Introduction MXR-SNA coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible for HONDA CIVIC 2012-2015 (FG3) USA 2 door coupe EXC. SI/EX/EX-L compatible for HONDA CIVIC 2012-2015 USA （FB2）4 door sedan EXC. SI compatible for ACURA ILX 2013-2015 USASpecification Top mounts: Front pillow ball top mount Damping: Not available Shock type: Twin tube Adjustable camber plate: Front only Spring preload: 7-10 mm Spring rate Front: 7 kg/mm (392 in/lbs) Spring rate Rear: 7 kg/mm (392 in/lbs) Spring length Front: 200mm Spring length Rear: 160mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 450mm-570mm Coilover overall length Rear: 535mm-580mm
Colour: Golden Package includedproduct included: complete coilovers 2 pieces front + 2 pieces rear, 2 x Spanners, 1 Pair Sway bar as shown in the picture Dimension
Size: 63*51*21 cm Weight: 25.28kg Feature Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. Twin-Tube structure allows sufficient stroke within the shock absorber. Pillow ball top mount
- It improves the steering feel & response. Camber plate top mounts help to eliminate the need for a separate camber kit. Separate height adjustment does not affect damper stroke. Height can be adjusted with coilovers installed on the vehicle. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. Height Adjustment tools included. Full rebuildable.






...

Application Compatible for Kia Optima 2011 2012 2013 2014 2015 Note: New sway bar link is required for SX trim

Specification-

...

Application Compatible for Kia Optima 2011 2012 2013 2014 2015 Note: New sway bar link is required for SX trim

Specification-

...

Introduction MXR-SLC based on MXR-SNA coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for SCION TC 1st Gen 2005-2010 USA ANT10L Specification Top mounts: front
- pillow ball top mount with camber plate Rear
- standard rubber top mount Damping: 24 levels rebound damping adjustable Spring rate: front 10 Kg/mm rear 6 Kg/mm Shock type: Twin tube
Colour: gold Package includedcomplete coilovers 2 front & 2 rear a pair wrench for height adjustment Dimensionweight: 28720g
Size: 63*51*21 cm Feature 1. Twin-Tube structure allows sufficient stroke within the shock absorber. 2. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus, the special surface treatment improves the durability & performance. 3. Height Adjustment tools included. 4. Pillow ball top mount
- It improves the steering feel & response. 5. Most pieces in our coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 6. Separate height adjustment does not affect damper stroke. 7. Full rebuildable. 8. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance 9. Camber plate top mounts help to eliminate the need for a separate camber kit. 10. A 24 rebound damping adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions.






...

Introduction Ma Xpeeding Rods-B3 series (also called Ma Xpeeding Rods-SLC) based on Ma Xpeeding Rods-B2 series (also called Ma Xpeeding Rods-SNA) coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for SCION TC 1st Gen 2005-2010 USA ANT10L Specification Top mounts: front
- pillow ball top mount with camber plate Rear
- standard rubber top mount Damping: 24 levels rebound damping adjustable Spring rate: front 10 Kg/mm rear 6 Kg/mm Shock type: Twin tube
Colour: gold Package includedcomplete coilovers 2 front & 2 rear a pair wrench for height adjustment Dimensionweight: 28720g
Size: 63*51*21 cm Feature 1. Twin-Tube structure allows sufficient stroke within the shock absorber. 2. High Tensile performance spring
- STRESS TES...




...

Introduction Ma Xpeeding Rods-B2 series (also called Ma Xpeeding Rods-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application Compatible for Mitsubishi Eclipse IV 2006–2012 (DK2A/DK4A) Compatible for Mitsubishi Galant (DJ) 2004-2012 Specification Top mounts： front camber plate rear rubber top mount Damping: not available Spring rate: front 7 kg/mm (392 lbs/in) rear 6 kg/mm (336 lbs/in) Adjustable

Height: Yes lowering 1" to 3" shock type: Twin tube spring Preload: 7-10 mm
Colour: gold body with black spring Package included Package included: complete coilover assemblies 2 front & 2 rear a pair of wrench for height adjustment Dimension Package dimension: 63*51*20 Weight: 23900g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stan...



...

