Introduction Ma Xpeeding Rods-B3 series (also called Ma Xpeeding Rods-SLC) based on Ma Xpeeding Rods-B2 series (also called Ma Xpeeding Rods-SNA) coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible For Nissan 350Z Coupe RWD 2003-2008 (Z33) Compatible For Nissan 350Z Roadster Convertible RWD 2003-2008 (Z33) Compatible For Nissan Skyline Coupe RWD 2003-2007（V35) Compatible For Infiniti G35 Coupe RWD 2003-2007 (V35) Compatible For Infiniti G35 Sedan RWD 2003-2006 (V35) Note: Not for AWD models. Notice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Top mounts: pillow ball top mount front & rear. Damping: 24 levels rebound damping adjustable Front Spring Rate: 10kg/mm (56... ...

Introduction MXR-SNA coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application Compatible for Nissan 350Z Coupe RWD 2003-2008 (Z33) Compatible for Nissan 350Z Roadster Convertible RWD 2003-2008 (Z33) Compatible for Nissan Skyline Coupe RWD 2003-2007（V35) Compatible for Infiniti G35 Coupe RWD 2003-2007 (V35) Compatible for Infiniti G35 Sedan RWD 2003-2006 (V35) Note: Not for AWD models. Specification Top mounts: pillow ball top mount front & rear. Damping: No adjustable damper force Front Spring Rate: 10kg/mm (560 lbs/in). Rear Spring Rate: 7kg/mm (392 lbs/in). Adjustable

Height: Yes lowering 1" to 3". Shock type: Twin tube. Spring Preload: 7-10 mm.
Colour: gold Package includedproduct included: complete coilovers 2 front & 2 rear, a pair wrench for height adjustment. Dimension Gross weight: 25...


...

Application Compatible for INFINITI G37 SEDAN 2009-2015 V36USARWD only Compatible for INFINITI G37 COUPE 2008-2013 V36USA EXC 4WD Compatible for NISSAN 370Z 2009+Z34 USA Coupe & Roadster Compatible for NISSAN 370Z NISMO Z34 2009+USA NISMO COUPE（not for convertible） Specification Top mounts: pillow ball top mount front & rear. Damping: 24 levels rebound damping adjustable. Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Spring length Front: 230mm Spring length Rear: 200mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 500mm-600mm Coilover overall length Rear: 465mm-525mm Shock type: Twin tube. Spring Preload: 7-10 mm.
Colour: gold. Note： True Rear，not Divorced Rear (OEM Style) Package includedproduct included: complete coilovers 2 front & 2 rear, a pair wrench for height adjustment. Dimension Gross weight:23.68 kg Package
Size:63*50.5*20 cm Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & al...




...

