Introductionma Xpeedingrods T7 coil-overs are designed for daily street use & Junior track use. It features racing damping oil, an upgraded racing spring, height adjustable, & an adjustable camber plate (applicable for some vehicles), which offers you a lowered stance & enhanced handling. Application Compatible For MAZDA MX-5 I (NA) (09/1989-04/1998) Compatible For MAZDA MX-5 II (NB) (01/1998-10/2005) Compatible For Mazda Miata MX-5 NA (1.6L, 1.8L) 1989-1997 Compatible For Mazda Miata MX-5 NB (1.6L, 1.8L) 1998- 2005 Compatible For Mazda Miata Base Convertible 2D 1990-1997 Compatible For Mazda Miata Base Convertible 2D 1999-2005 Compatible For Mazda Miata SE Convertible 2D 2000-2003 Compatible For Mazda Miata LE Convertible 2D 1993 Compatible For Mazda Miata M Edition Convertible 2D 1994-1997 Compatible For Mazda Miata STO Convertible 2D 1997 Compatible For Mazda Miata 10th Anniversary Convertible 2D 1999 Compatible For Mazda Miata LS Convertible 2D 2000-2005 Specification Damping adjustable: Avail... ...

Instructionma Xpeedingrods T6 series lowering coilover, standard with adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plate（for some vehicles) & decent outlook, offers you more ability to tune your suspension on performance & gives your vehicle more impressive appearance. Besides, all our coilover are assembled in dust-free factory, which turns out good quality & long life. Application Compatible For MAZDA MX-5 I (NA) (09/1989-04/1998) Compatible For MAZDA MX-5 II (NB) (01/1998-10/2005) Compatible For Mazda Miata MX-5 NA (1.6L, 1.8L) 1989-1997 Compatible For Mazda Miata MX-5 NB (1.6L, 1.8L) 1998- 2005 Compatible For Mazda Miata Base Convertible 2D 1990-1997 Compatible For Mazda Miata Base Convertible 2D 1999-2005 Compatible For Mazda Miata SE Convertible 2D 2000-2003 Compatible For Mazda Miata LE Convertible 2D 1993 Compatible For Mazda Miata M Edition Convertible 2D 1994-1997 Compatible For... ...

Introduction Ma Xpeeding Rods-B3 series (also called Ma Xpeeding Rods-SLC) based on Ma Xpeeding Rods-B2 series (also called Ma Xpeeding Rods-SNA) coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for MAZDA MX-5 II (NB) (01/1998-10/2005) Compatible for compatible for Mazda Miata MX-5 NA (1.6L, 1.8L) 1989-1997 Compatible for compatible for Mazda Miata MX-5 NB (1.6L, 1.8L) 1998- 2005 Compatible for compatible for Mazda Miata Base Convertible 2D 1990-1997 Compatible for compatible for Mazda Miata Base Convertible 2D 1999-2005 Compatible for compatible for Mazda Miata SE Convertible 2D 2000-2003 Compatible for compatible for Mazda Miata LE Convertible 2D 1993 Compatible for compatible for Mazda Miata M Edition Convertible 2D 199... ...

Application Compatible for Mazda B6 1.6 / B6F Engine: Compatible for Mazda 323 BG / 323F BG models B6F 1989-1994 Compatible for Mazda Miata /MX-5 B6 1.6 16-valve DOHC1989-1993 Compatible for Mazda Xedos 6 / Eunos 500 1.6 L B6-9/B6-E I4 1992–1999 Compatible for Kia Mentor / Shuma / Spectra 1.6 L B6 I4 1997–2003 Compatible for Kia Rio First generation 1.6 L B6 I4 (petrol) 1999–2005 Compatible for Mazda Familia / 323 1.6 L B6 I4 1985–1989 Compatible for Ford Tonic GT-X Fifth Generation 1985–1989 Compatible for Mazda Familia / 323 1.6 L B6 I4 Sixth generation 1989–1994 Compatible for Mazda BP 1.8 Engine: Compatible for Mazda Familia GT (European & Australian Market) 1989-1994 Compatible for Ford Laser TX3 (Australian Market)1989-1994 Compatible for Ford Laser KJ GLXi (Australian Market)1994-1998 Compatible for Mazda Artis "LX" VICS jm 1 (North America Market)1994-1998 Compatible for Mazda Protege LX (with VICS)1990-1994 Compatible for Mazda Protege ES (Australian Market: 1994-1998 )1995-1998 Compatib... ...

