Material: The fuel valve cylinder & key kit are made from sturdy & durable aluminum material, which is resistant to corrosion, rust, impact, & extended service life 2. Direct Replacement: Manufactured according to OE specifications & needs to be matched with the engine...


...

Application Compatible with compatible for Hyundai Sonata 2015-2019 Compatible with compatible for Hyundai Sonata Hybrid 2016-2019OE/ Part number 81970-C1A00 D2198058 81900-C1B00 Specification
Material: Zinc alloy Condition: New Quantity: As shown Package included 1 x Ignition Switch 1 x Trunk Lock 1 x Front Left Door Lock 1 x Glove Box Lock 2 x Universal Keys (This key is applicable to the above three types of lock cylinders). Feature 1.[ High quality] High-quality materials, exquisite workmanship, perfect transportation & storage ensure the high quality of products. 2.[ Strict testing] The product has undergone three quality inspections before manufacturing & distribution to ensure the integrity & accuracy of the product. Note Please read the product description carefully before purchasing to ensure this product is suitable for your vehicle
...