Application Compatible for Nissan 720 pickup 2.4L Z24 engine 1983-1986 Compatible for Nissan Bluebird 1984- Compatible for Nissan Caravan 1986- Compatible for Nissan Compatible for Datsun Truck 1985- Compatible for Nissan Atras Truck 1990- Compatible for Nissan Vanette Panel Van 1986- Compatible for Nissan Pathfinder 1987-1988 2.4L 2389CC l 4 GAS Naturally Aspirated Compatible for Nissan Pathfinder Base Sport Utility 2-Door 1988 engine: 2.4L 2389CC l 4 GAS Naturally Aspirated Compatible for Nissan Pickup Base Standard Cab Pickup 2-Door 1995-2004 Compatible for Nissan 720 Base Standard Cab Pickup 2-Door 1983-1986 Compatible for Nissan Pickup Corto Cab Chassis 2-Door 1994 Compatible for Nissan Pickup Corto Standard Cab Pickup 2-Door 1994 Compatible for Nissan 720 Deluxe Cab Chassis 2-Door 1983-1986 Compatible for Nissan 720 Deluxe Extended Cab Pickup 2-Door 1983-1986 Compatible for Nissan 720 Deluxe Standard Cab Pickup 2-Door 1983-1986 Compatible for Nissan Pickup Doble Cab Crew Cab Pickup 4-Door 1994 Compatible for Nissan Pathfinder E Sport Utility 2-Door 1987 Compatible for Nissan Pickup Estacas Standard Cab Pickup 2-Door 1994 Compatible for Nissan Pickup Largo Cab Chassis 2-Door 1994 Compatible for Nissan Pickup Lujo Crew Cab Pickup 4-Door 2000-2004 Compatible for Nissan Pickup Lujo Standard Cab Pickup 2-Door 1996-2000 Compatible for Nissan Pickup Lujo Crew Cab Pickup 4-Door 1995 Compatible for Nissan Pickup Largo Standard Cab Pickup 2-Door 1994 Compatible for Nissan Pickup SE Extended Cab Pickup 2-Door 1996-1997 Compatible for Nissan 720 Sport Truck Extended Cab Pickup 2-Door 1985-1986 Compatible for Nissan 720 Sport Truck Standard Cab Pickup 2-Door 1985-1986 Compatible for Nissan Pickup Tipico Crew Cab Pickup 4-Door 1995-2004 Compatible for Nissan Pickup Tipico Plus Crew Cab Pickup 4-Door 1997 Compatible for Nissan Pickup XE Extended Cab Pickup 2-Door 1995-1997 Compatible for Nissan Pickup XE Standard Cab Pickup 2-Door 1995-1997 engine: 2.4L 2389CC l 4 GAS SOHC Naturally Aspirated Specifications Type: Automatic Choke
Material: Heavy duty zinc alloy construction Specific: 2 Barrel Input voltage: DC 12 V Package
Includes::1* 2-barrel carb Placement: The intake pipe between the air filter & the engine of the car Weight: 2.5kgs Package

Size: 24*21*18CMFeature 1、 Car Carburetor for Engine improve throttle response for better engine performance, add 5~10% horsepower & maintain near stock fuel mileage.2、 Great solution to poorly running engines caused by a worn out carburetor. Great remedy to old & crispy fuel injection gone haywire.3、 Factory carburetors can suffer from leaking throttle shaft bushings or gummed up vacuum & fuel passages.4、one year warranty for any manufacturing defects.5、 Direct Fit, No Modification Needed.6、 Excellent quality, based on reliable materials & craftsmanship. Notice* Please clean up the oil channels & air filters as well as use the clean fuel before installing the carburetors.* Please confirm your OEM number & car engine matches up with the description above.* No instruction included & professional installation recommended.



...

Application Compatible For Nissan 720 pickup 2.4L Z24 engine 1983-1986 Compatible For Nissan Bluebird 1984-Compatible For Nissan Caravan 1986-Compatible For Nissan Compatible For Datsun Truck 1985-Compatible For Nissan Atras Truck 1990-Compatible For Nissan Vanette Panel Van 1986-Compatible For Nissan Pathfinder 1987-1988 Compatible For Nissan Pathfinder Base Sport Utility 2-Door 1988engine: 2.4L 2389CC l 4 GAS Naturally Aspirated Compatible For Nissan Pickup Base Standard Cab Pickup 2-Door 1995-2004 Compatible For Nissan 720 Base Standard Cab Pickup 2-Door 1983-1986 Compatible For Nissan Pickup Corto Cab Chassis 2-Door 1994 Compatible For Nissan Pickup Corto Standard Cab Pickup 2-Door 1994 Compatible For Nissan 720 compatible for Deluxe Cab Chassis 2-Door 1983-1986 Compatible For Nissan 720 compatible for Deluxe Extended Cab Pickup 2-Door 1983-1986 Compatible For Nissan 720 compatible for Deluxe Standard Cab Pickup 2-Door 1983-1986 Compatible For Nissan Pickup Doble Cab Crew Cab Pickup 4-Door 1... ...

