Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket height adjustable coilovers suspension kit compatible for Subaru series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Subaru Forester 2009-2013 3rd. Generation Specification Quantity: 2 piece front + 2 pieces rear Spring rate Front: 8 kg/mm (448 lbs/in) Spring rate Rear: 10kg/mm (560 lbs/in) Damper: Non adjustable damper Adjustable

Height: Yes Adjustable camber plate: Yes
Colour: Golden Warranty: one year warranty for any manufacturing defect Feature- Adjustable ride height- Adjustable pre-load spring tension- Pillow ball top mount -- this desig...



...

Applicationfor 2002-2006 compatible for Acura RSX & Type-S compatible for Honda Integra DC5 2001-2006 Specification Top mounts: Front pillow ball top mount Damping: Not available Shock type: Twin tube Adjustable

Height: Yes lowering 1'' to 3'' Adjustable camber plate: No Spring preload: 7-10 mm Spring rate Front: 8 kg/mm (448 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in)
Colour: Golden Package included Complete coilover assembly kit for front & rear A pair wrench for height adjustment Dimension Package dimension: 63*51*21 cm Weight: 22.38kg Feature Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts. Pillow ball top mount
- It improves the steering feel & response. Twin-Tube structure allows sufficient stroke within the shock absorber. Complete Suspension Kit of 4 Shock Absorbers & 4 Sprin...




...

Introduction MXR-SNA coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible For HONDA CIVIC 2012-2015 (FG3) USA 2 door coupe excluding Si model Compatible For HONDA CIVIC 2012-2015 (FB2) USA4 door sedan excluding Si model Specification Top mounts: Front pillow ball top mount Damping: Not available Shock type: Twin tube Adjustable camber plate: Front only Spring preload: 7-10 mm Spring rate Front: 7 kg/mm (392 in/lbs) Spring rate Rear: 7 kg/mm (392 in/lbs) Spring length Front: 200mm Spring length Rear: 160mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 450mm-570mm Coilover overall length Rear: 535mm-580mm
Colour: Golden Package includedproduct included: complete coilovers 2 pieces front + 2 pieces rear, 2 x Spanners, 1 Pair Sway bar as shown in the picture Dim...


...

Introduction MXR-SNA coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible For HONDA CIVIC 2012-2015 (FG3) USA 2 door coupe excluding Si model Compatible For HONDA CIVIC 2012-2015 (FB2) USA4 door sedan excluding Si model Specification Top mounts: Front pillow ball top mount Damping: Not available Shock type: Twin tube Adjustable camber plate: Front only Spring preload: 7-10 mm Spring rate Front: 7 kg/mm (392 in/lbs) Spring rate Rear: 7 kg/mm (392 in/lbs) Spring length Front: 200mm Spring length Rear: 160mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 450mm-570mm Coilover overall length Rear: 535mm-580mm
Colour: Golden Package includedproduct included: complete coilovers 2 pieces front + 2 pieces rear, 2 x Spanners, 1 Pair Sway bar as shown in the picture Dim...


...

Introduction MXR-SNA coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible for HONDA CIVIC 2012-2015 (FG3) USA 2 door coupe EXC. SI/EX/EX-L compatible for HONDA CIVIC 2012-2015 USA （FB2）4 door sedan EXC. SI compatible for ACURA ILX 2013-2015 USASpecification Top mounts: Front pillow ball top mount Damping: Not available Shock type: Twin tube Adjustable camber plate: Front only Spring preload: 7-10 mm Spring rate Front: 7 kg/mm (392 in/lbs) Spring rate Rear: 7 kg/mm (392 in/lbs) Spring length Front: 200mm Spring length Rear: 160mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 450mm-570mm Coilover overall length Rear: 535mm-580mm
Colour: Golden Package includedproduct included: complete coilovers 2 pieces front + 2 pieces rear, 2 x Spanners, 1 Pair Sway bar as shown in the picture Dimension
Size: 63*51*21 cm Weight: 25.28kg Feature Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. Twin-Tube structure allows sufficient stroke within the shock absorber. Pillow ball top mount
- It improves the steering feel & response. Camber plate top mounts help to eliminate the need for a separate camber kit. Separate height adjustment does not affect damper stroke. Height can be adjusted with coilovers installed on the vehicle. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. Height Adjustment tools included. Full rebuildable.