Introduction Ma Xpeeding Rods-B2 series (also called Ma Xpeeding Rods-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application Compatible for Mitsubishi Eclipse IV 2006–2012 (DK2A/DK4A) Compatible for Mitsubishi Galant (DJ) 2004-2012 Specification Top mounts： front camber plate rear rubber top mount Damping: not available Spring rate: front 7 kg/mm (392 lbs/in) rear 6 kg/mm (336 lbs/in) Adjustable

Height: Yes lowering 1" to 3" shock type: Twin tube spring Preload: 7-10 mm
Colour: gold body with black spring Package included Package included: complete coilover assemblies 2 front & 2 rear a pair of wrench for height adjustment Dimension Package dimension: 63*51*20 Weight: 23900g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stan...



...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket adjustable coilovers suspension kit compatible for Honda Civic series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Honda Civic (EM2)2001
- 2005 Specifications Quantity:2 pieces front + 2 pieces rear as shown in the picture Top mounts: Front pillow ball top mounts Damping: 24 levels rebound damping adjustable Adjustable hight: Yes Adjustable camber plate: No Spring rate Front: 10kg/mm (560 lbs/in) Spring rate Rear: 6kg/mm (336 lbs/in) Adjustable

Height: Yes lowering 1" to 3" Shock type: Twin tube Spring Preload: 7-10 mm
Colour: Golden Features- Able to lower ride height by 1''-3''; allows user to have a more aggressive stance.- Coilovers are 24-way adjustable. Rebound & Dampening adjustment which allows the user the ability to dial in your coilovers to any driving needs. The user can enjoy a comfortable riding experience in all road conditions.- Twin-Tube Shock design is used for low internal frictional resistance in order to increase efficiency & keep shock temps low.- Height adjustment does not sacrifice damper stroke length.- These coilovers are able to have their height adjusted without being taken out of the car.- High Tensile strength performance spring---Tested under a 600, 000 time continuous compression test, the spring distortion was less than 0.04%. Plus, the special surface treatment improves the durability & performance.- Adjustment tools included in the kit. Notice- No instruction included; Professional installation is highly recommended.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.




...

Application For 2011-2016 compatible for Chevy Cruze 1.4L For 2016 compatible for Chevy Cruze Limited 1.4LOE/ Part number Coolant Bypass Hose Inlet Hose: 13251447, 13408385 Radiator Outlet Hose: 13251435 Radiator Inlet Hose: 13291779, 1337847, 95031564, 95181632 Heater Outlet Hose: 94543097 PCV Valve Tubing Hose with Bypass Valve Tube: 25193343, 55568267 Specification Items Included: Radiator Hose Type: Radiator Hose
Material: Rubber Placement on Vehicle: Upper, Lower, Inner, Outer
Features: Easy Installation Manufacturer Part Number: 13251447 13251435 13291779 94543097 25193343 OE/OEM Part Number: 13251447 13251435 13291779 94543097 25193343 Package included 1* Coolant Bypass Hose 1* Radiator Outlet Hose 1* Radiator Inlet Hose 1* Heater Outlet Hose 1*PCV Valve Tubing Hose with Bypass Valve Tube （ Showing as the picture） Feature New & High Performance Direct Replacement. Strict quality control standards to Build & test Look for compatibility list for fitment or just ask us.

...

Application Compatible for Polaris Ranger 900 XP 2013-2016 compatible for Polaris RZR XP 1000 2014-2018OE/ Part number 3022594, 3022523 Specification Condition: Brand New Type: Cylinder
Material: Ceramics Color： Silver Machine Type：UTV Height: 120mm Length: 273mm Width: 184mm Bore: 93mm Package included 1 x Cylinder (As the pictures shown) Feature 1. Promote combustion & provide enough horsepower. 2. Excellent heat dissipation, ensure for driving experience. 3. Wear resistance & heat resistance, long service life. 4. Meet & exceed original standard & fitment, direct replacement. Note 1. Fitment above is for reference only, please check the part number & the size of cylinder bore before you purchase. 2. Professional installation is highly recommended. 3. Please allow 1-3mm error due to manual measurement, thanks for understanding. 4. Please kindly understand that the actual color may slightly vary from presented pictures due to different monitor.
...