Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket height adjustable coilovers suspension kit for Inifinit series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Inifinit M35x 06-10 AWDCompatible for Inifinit M45x 06-10 AWDCompatible for Inifinit G35x 03-08 AWDCompatible for Inifnit G37x 08-13 AWDNote: Will not fit RWD model Note： Rear shock absorption is not split Specification Top mounts: standard rubber top mount front & rear Quantity: 2 piece front + 2 pieces rear Spring rate Front: 12kg/mm (672 lbs/in) Spring rate Rear: 10kg/mm (560 lbs/in) Shock type: Twin tube Adjustable Damper: Non-ad...
...

Introduction Ma Xpeeding Rods-B2 series (also called Ma Xpeeding Rods-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible for TOYOTA ALTEZZA AS200 1998.10-2005.07JPN GXE10 compatible for TOYOTA ALTEZZA RS200 1998.10-2005.07JPNSXE10 compatible for LEXUS IS300 2000-2005 USA JCE10L （INCL SPORTS CROSS (5DR) ） Compatible for LEXUS IS 200 1999.4
- 2005.7 GXE10（INCL SPORTS CROSS (5DR) ） Compatible for TOYOTA MARK II 2000.10-2004.11 JPN JZX110 GRANDE IR-V, GRANDE G-TB compatible for TOYOTA MARK II BLIT 2002.01-2007.05JPN JZX110W 2.5IR-V, 2.5IR-SSpecification Top mounts: rubber top mounts Damping: not available Spring rate: front 12kg/mm Spring rate: rear 10kg/mm Adjustable

Height: Yes lowering 1'' to 3'' Shock type: Twin tube Spring Preload: 7-10 mm
Colour: gold Package included...



...

Introduction MXR-SNA coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible for TOYOTA ALTEZZA AS200 1998.10-2005.07JPN GXE10 compatible for TOYOTA ALTEZZA RS200 1998.10-2005.07JPNSXE10 compatible for LEXUS IS300 2000-2005 USA JCE10L （INCL SPORTS CROSS (5DR) ） Compatible for LEXUS IS 200 1999.4
- 2005.7 GXE10（INCL SPORTS CROSS (5DR) ） Compatible for TOYOTA MARK II 2000.10-2004.11 JPN JZX110 GRANDE IR-V, GRANDE G-TB compatible for TOYOTA MARK II BLIT 2002.01-2007.05JPN JZX110W 2.5IR-V, 2.5IR-SSpecification Top mounts: rubber top mounts Damping: not available Spring rate: front 12kg/mm Spring rate: rear 10kg/mm Adjustable

Height: Yes lowering 1'' to 3'' Shock type: Twin tube Spring Preload: 7-10 mm
Colour: gold Package includedcomplete coilovers 2 front & 2 rear a pair wren...



...

Introduction MXR-SNA coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application Compatible for ACURA TL IIUA5 1999-2003 USA including type s compatible for ACURA CL II YA42001-2003 USA compatible for HONDA ACCORD VI 4-door sedan CG1 CG5 CG6 1998-2002 USA compatible for HONDA ACCORD VI 2-door coupe CG2 CG31998-2002 USASpecification Front & Rear top mount: rubber spring rate: front 10kg/mm (560 lbs/in) rear 6 kg/mm (336 lbs/in) Adjustable

Height: Yes lowering 1" to 3" Shock type: Twin tube Spring Preload: 7-10 mm
Colour: gold body with black spring Package included Complete coilovers assembly 2 front & 2 rear A pair wrench for height adjustment Dimension Package dimension: 71*51*21 Weight: 24400g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add...



...

Introduction MXR-B2 series (also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible for BMW 5 series E60 2004-2010 Sedan RWDmodel: 525i, 528i, 530i, 535i, 545i, 550iwill not M models Specification Top mounts: front
- pillow ball top mountsrear
- rubber top mounts Damping: not available Spring rate: front 10kg/mm rear 7 kg/mm Adjustable

Height: Yes lowering 1" to 3" Shock type: Twin tube Spring Preload: 7-10 mm
Colour: red Package includedcomplete coilovers for 2 front & 2 reara pair wrench for height adjustment Dimensionweight: 25420g
Size: 71*51*21 cm Feature 1. Lowered height adjustment from 1''-3'' which allow lower center of gravity & also add a more aggressive stance 2. Twin-Tube structure allows sufficient stroke within the shock absorber 3. Separate height adjustment does not affect damper stroke 4. High Tensile performance spring – STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus, the special surface treatment improves the durability & performance.5. Height Adjustment tools included 6. Pillow ball top mount
- It improves the steering feel & response 7. Most pieces in our Coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components.8. Full rebuildable Note Note: The front damper knuckle insert diameter is 49mm or with bushing 55mm. Warranty: one year warranty for any manufacturing defect






...