...

Application Compatible for Kia Optima 2011 2012 2013 2014 2015 Note: New sway bar link is required for SX trim

Specification-

...

Introduction MXR-SLC based on MXR-SNA coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for SCION TC 1st Gen 2005-2010 USA ANT10L Specification Top mounts: front
- pillow ball top mount with camber plate Rear
- standard rubber top mount Damping: 24 levels rebound damping adjustable Spring rate: front 10 Kg/mm rear 6 Kg/mm Shock type: Twin tube
Colour: gold Package includedcomplete coilovers 2 front & 2 rear a pair wrench for height adjustment Dimensionweight: 28720g
Size: 63*51*21 cm Feature 1. Twin-Tube structure allows sufficient stroke within the shock absorber. 2. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus, the special surface treatment improves the durability & performance. 3. Height Adjustment tools included. 4. Pillow ball top mount
- It improves the steering feel & response. 5. Most pieces in our coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 6. Separate height adjustment does not affect damper stroke. 7. Full rebuildable. 8. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance 9. Camber plate top mounts help to eliminate the need for a separate camber kit. 10. A 24 rebound damping adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions.






...

Introduction Ma Xpeeding Rods-B3 series (also called Ma Xpeeding Rods-SLC) based on Ma Xpeeding Rods-B2 series (also called Ma Xpeeding Rods-SNA) coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for SCION TC 1st Gen 2005-2010 USA ANT10L Specification Top mounts: front
- pillow ball top mount with camber plate Rear
- standard rubber top mount Damping: 24 levels rebound damping adjustable Spring rate: front 10 Kg/mm rear 6 Kg/mm Shock type: Twin tube
Colour: gold Package includedcomplete coilovers 2 front & 2 rear a pair wrench for height adjustment Dimensionweight: 28720g
Size: 63*51*21 cm Feature 1. Twin-Tube structure allows sufficient stroke within the shock absorber. 2. High Tensile performance spring
- STRESS TES...




...

Introduction MXR-B2 coil-overs are designed as entry-level for street use. It features height adjustable & adjustable camber plates (applicable for some vehicles), which offer you a lowered stance, & enhanced performance for your daily use vehicle. Application Compatible for Honda civic VII DX/EX/GX/HX/LX/ Si Coupe (EM2) 2001-2005 compatible for Honda civic VII DX/EX/GX/HX/LX/ Si Sedan (ES, ET) 2001-2005 NOTE： not fit for Hybrid Specification Front top mount: Pillow ball Rear top mount: Standard rubber Camber adjustable: Not available Damping adjustable: Not Available Height adjustable: Yes, lowering 25-75mm depending on the vehicle models Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in) Front spring inner diameter: 70.5 mm Rear spring inner diameter: 62 mm Spring length Front: 200 mm Spring length Rear: 140 mm Spring Preload advised: 7-10 mm
Colour: Blue body with black spring Package included Package included： 2x Front coil-overs 2x Rear coil-overs 2x C spann...
...

Introduction Ma Xpeeding Rods-B2 series (also called Ma Xpeeding Rods-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application Compatible for Mitsubishi Eclipse IV 2006–2012 (DK2A/DK4A) Compatible for Mitsubishi Galant (DJ) 2004-2012 Specification Top mounts： front camber plate rear rubber top mount Damping: not available Spring rate: front 7 kg/mm (392 lbs/in) rear 6 kg/mm (336 lbs/in) Adjustable

Height: Yes lowering 1" to 3" shock type: Twin tube spring Preload: 7-10 mm
Colour: gold body with black spring Package included Package included: complete coilover assemblies 2 front & 2 rear a pair of wrench for height adjustment Dimension Package dimension: 63*51*20 Weight: 23900g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stan...



...