More From Contributor

$345
Introduction Maxpeedingrods-B3 is based on Maxpeedingrods-B2 coil-overs, which are also height adjustable. They are also made for street use, but the 24-level rebound damping control allows you the ability to perfectly dial in your coil-over setup. You will experience better ride quality in all road conditions. Application Compatible for SCION TC 1st Gen 2005-2010 USA ANT10 L Specification Front top mount: Pillow ball with camber plate Rear top mount: Standard rubber Damping adjustable: Available, 24 levels of rebound damping force Camber adjustable: Available Height adjustable: Yes, lowering 25-75mm depending on the vehicle models Spring Rate Front: 10 kg/mm (560lbs/in) Spring Rate Rear: 6 kg/mm (336lbs/in) Front spring inner diameter: 70.5 mm Rear spring inner diameter: 70.5 mm Spring length Front: 200 mm Spring length Rear: 160 mm Spring Preload advised: 7-10 mm
Colour: Red body with black spring Package included Package included: 2x Front coil-overs 2x Rear coil-overs 1x Allen wrench 2x C spa...
...
Available
$270
Introduction MXR-B3 is based on MXR-B2 coil-overs, which are also height adjustable. They are also made for street use, but the 24-level rebound damping control allows you the ability to perfectly dial in your coil-over setup. You will experience better ride quality in all road conditions. Application Compatible for TOYOTA COROLLA (E140) AZE141L XRS 2009-2010compatible for TOYOTA COROLLA (E140/E160) ZRE142L LE 2009-2013compatible for TOYOTA COROLLA (E150/E170) ZRE172L all 2014-2019compatible for TOYOTA MATRIX (E140)LE 2009-2014 Specification Front top mount: Pillow ball with camber plate Rear top mount: Standard rubber Damping adjustable: Available, 24 levels of rebound damping force Height adjustable: Yes, lowering 25-75mm depending on the vehicle models Camber adjustable: Available Spring rate Front: 7 kg/mm (392 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in) Front spring inner diameter: 70.5mm Rear spring inner diameter: 70.5mm Spring length Front: 200 mm Spring length Rear: 160 mm Spring Preload advi... ...
Available
$429.99
Introductionma Xpeedingrods T6 lowering coil-over, standard with adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plate(for some vehicles), & decent outlook, offers you more ability to tune your suspension on performance & gives your vehicle more impressive appearance. Besides, all our coil-overs are assembled in a dust-free factory, which turns out good quality & long life. Application Compatible for SUBARU IMPREZA WRX 2000.08-2007.06 GDA GD9 GGA compatible for SUBARU IMPREZA WRX STI 2000.10-2004.06 GDB (RIM P.C.D.=100) Compatible for Subaru Forester SG 2003-2008 compatible for SAAB 9-2X 2005-2007 GGA GGE Note: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Front top mount: Pillow ball with camber plate Rear top mount: Pillow ball Damping adjustable: Available, 24 levels of rebound damping force Camber adjustable: Available, fron... ...
Archived Product
$301
Introduction MXR-B2 coil-overs are designed as entry-level for street use. It features height adjustable & adjustable camber plates (applicable for some vehicles), which offer you a lowered stance, & enhanced performance for your daily use vehicle. Application Compatible for Subaru Forester 2009-2013 3rd. Generation Specification Front top mount: Pillow ball with camber plate Rear top mount: Standard rubber Damping adjustable: Not available Height adjustable: Yes, lowering 25-75mm depending on the vehicle models Camber adjustable: Available, front only Spring Rate Front: 10 kg/mm (560 lbs/in) Spring Rate Rear: 8 kg/mm (448 lbs/in) Front spring inner diameter: 70.5mm Rear spring inner diameter: 70.5mm Spring length Front: 230 mm Spring length Rear: 200 mm Shock type: Twin tube Spring Preload advised: 7-10 mm
Colour: Golden body with black spring Package included Package included: 2x Front coil-overs 2x Rear coil-overs 2x C spanners Feature 1. Lowered height adjustment from 25-75mm (depends on...
...
Available
$336
Introduction MXR-B2 coil-overs are designed as entry-level for street use. It features height adjustable & adjustable camber plates (applicable for some vehicles), which offer you a lowered stance, & enhanced performance for your daily use vehicle. Application Compatible for Mitsubishi Lancer (CX/CY) 2008-2016, except Lancer Evolution compatible for Mitsubishi Outlander Sport (GA) 2011-2020 Specification Front top mount: Pillow ball with camber plate Rear top mount: OE top mount required Damping adjustable: Not available Camber adjustable: Available Height adjustable: Yes, lowering 25-75mm depending on the vehicle models Front Spring Rate: 9kg/mm (504 lbs/in) Rear Spring Rate: 6 kg/mm (336 in/lbs) Spring length Front: 180 mm Spring length Rear: 179 mm Spring Preload advised: 7-10 mm
Colour: Red body with black spring Package included Package included: 2 x Front coil-overs 2 x Rear coil-overs 2 x C spanners Dimension Package dimension: 63*51*20cm Weight: 24200g Feature 1. Lowered height adjustmen...
...
Available
$305
Introduction Ma Xpeeding Rods-B2 series (also called Ma Xpeeding Rods-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible for TOYOTA COROLLA (E140) AZE141L XRS 2009-2010 Compatible for TOYOTA COROLLA (E140/E160) ZRE142L LE 2009-2013 Compatible for TOYOTA COROLLA (E150/E170) ZRE172L all 2014-2019 Compatible for TOYOTA MATRIX (E140)LE 2009-2014 Notice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Top mounts: pillow ball top mount with camber plate front, standard rubber top mount rear. Damping: No adjustable damper force. Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in) Spring length Front: 200mm Spring length Rear: 160mm Adjustable