Introduction MXR-SLC based on MXR-SNA coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24-level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for Mazda 323 1999-2003 Compatible for Mazda Protegé 1999-2003 Compatible for Mazda Protegé5 1999-2003 Compatible for Mazdaspeed Protegé 1999-2003 Compatible for Mazda Isamu Genki (Taiwan) 1999-2003 Compatible for Mazda Allegro 1999-2003 Compatible for Ford Activa 1999-2003 Compatible for Ford Laser (KN/KQ) 1999-2003 Compatible for Ford Tierra 1999-2003 for Haima Family (China) 1999-2003 for Haima Happin (China) 1999-2003 Specification Top mounts: front pillow ball top mount with camber plate rear pillow ball top mount Damping: 24 levels rebound damping adjustable Spring rate Rear: 6 kg/mm (336 lbs/in) Spring length Front: 200mm Spring length Rear: 230mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 420mm-520mm Coilover overall length Rear: 520mm-620mm Shock type: Twin tube Spring Preload: 7-10 mm
Colour: gold Package includedcomplete coilovers 2 front & 2 rear a pair wrench for height adjustment Dimensionweight: 30060g
Size: 63*50*20 cm Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance 2. A 24 rebound damping adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. 3. Twin-Tube structure allows sufficient stroke within the shock absorber. 4. Separate height adjustment does not affect damper stroke. 5. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus, the special surface treatment improves the durability & performance. 6. Height Adjustment tools included. 7. Camber plate top mounts help to eliminate the need for a separate camber kit. 8. Pillow ball top mount
- It improves the steering feel & response. 9. Most pieces in our coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 10. Full rebuildable.






...

Introductionma Xpeedingrods T6 lowering coil-over, standard with adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plate（for some vehicles), & decent outlook, offers you more ability to tune your suspension on performance & gives your vehicle more impressive appearance. Besides, all our coil-overs are assembled in a dust-free factory, which turns out good quality & long life. Application Compatible For Mazda RX-7/ Compatible for Mazda Savanna RX-7 second generation FC3S 1985–19922 door coupe/2 door convertible Specification Damping adjustable: Available, 24 levels of rebound damping force Shock structure type: twin -tube Front top mount structure: Pillow ball with camber plate Rear top mount structure: Pillow ball Camber adjustable: Available Height adjustable: Yes, lowering 25-75mm depending on the vehicle models Spring Rate Front: 10 kg/mm (560 lbs/in) Spring Rate Rear: 8 kg/mm (448 lbs/in)F... ...

Application Compatible for Mazda RX7 FC FC3S 1986-1991 Specification Quantity: 2 pieces front + 2 pieces rear as shown Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 8 kg/mm (448 lbs/in)​ Adjustable Damper: Non adjustable Damper Adjustable

Height: Yes Adjustable camber plate: Yes
Colour: Red Warranty: one year warranty for any manufacturing defect Feature* Adjustable ride height * Adjustable pre-load spring tension * Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response * Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down. * Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance. * All inserts come with fitted rubber boots to protect the damper & keep clean. * Improve...



...

Introduction MXR-SNA coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application Compatible for Mazda RX-7/ Compatible for Mazda Savanna RX-7 second generation FC3S 1985–1992 2 door coupe/2 door convertible Specification Top mount: Front camber plate；rear pillow ball Damping:not available Spring rate Front:10 kg/mm (560 lbs/in) Spring rate Rear: 8 kg/mm (448 lbs/in)​ Adjustable

Height: lowering 1-3 inch Shock type: Twin tube Spring Preload: 7-10 mm
Colour: gold body with black spring Package included Complete coilover assembly kit for front & rear A pair wrench for height adjustment Dimension Package dimension: 63*51*21 Weight: 25560g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2. Camber plate top mounts help to elimina...



...