Introduction MXR-SNA coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application Compatible for FORD Mustang Base SN95 Convertible/ Coupe 1994-2004 Compatible for FORD Mustang GT SN95 Convertible/ Coupe 1994-2004 Compatible for FORD Mustang SVT SN95 Cobra Convertible/ Coupe 1994-2004 Specification Top mount: Front camber plate Spring rate Front: 8 kg/mm (448 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Spring length Front: 230mm Spring length Rear: 180mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 485mm-575mm Coilover overall length Rear: 550mm-600mm Shock type: Twin tube Spring Preload: 7-10 mm
Colour: blue body with black spring Package includedfront complete coilover assembly rear springs & spring adjusters & shocks A pair wrench for height adjustment Dimension Package dimension: 71*51*21 Weight: 25540g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2. Camber plate top mounts help to eliminate the need for a separate camber kit. 3. Twin-Tube structure allows sufficient stroke within the shock absorber. 4. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. 5. Separate height adjustment does not affect damper stroke & height can be adjusted with coilovers installed on the vehicle. 6. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 7. Most pieces in our coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 8. Steel shock bodies with special surface treatment to improve the durability. 9. full rebuildable




...

Introduction MXR-B2 series (also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application Compatible for FORD Mustang Base SN95 Convertible/ Coupe 1994-2004 Compatible for FORD Mustang GT SN95 Convertible/ Coupe 1994-2004 Compatible for FORD Mustang SVT SN95 Cobra Convertible/ Coupe 1994-2004 Specification Top mount: Front camber plate Spring rate Front: 8 kg/mm (448 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Spring length Front: 230mm Spring length Rear: 180mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 485mm-575mm Coilover overall length Rear: 550mm-600mm Shock type: Twin tube Spring Preload: 7-10 mm
Colour: blue body with black spring Package includedfront complete coilover assembly rear springs & spring adjusters & shocks A pair wrench for height adjustment Dimension Package dimension: 71*51*21 Weight: 25540g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2. Camber plate top mounts help to eliminate the need for a separate camber kit. 3. Twin-Tube structure allows sufficient stroke within the shock absorber. 4. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. 5. Separate height adjustment does not affect damper stroke & height can be adjusted with coilovers installed on the vehicle. 6. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 7. Most pieces in our coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 8. Steel shock bodies with special surface treatment to improve the durability. 9. full rebuildable Warranty: one year warranty for any manufacturing defect




...

Introduction Ma Xpeeding Rods-B2 series (also called Ma Xpeeding Rods-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application Compatible for FORD Mustang Base SN95 Convertible/ Coupe 1994-2004 Compatible for FORD Mustang GT SN95 Convertible/ Coupe 1994-2004 Compatible for FORD Mustang SVT SN95 Cobra Convertible/ Coupe 1994-2004 Specification Top mount: Front camber plate Spring rate Front: 8 kg/mm (448 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Spring length Front: 230mm Spring length Rear: 180mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 485mm-575mm Coilover overall length Rear: 550mm-600mm Shock type: Twin tube Spring Preload: 7-10 mm
Colour: blue body with black spring Package includedfront complete coilover assembly rear springs & spring adjusters & shocks...


...

Introduction Ma Xpeeding Rods-B2 series (also called Ma Xpeeding Rods-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application Compatible for FORD Mustang Base SN95 Convertible/ Coupe 1994-2004 Compatible for FORD Mustang GT SN95 Convertible/ Coupe 1994-2004 Compatible for FORD Mustang SVT SN95 Cobra Convertible/ Coupe 1994-2004 Specification Top mount: Front camber plate Spring rate Front: 8 kg/mm (448 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Spring length Front: 230mm Spring length Rear: 180mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 485mm-575mm Coilover overall length Rear: 550mm-600mm Shock type: Twin tube Spring Preload: 7-10 mm
Colour: blue body with black spring Package includedfront complete coilover assembly rear springs & spring adjusters & shocks...


...

Application 06-14 compatible for Audi A3 8P (Compatible for FWD)06-14 compatible for Audi TT 8J (Compatible for FWD)06-09 compatible for VW MK5 Rabbit 06-10 compatible for VW MK5 Jetta 06-09 compatible for VW MK5 GTI06-10 compatible for VW B6 Passat 07-14 compatible for VW EOS08 compatible for VW R3209-14 compatible for VW CC09-14 compatible for VW Tiguan 10-14 compatible for VW MK6 compatible for Golf 10-14 compatible for VW MK6 GTI10-15 compatible for VW MK6 Jetta Sportwagen 11-15 compatible for VW MK6 Jetta Sedan (excludes Jetta S models)12-14 compatible for VW Beetle Specifications Quantity: -2 front+2 rear shocks-C- Spanner for adjustment-Dust covers. Spring rate Front: 7 kg/mm (392 lbs/in) Spring rate Rear: 5 kg/mm (280 lbs/in) Adjustable

Height: Yes
Colour: Golden Warranty: one year warranty for any manufacturing defect Features- Adjustable ride height.- Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down.- Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.- All inserts come with fitted rubber boots to protect the damper & keep clean.- Improve your handling performance without sacrifice comfortable ride.- A fast & affordable way to easily upgrade your car's appearance.- Easy installation with right tools.- Ideal for any track, drift & fast road & can also be used for daily driving. Notice- No Top Mount Included， Modification Required If You Use OE Top Mount- No instruction included; Professional installation is highly recommended.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.



...