Height:
lowering 1-3 inch Coilover overall length Front: 360mm...

...
Available
$338
Maxpeedingrods is a professional coilover manufacturer with 17 years industry experience. We have a professional technical & customer service team who can provide you technical support & after-sales service in time. Features 100%, Never Used or Installed Twin-Cylinder Design Adjustable Ride Height or Low Aggressive Spring Rates Aluminum Anodized top hat collars Aluminum Pillow Ball Upper Mount, Brackets Aluminum Front & Rear Bottom Mounts Fully anodized rust resistant sleeves. Twin-tube Coilovers 1. It is easier to secure sufficient stroke, because the oil & gas chambers are separated & not positioned serially. 2. The use of base valve enables to keep gas pressure low, allowing for a more comfortable ride. 3. Low gas pressure avoids stress on seals & keeps friction low. 4. Compared to the inverted type, friction can be suppressed. 5. Even if the shell compatible for case is slightly damaged, the function of the shock absorber remains unaffected. 6. Superior... ...
Available
$420
Introduction Ma Xpeeding Rods T7 series lowering coilover, are designed for daily street use & occassional track use. It features racing damping oil, an upgraded racing spring, height adjustable, & an adjustable camber plate (applicable for some vehicles), which offers you a lowered stance & enhanced handling. Application Compatible for Toyota Corolla E90 1987–1992 Compatible for Toyota Corolla E100 1991–1998 Compatible for Toyota Corolla E110 1995-2002 Compatible for Toyota Corolla AE92 1987-1991 Compatible for Toyota Corolla AE101 1992-1998 Compatible for Toyota Corolla AE111 1988-2002 Specification - Damping adjustable: Available, 24 ways damping force - Camber adjustable: Available, front only - Height adjustable: Yes, lowering 1-3 inches depending on the vehicle models - Spring Rate Front: 8kg/mm (448 lbs/in) - Spring Rate Rear: 6kg/mm (336 lbs/in) - Front spring inner diameter: 70.5mm - Rear spring inner diameter: 70.5mm - Spring length Front: 180mm - Spring length Rear... ...
Archived Product
$287
Introduction MXR-SNA coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application Compatible for Honda CR-V 1996-2001 1st Gen. RD1-RD3compatible for FWD & AWDSpecification Front & Rear top mount: rubber Spring rate: front 10kg/mm (560 lbs/in) rear 7 kg/mm (392 lbs/in) Adjustable

Height:
Yes lowering 1" to 3" Shock type: Twin tube Spring Preload: 7-10 mm
Colour: gold body with black spring Package included Complete coilovers assembly 2 front & 2 rear A pair wrench for height adjustment Dimension Package dimension: 62*50*19 Weight: 23000g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance 2. Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard im...