Introduction MXR-B2 series (also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application For 1990-1996 compatible for Nissan 300ZX Z32 3 door 2+2 coupe 3.0l V6 VG30DE RWD For 1990-1996 compatible for Nissan 300ZX Z32 3-door 2-seater coupé 3.0l V6 VG30DE RWD For 1990-1996 compatible for Nissan 300ZX Z32 convertible Twin Turbo VG30DETTSpecification Top mount: front & rear rubber Front spring rate:8 kg/mm (448 lbs/in) Rear spring rate:6 kg/mm (336 lbs/in) Adjustable

Height: Yes lowering 1" to 3" Spring Preload: 7-10 mm Shock type： Twin tube
Colour: gold body with black spring Package included Complete coilovers assembly 2 front & 2 rear A pair wrench for height adjustment Dimension Package dimension: 63*51*21 Weight: 22500g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance 2. Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts. 3. Twin-Tube structure allows sufficient stroke within the shock absorber. 4. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. 5. Separate height adjustment does not affect damper stroke. 6. Height can be adjusted with coilovers installed on the vehicle. 7. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 8. Height Adjustment tools included. 9. Most pieces in our coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 10. Steel shock bodies with special surface treatment to improve the durability. 11. Full rebuildable. Warranty: one year warranty for any manufacturing defect




...

Introduction MXR-SNA coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application For 1990-1996 compatible for Nissan 300ZX Z32 3 door 2+2 coupe 3.0l V6 VG30DE RWD For 1990-1996 compatible for Nissan 300ZX Z32 3-door 2-seater coupé 3.0l V6 VG30DE RWD For 1990-1996 compatible for Nissan 300ZX Z32 convertible Twin Turbo VG30DETTSpecification Top mount: front & rear rubber Front spring rate:8 kg/mm (448 lbs/in) Rear spring rate:6 kg/mm (336 lbs/in) Adjustable

Height: Yes lowering 1" to 3" Spring Preload: 7-10 mm Shock type： Twin tube
Colour: gold body with black spring Package included Complete coilovers assembly 2 front & 2 rear A pair wrench for height adjustment Dimension Package dimension: 63*51*21 Weight: 22500g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravit...



...

Application Compatible for Nissan/ Compatible for Datsun Sunny B210 A12 engine Specification Part Number :16010H160216010-H160216010 H1602 Type： Manual Choke Condition: New Accessories: You will get exactly as shown in the picture above Notice* Please confirm your old part number matches up with one of the part numbers above* Professional installation is highly recommended (No Instruction Included)* For any needs please contact us ...

Application Compatible for Nissan B210 A14 engine 1975-1978 compatible for Nissan Pulsar Base Hatchback 3DR/5DR 1983 Specification Part Number: 16010-W5600 16010 W5600 16010W5600 Condition: New Accessories: You will get exactly as shown in the picture above NOTE* Please confirm your old part number matches up with one of the part numbers above * Professional installation is highly recommended (No Instruction Included) * For any needs please contact us. Warranty: one year warranty for any manufacturing defect ...

Introductionma Xpeedingrods T6 lowering coil-over, standard with adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plate（for some vehicles), & decent outlook, offers you more ability to tune your suspension on performance & gives your vehicle more impressive appearance. Besides, all our coil-overs are assembled in a dust-free factory, which turns out good quality & long life. Application Compatible for Nissan Altima Sedan (L32) 2007
- 2012 Compatible for Nissan Altima Coupe (D32 ) 2008
- 2013 Compatible for Nissan Maxima Sedan (A35 ) 2009-2014 Specifications Damping adjustable: Available, 24 levels of rebound damping force Shock structure type: twin -tube Front top mount structure: Pillow ball Rear top mount structure: Rubber Camber adjustable: Not available Height adjustable: Yes, lowering 1-3 inches depending on the vehicle models Spring Rate Front: 8 kg/mm (448 lbs/in) Spring Rate Rear: 8...

...