Introduction* enhanced suspension geometry to reduce bump steer * Improves Front  Suspension, Handling, Predictable Response, & even Prevents Premature Tire Wearing. * Design for Street, Track, or Drift Racing Precise Adjustments with Long Service Life * Perfect for track cars, drift control, street course, off-road Application Compatible for Jeep Wrangler TJ 1997-2006 compatible for Jeep Cherokee XJ 1984-2001 compatible for Jeep Grand Cherokee ZJ 1993-1998 Specification Eyelet adjustable length range: 15"
- 18.5" compatiable with 0-4“ suspension lift weight: 8100g package included: 2x（frontlower) control arms Surface finish: Powder-Coated Package Dimensions：68*20*12cm Feature 1. Built from Heavy Duty Tubular Steel to withstand any road or off-road conditions. 2. Polyurethane Bushings, zerk fittings for easy lubrication. 3. Wider range fitment with accessories. 4. Adjustable length for 0-4" lift
...

Introduction* enhanced suspension geometry to reduce bump steer* Improves Front Suspension, Handling, Predictable Response, & even Prevents Premature Tire Wearing.* Design for Street, Track, or Drift Racing Precise Adjustments with Long Service Life* Perfect for track cars, drift control, street course, off-road Application Compatible for Jeep Wrangler TJ 1997-2006 Compatible for Jeep Cherokee XJ 1986-2001 Compatible for Jeep Grand Cherokee ZJ 1993-1998 Specifications compatiable with 0-4" suspension lift Eyelet adjustable length range: 385-470mm
Colour: Gray Warranty:one year for any manufacturing defect Advantages Variable length suspension arm is easily adjusted for proper positioning of axle housing & pinion angle. These upgrades drastically extend the longevity of the joints themselves since they are completely rebuildable for easy maintenance & adjustments. They have fine thread adjustments & are good for lifts up to 4 inches. adjusting the length is as simple as removing one end & rotating the body or shaft to the desired length. Feature * Built from Heavy Duty Tubular Alloy Steel to withstand any road or off-road conditions. * Come complete with poly bushings & an installation guide. * Wider range fitment with accessories. * Adjustable length for 0-4" lift * Professional Installer is Highly Recommended (No Instruction Included) Package
Includes: 2x Front Lower Adjustable Control Arms 4* sleeves for more vehile model This Front Lower Adjustable Control Arm set can be added to any lift kit ranging from stock height to a full 4 inches of lift Note * Instruction is not included. Professional installation is highly recommended.

...

Introduction If you experience steering wander, death wobble, or alignment issues in your compatible for Dodge Ram. This might help you to cure those problems. If your truck is leveled or lifted, you need to upgrade the track bar. It's Advantages: -Lifted compatible for Jeep Wrangler are recommended to have adjustable track bars -Increased off-road capability -Elimination of the death wobble -Center your axle -Reduce rollover risk Application Compatible for Jeep Cherokee XJ Track Bar 1984-2001 Compatible for Jeep Wrangler TJ Track Bar 1997-2006 Note: Not for right hand drive. Specification Condition: New
Material: Carbon Steel
Colour: Blue Surface Finish: Spraying Plastics Placement on Vehicle: Front Length Adjustable Range：MAX:31.73inch/MIN:30.28inch Item Weight：4.56kg Package Dimension: 105*13*9cm Packag included:1X Front Adjustable Track Bar Feature* Precision CNC machined for perfect fitment * Allows for Installation of Plus Sized Tires * Upgraded Tubular Steel Design With Blue Powder Coating Paint For Long Rust Free Life * Massive 1.25" outside diameter. * Thick 0.25" wall tubing for heavy-duty durability. * Adjustable for proper fit. Note- Please double confirm before placing order. - No instruction included; Professional installation is highly recommended. Warranty: one year warranty for any manufacturing defect

...

Introduction If you experience steering wander, death wobble, or alignment issues in your compatible for Dodge Ram. This might help you to cure those problems. If your truck is leveled or lifted, you need to upgrade the track bar. Application Compatible for Jeep Cherokee XJ Track Bar 1984-2001 compatible for Jeep Wrangler TJ Track Bar 1997-2006 Note: Not for right hand drive. Specification Condition: 100% Brand New
Material: High Tensile Strength Carbon Steel Bushing: Premium Polyurethane Bushings Ball joint: Ball joints come with 90-degree zerk fittings
Colour: Blue Surface Finish: Durable Powder Coating Treatment：provides superior corrosion resistance. Placement on Vehicle: Front Length Adjustable Range：MAX:31.73inch/MIN:30.28inch Outer diameter :1.25" Thick Wall：0.25" Item Weight：4.56kg Package Dimension: 105*13*9cm Package included:1X Front Adjustable Track Bar Feature 1. Adjustable straps allow you to precisely center your shafts under your compatible. This improves drivability, comfo...

...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket height adjustable coilovers suspension kit for Inifinit series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Inifinit M35x 06-10 AWDCompatible for Inifinit M45x 06-10 AWDCompatible for Inifinit G35x 03-08 AWDCompatible for Inifnit G37x 08-13 AWDNote: Will not fit RWD model Note： Rear shock absorption is not split Specification Top mounts: standard rubber top mount front & rear Quantity: 2 piece front + 2 pieces rear Spring rate Front: 12kg/mm (672 lbs/in) Spring rate Rear: 10kg/mm (560 lbs/in) Shock type: Twin tube Adjustable Damper: Non-adjustable Adjustable

Height: Yes Adjustable camber plate: No
Colour: Golden Warranty: one year warranty for any manufacturing defect Feature- Adjustable ride height- Adjustable pre-load spring tension- Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response- Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down.- Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.- All inserts come with fitted rubber boots to protect the damper & keep clean.- Improve your handling performance without sacrifice comfortable ride.- A fast & affordable way to easily upgrade your car's appearance.- Easy installation with right tools.- Ideal for any track, drift & fast road & can also be used for daily driving. Note- No instruction included; Professional installation is highly recommended.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.