...
Available
$351
Application Compatible For Jaguar XF (X250) RWD 2009-2015 without electronic suspension Note: Front fork is not compatible with AWD. Specification Quantity: 2 pieces front + 2 pieces rear, Spanner as shown in the picture Front Spring Rate: 10 kg/mm (Rear Spring Rate: 6kg/mm
Colour: Golden Damper: 24 ways Adjustable Damper Adjustable

Height:
YESAdjustable Camber Plate: No Warranty: one year warranty for any manufacturing defect Features* Adjustable ride height.* Adjustable pre-load spring tension.* 24 levels of adjustable damper -- This allows you the ability to perfectly dial in your coilovers system. You can enjoy comfortable riding experience in all road conditions.* Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response.* Most components are made from 6061aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down.* Hi Tensile performance spring
- Under 600, 000 time...



...
Available

Full Coilovers Kits Compatible For Toyota Corolla 09-17 E140 E170 Adj.
Height Shocks Struts

IntroductionMXR-B2 series(also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable and adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, improved performance for your daily use vehicle. ApplicationCompatible for TOYOTA COROLLA(E140) AZE141L XRS 2009-2010 Compatible for TOYOTA COROLLA(E140/E160) ZRE142L LE 2009-2013 Compatible for TOYOTA COROLLA(E150/E170) ZRE172L all 2014-2019 Compatible for TOYOTA MATRIX (E140)LE 2009-2014Notice: The coilovers kit will "Lower your car" and does not keep to the original ride height. SpecificationTop mounts: pillow ball top mount with camber plate front, standard rubber top mount rear. Damping: No adjustable damper force. Spring rate Front: 10
kg/mm (560 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in) Spring length Front: 200mm Spring length Rear: 160mm Adjustable height: lowering 1-3 inch Coilover overall length Front: 360mm-455mm Coilover overall length Rear: 313mm-370mm Shock type: Twin tube Spring Preload: 7-10 mm Color: gold Package includedproduct included: complete coilovers 2 front and 2 rear, a pair wrench for height adjustment. DimensionGross weight: 26.04kg Package size: 62*51*21cm Feature1. Lowered height adjustment from 1" - 3" which allow lower center of gravity and also add a more aggressive stance. 2.Camber plate top mounts help to eliminate the need for a separate camber kit.(Only Front) 3.Pillow ball top mount - It improves the steering feel and response.(Only Front) 4. Rubber top mounts help to deliver a
smooth and forgiving ride for city use at any speed and rubber joints assist in absorbing hard impacts. (Only Rear) 5. Twin-Tube structure allows sufficient stroke within the shock absorber. 6. Complete Suspension Kit of 4 Shock Absorbers 4 Springs for an easy installation. 7. Separate height adjustment does not affect damper stroke. 8. Height can be adjusted with coilovers installed on the vehicle. 9. High Tensile performance spring - STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability and performance. 10. Height Adjustment tools included. 11. Full rebuildable.Warranty: one year warranty for any manufacturing defect
  • Click to be directed to retailers website:

    Buy

    Many items on our site can also be found here:

    Buy
    • External links may include paid for promotion
    Availability: In Stock
    $249

    Product Description

    Introduction MXR-B2 series (also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible for TOYOTA COROLLA (E140) AZE141L XRS 2009-2010 Compatible for TOYOTA COROLLA (E140/E160) ZRE142L LE 2009-2013 Compatible for TOYOTA COROLLA (E150/E170) ZRE172L all 2014-2019 Compatible for TOYOTA MATRIX (E140)LE 2009-2014 Notice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Top mounts: pillow ball top mount with camber plate front, standard rubber top mount rear. Damping: No adjustable damper force. Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in) Spring length Front: 200mm Spring length Rear: 160mm Adjustable