Application Compatible for Mercedes Benz S-Class W221 Compatible for Mercedes S350 Bluetec 4 Matic Sedan 4-Door 3.0L 2012-2013 Compatible for Mercedes S450 4 Matic Sedan 4-Door 4.6L 2008-2011 Compatible for Mercedes S550 4 Matic Sedan 4-Door 4.6L 2012-2013 Compatible for Mercedes S550 4 Matic Sedan 4-Door 5.5L 2007-2011 Compatible for Mercedes Benz CL-Class C216 Compatible for Mercedes CL550 4 Matic Coupe 2-Door 4.6L 2011-2013 Compatible for Mercedes CL550 4 Matic Coupe 2-Door 5.5L 2009-2010 Compatible for S-Class Vehicles With 4MATIC (AWD) Suspension Only.NOT fit on Vehicles Equipped with Base RWD or ABC Suspension Models OE/OEM Number 2213200438, 221 320 04 38, A2213200438, A221 320 04 38, 2213205313, 221 320 53 13, A2213205313, A221 320 53 13, 2213201738, 221 320 17 38, A2213201738, A221 320 17 38, 221320173880, 221 320 17 38 80, A221320173880, A221 320 17 38 80, 221320173860, 221 320 17 38 60, A221320173860, A221 320 17 38 60, 221320173888, 221 320 17 38 88, A221320173888, A221 320 17 38 88, 221320043880, 221 320 04 38 80, A221320043880, A221 320 04 38 80, 221320043860, 221 320 04 38 60, A221320043860, A221 320 04 38 60, 221320043888, 221 320 04 38 88, A221320043888, A221 320 04 38 88, 221320531360, 221 320 53 13 60, A221320531360, A221 320 53 13 60, 221320531380, 221 320 53 13 80, A221320531380, A221 320 53 13 80, 221320531388, 221 320 53 13 88, A221320531388, A221 320 53 13 88 Specifications Condition: New Fitment Type: Direct Replacement Quantity: 1 piece  (for Front Left) Placement on Vehicle:for front left Driver's side Greasable or Sealed: sealed Adjustable: yes Length, width & height (in/cm):33*8*7.9 /84*20.5*20 Weight: 9.1KGStroke:70mm Operating Pressure: ≤2.0 Mpa Temperature range：+70°、-40° Feature 1. 100% Air Tightiness testing 2. 24 hours air tightness test ≤0.02 M Pa 3. Anti-corrosion & provide a more consistent wear surface 4. Built to strict quality control standards 5. CNC Machined Components 6. Designed for Comfort Suspension 7. Direct replacement for OEM strut without modification 8. Easy to install 9. Eliminating abnormal sound 10. Gives the driver more control of ride 11. Good heat dissipation 12. It has a high compressive strength & good sound insulation to ensure our driving comfort & safety 13. Restore the original ride height & improve ride quality 14. Test more than 3 million times 15. Sturdy & Durable Material Notice 1. These air suspensions are aftermarket ones. They will replace the original air shock absorber. Please double confirm the compatibility as well as the OEM number before purchasing.2. The best way to check compatibility is to check the Part Number on your old unit.3. Professional installation is recommended.4. If there is any question, please contact us. ...

Application Compatible for Mercedes Benz S-Class W221 Compatible for Mercedes S350 Bluetec 4 Matic Sedan 4-Door 3.0L 2012-2013 Compatible for Mercedes S450 4 Matic Sedan 4-Door 4.6L 2008-2011 Compatible for Mercedes S550 4 Matic Sedan 4-Door 4.6L 2012-2013 Compatible for Mercedes S550 4 Matic Sedan 4-Door 5.5L 2007-2011 Compatible for Mercedes Benz CL-Class C216 Compatible for Mercedes CL550 4 Matic Coupe 2-Door 4.6L 2011-2013 Compatible for Mercedes CL550 4 Matic Coupe 2-Door 5.5L 2009-2010 Compatible for S-Class Vehicles With 4MATIC (AWD) Suspension Only.NOT fit on Vehicles Equipped with Base RWD or ABC Suspension Models OE/OEM Number 2213200438, 221 320 04 38, A2213200438, A221 320 04 38, 2213205313, 221 320 53 13, A2213205313, A221 320 53 13, 2213201738, 221 320 17 38, A2213201738, A221 320 17 38, 221320173880, 221 320 17 38 80, A221320173880, A221 320 17 38 80, 221320173860, 221 320 17 38 60, A221320173860, A221 320 17 38 60, 221320173888, 221 320 17 38 88, A221320173888, A221 320 17 38 88, 221320043880, 221 320 04 38 80, A221320043880, A221 320 04 38 80, 221320043860, 221 320 04 38 60, A221320043860, A221 320 04 38 60, 221320043888, 221 320 04 38 88, A221320043888, A221 320 04 38 88, 221320531360, 221 320 53 13 60, A221320531360, A221 320 53 13 60, 221320531380, 221 320 53 13 80, A221320531380, A221 320 53 13 80, 221320531388, 221 320 53 13 88, A221320531388, A221 320 53 13 88 Specifications Condition: New Fitment Type: Direct Replacement Quantity: 1 piece  (for Front Left) Placement on Vehicle:for front left Driver's side Greasable or Sealed: sealed Adjustable: yes Length, width & height (in/cm):33*8*7.9 /84*20.5*20 Weight: 9.1KGStroke:70mm Operating Pressure: ≤2.0 Mpa Temperature range：+70°、-40° Feature 1. 100% Air Tightiness testing 2. 24 hours air tightness test ≤0.02 M Pa 3. Anti-corrosion & provide a more consistent wear surface 4. Built to strict quality control standards 5. CNC Machined Components 6. Designed for Comfort Suspension 7. Direct replacement for OEM strut without modification 8. Easy to install 9. Eliminating abnormal sound 10. Gives the driver more control of ride 11. Good heat dissipation 12. It has a high compressive strength & good sound insulation to ensure our driving comfort & safety 13. Restore the original ride height & improve ride quality 14. Test more than 3 million times 15. Sturdy & Durable Material Notice 1. These air suspensions are aftermarket ones. They will replace the original air shock absorber. Please double confirm the compatibility as well as the OEM number before purchasing.2. The best way to check compatibility is to check the Part Number on your old unit.3. Professional installation is recommended.4. If there is any question, please contact us. Warranty: one year warranty for any manufacturing defect ...