Introductionma Xpeedingrods T7 lowering coil-overs are designed for daily street use & occasional track use. It features racing damping oil, an upgraded racing spring, height adjustable, & an adjustable camber plate (applicable for some vehicles), which offers you a lowered stance & enhanced handling. Application Compatible for Nissan S13 240SX 89-94 USACompatible for Nissan S13 200SX 89-93 Europe Compatible for Nissan S13 Silvia 88-93 Japan Compatible for Nissan S13 180SX 89-99 Japan Compatible for Nissan S13 Sileighty 98 Japan Specification Damping adjustable: Available, 24 ways damping force Camber adjustable: Available Height adjustable: Yes, lowering 1-3 inches depending on the vehicle models Spring Rate Front: 8kg/mm (448 lbs/in) Spring Rate Rear: 7kg/mm (392 lbs/in) Front spring inner diameter: 70.5mm Rear spring inner diameter: 70.5mm Spring length Front: 180mm Spring length Rear: 220mm Spring Preload advised: 7-10 mm
Colour: Black body with grey spring Warranty: one year warranty for any manu...
...

Introduction MXR-B2 series (also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application For 1990-1996 compatible for Nissan 300ZX Z32 3 door 2+2 coupe 3.0l V6 VG30DE RWD For 1990-1996 compatible for Nissan 300ZX Z32 3-door 2-seater coupé 3.0l V6 VG30DE RWD For 1990-1996 compatible for Nissan 300ZX Z32 convertible Twin Turbo VG30DETTSpecification Top mount: front & rear rubber Front spring rate:8 kg/mm (448 lbs/in) Rear spring rate:6 kg/mm (336 lbs/in) Adjustable

Height: Yes lowering 1" to 3" Spring Preload: 7-10 mm Shock type： Twin tube
Colour: gold body with black spring Package included Complete coilovers assembly 2 front & 2 rear A pair wrench for height adjustment Dimension Package dimension: 63*51*21 Weight: 22500g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance 2. Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts. 3. Twin-Tube structure allows sufficient stroke within the shock absorber. 4. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. 5. Separate height adjustment does not affect damper stroke. 6. Height can be adjusted with coilovers installed on the vehicle. 7. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 8. Height Adjustment tools included. 9. Most pieces in our coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 10. Steel shock bodies with special surface treatment to improve the durability. 11. Full rebuildable. Warranty: one year warranty for any manufacturing defect




...

Introduction MXR-SNA coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application For 1990-1996 compatible for Nissan 300ZX Z32 3 door 2+2 coupe 3.0l V6 VG30DE RWD For 1990-1996 compatible for Nissan 300ZX Z32 3-door 2-seater coupé 3.0l V6 VG30DE RWD For 1990-1996 compatible for Nissan 300ZX Z32 convertible Twin Turbo VG30DETTSpecification Top mount: front & rear rubber Front spring rate:8 kg/mm (448 lbs/in) Rear spring rate:6 kg/mm (336 lbs/in) Adjustable

Height: Yes lowering 1" to 3" Spring Preload: 7-10 mm Shock type： Twin tube
Colour: gold body with black spring Package included Complete coilovers assembly 2 front & 2 rear A pair wrench for height adjustment Dimension Package dimension: 63*51*21 Weight: 22500g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravit...



...

Application Compatible for Nissan/ Compatible for Datsun Sunny B210 A12 engine Specification Part Number :16010H160216010-H160216010 H1602 Type： Manual Choke Condition: New Accessories: You will get exactly as shown in the picture above Notice* Please confirm your old part number matches up with one of the part numbers above* Professional installation is highly recommended (No Instruction Included)* For any needs please contact us ...

Application Compatible for Nissan B210 A14 engine 1975-1978 compatible for Nissan Pulsar Base Hatchback 3DR/5DR 1983 Specification Part Number: 16010-W5600 16010 W5600 16010W5600 Condition: New Accessories: You will get exactly as shown in the picture above NOTE* Please confirm your old part number matches up with one of the part numbers above * Professional installation is highly recommended (No Instruction Included) * For any needs please contact us. Warranty: one year warranty for any manufacturing defect ...

Introductionma Xpeedingrods T6 lowering coil-over, standard with adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plate（for some vehicles), & decent outlook, offers you more ability to tune your suspension on performance & gives your vehicle more impressive appearance. Besides, all our coil-overs are assembled in a dust-free factory, which turns out good quality & long life. Application Compatible for Nissan Altima Sedan (L32) 2007
- 2012 Compatible for Nissan Altima Coupe (D32 ) 2008
- 2013 Compatible for Nissan Maxima Sedan (A35 ) 2009-2014 Specifications Damping adjustable: Available, 24 levels of rebound damping force Shock structure type: twin -tube Front top mount structure: Pillow ball Rear top mount structure: Rubber Camber adjustable: Not available Height adjustable: Yes, lowering 1-3 inches depending on the vehicle models Spring Rate Front: 8 kg/mm (448 lbs/in) Spring Rate Rear: 8...

...

Application For 2007
- 2012 compatible for Nissan Altima 2.5L Auto CVT Trans Engine Motor & Trans Mount Specifications- Reference
...

Application Compatible for Nissan Altima L4 2.5L 2004
- 2006 compatible for Nissan Altima V6 3.5L 2006 Specification Part Number:
...

Introduction Ma Xpeeding Rods-B3 series (also called Ma Xpeeding Rods-SLC) based on Ma Xpeeding Rods-B2 series (also called Ma Xpeeding Rods-SNA) coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for Nissan Altima Sedan (L32) 2007
- 2012 Compatible for Nissan Altima Coupe (D32 ) 2008
- 2013 Compatible for Nissan Maxima Sedan (A35 ) 2009-2014 Specification Top mounts: front pillow ball top mounts rear rubber top mount Damping: 24 ways Spring rate: front 8 kg/mm (448 lbs/in) Spring rate: rear 8 kg/mm (448 lbs/in) Adjustable

Height: Yes lowering 1'' to 3'' Shock type: Twin tube Spring Preload: 7-10 mm
Colour: gold Package includedcomplete coilovers 2 front 2 rear shocks & 2 rear springs a pair wrench for height a...




...

Introduction Ma Xpeeding Rods-B3 series (also called Ma Xpeeding Rods-SLC) based on Ma Xpeeding Rods-B2 series (also called Ma Xpeeding Rods-SNA) coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for Nissan Altima Sedan (L32) 2007
- 2012 Compatible for Nissan Altima Coupe (D32 ) 2008
- 2013 Compatible for Nissan Maxima Sedan (A35 ) 2009-2014 Specification Top mounts: front pillow ball top mounts rear rubber top mount Damping: 24 ways Spring rate: front 8 kg/mm (448 lbs/in) Spring rate: rear 8 kg/mm (448 lbs/in) Adjustable

Height: Yes lowering 1'' to 3'' Shock type: Twin tube Spring Preload: 7-10 mm
Colour: gold Package includedcomplete coilovers 2 front 2 rear shocks & 2 rear springs a pair wrench for height a...




...