    Height:
    lowering 1-3 inch Coilover overall length Front: 360mm-455mm Coilover overall length Rear: 313mm-370mm Shock type: Twin tube Spring Preload: 7-10 mm
    Colour: gold Package includedproduct included: complete coilovers 2 front & 2 rear, a pair wrench for height adjustment. Dimension Gross weight: 26.04kg Package

    Size:
    62*51*21cm Feature 1. Lowered height adjustment from 1"
    - 3" which allow lower center of gravity & also add a more aggressive stance. 2. Camber plate top mounts help to eliminate the need for a separate camber kit.( Only Front) 3. Pillow ball top mount
    - It improves the steering feel & response.( Only Front) 4. Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts. (Only Rear) 5. Twin-Tube structure allows sufficient stroke within the shock absorber. 6. Complete Suspension Kit of 4 Shock Absorbers 4 Springs for an easy installation. 7. Separate height adjustment does not affect damper stroke. 8. Height can be adjusted with coilovers installed on the vehicle. 9. High Tensile performance spring
    - STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 10. Height Adjustment tools included. 11. Full rebuildable. Warranty: one year warranty for any manufacturing defect

    Reviews/Comments

    Add New

    Intelligent Comparison

    Oooops!
    We couldn't find anything!
    Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
    Click to bump this page and we'll hurry up.

    Price History

    Vouchers

    No voucher codes found.
    Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

    Facebook

    Jargon Buster

    Gold - A precious highly conductive metal
    Inch - Equivalent to approximately 2.5cm
    Warranty - A service provided by the retailer or manufacturer to ensure a device works for a period from new
    Stress - Also known as tension, a situation where a human can not cope with emotional or physical threats
    rubber - Synthetic rubber is any artificial elastomer, usually a polymer, and is used as a substitute for natural rubber.
    rubber - Natural rubber is an elastomer derived from the latex containing sap of some plants.
    vehicle - A manufactured device used to transport people or cargo.
    deliver - The method by which something is delivered fomr one location to another
    Pillow - A soft cushion support for the head used while sleeping or for support.
    Car - A machine used for transport which runs on roads
    weight - A measure of the force applied on an object by gravity. Measured metric in grams and kilos or imperial in lbs and oz
    speed - A measurement of how fast an object travels between two points
    200mm - The equivilent of 20cm
    Year - The time it takes the planet earth to orbit the sun. This takes around 365.25 days.
    Size - is the measurement of how big an object is in space.
    Gold - A colour, a type of rich metal. Chemical symbol AU.
    Warranty - A purchasers guarantee from the manufacturer for replacement/fix of goods when faulty.
    Adjustable - Something that can be changed or slightly modified to fit.
    Treatment - A way in which medics care for patients illnesses. A manner which someone behaves to someone else.
    Twin - A pair of people or animals that are born at the same time.
    Year - 365 days (366 days in a leap year), the time taken for planet earth to make one full revolution around the sun.
    Adjustable - Something that can be changed in order to fit better.
    Performance - When someone is presenting a form of entertainment, also how well someone is doing within a role.
    Joints - The sections where one component is joined to another.

    Supplier Information

    Maxpeeding Rods US
    Rev up your engine with Maxpeedingrods (https://www.maxpeedingrods.com/)! Explore a wide selection of high-performance auto parts and accessories at unbeatable prices. From turbochargers and connecting rods to coilovers and camshafts, we've got everything you need to boost your ride's power and style. With top-notch quality and expert engineering, our products are designed to maximize performance and reliability on the road or track. Whether you're a car enthusiast or a professional racer, trust Maxpeedingrods to take your driving experience to the next level. Shop now and unleash the full potential of your vehicle!
    Page Updated: 2026-01-20 12:40:53

    Community Generated Product Tags

    Oh No! The productWIKI community hasn't generated any tags for this product yet!
    Menu