...

Introduction Ma Xpeeding Rods-B2 series (also called Ma Xpeeding Rods-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible for TOYOTA ALTEZZA AS200 1998.10-2005.07JPN GXE10 compatible for TOYOTA ALTEZZA RS200 1998.10-2005.07JPNSXE10 compatible for LEXUS IS300 2000-2005 USA JCE10L （INCL SPORTS CROSS (5DR) ） Compatible for LEXUS IS 200 1999.4
- 2005.7 GXE10（INCL SPORTS CROSS (5DR) ） Compatible for TOYOTA MARK II 2000.10-2004.11 JPN JZX110 GRANDE IR-V, GRANDE G-TB compatible for TOYOTA MARK II BLIT 2002.01-2007.05JPN JZX110W 2.5IR-V, 2.5IR-SSpecification Top mounts: rubber top mounts Damping: not available Spring rate: front 12kg/mm Spring rate: rear 10kg/mm Adjustable

Height: Yes lowering 1'' to 3'' Shock type: Twin tube Spring Preload: 7-10 mm
Colour: gold Package included...



...

Introduction MXR-SNA coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible for TOYOTA ALTEZZA AS200 1998.10-2005.07JPN GXE10 compatible for TOYOTA ALTEZZA RS200 1998.10-2005.07JPNSXE10 compatible for LEXUS IS300 2000-2005 USA JCE10L （INCL SPORTS CROSS (5DR) ） Compatible for LEXUS IS 200 1999.4
- 2005.7 GXE10（INCL SPORTS CROSS (5DR) ） Compatible for TOYOTA MARK II 2000.10-2004.11 JPN JZX110 GRANDE IR-V, GRANDE G-TB compatible for TOYOTA MARK II BLIT 2002.01-2007.05JPN JZX110W 2.5IR-V, 2.5IR-SSpecification Top mounts: rubber top mounts Damping: not available Spring rate: front 12kg/mm Spring rate: rear 10kg/mm Adjustable

Height: Yes lowering 1'' to 3'' Shock type: Twin tube Spring Preload: 7-10 mm
Colour: gold Package includedcomplete coilovers 2 front & 2 rear a pair wren...



...

Introduction MXR-SNA coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application Compatible for ACURA TL IIUA5 1999-2003 USA including type s compatible for ACURA CL II YA42001-2003 USA compatible for HONDA ACCORD VI 4-door sedan CG1 CG5 CG6 1998-2002 USA compatible for HONDA ACCORD VI 2-door coupe CG2 CG31998-2002 USASpecification Front & Rear top mount: rubber spring rate: front 10kg/mm (560 lbs/in) rear 6 kg/mm (336 lbs/in) Adjustable

Height: Yes lowering 1" to 3" Shock type: Twin tube Spring Preload: 7-10 mm
Colour: gold body with black spring Package included Complete coilovers assembly 2 front & 2 rear A pair wrench for height adjustment Dimension Package dimension: 71*51*21 Weight: 24400g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add...



...

Introduction MXR-B2 series (also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible for BMW 5 series E60 2004-2010 Sedan RWDmodel: 525i, 528i, 530i, 535i, 545i, 550iwill not M models Specification Top mounts: front
- pillow ball top mountsrear
- rubber top mounts Damping: not available Spring rate: front 10kg/mm rear 7 kg/mm Adjustable

Height: Yes lowering 1" to 3" Shock type: Twin tube Spring Preload: 7-10 mm
Colour: red Package includedcomplete coilovers for 2 front & 2 reara pair wrench for height adjustment Dimensionweight: 25420g
Size: 71*51*21 cm Feature 1. Lowered height adjustment from 1''-3'' which allow lower center of gravity & also add a more aggressive stance 2. Twin-Tube structure allows sufficient stroke within the shock absorber 3. Separate height adjustment does not affect damper stroke 4. High Tensile performance spring – STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus, the special surface treatment improves the durability & performance.5. Height Adjustment tools included 6. Pillow ball top mount
- It improves the steering feel & response 7. Most pieces in our Coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components.8. Full rebuildable Note Note: The front damper knuckle insert diameter is 49mm or with bushing 55mm. Warranty: one year warranty for any manufacturing defect






...

Introduction MXR-B2 coil-overs are designed as entry-level for street use. It features height adjustable & adjustable camber plates (applicable for some vehicles), which offer you a lowered stance, & enhanced performance for your daily use vehicle. Application Compatible For BMW 5 series E60 2004-2010 Sedan RWD Model: 520i, 525i, 528i, 530i, 535i, 545i, 550i, 520d, 525d, 530d, 535d Note: will not fit M models. Note:1. Will not fit M models.2. The front damper knuckle insert diameter is 62mm. Please verify the model &

Dimensions before purchasing to ensure compatibility. Specification Damping adjustable: Not available Camber adjustable: Not available Front top mount: Pillow ball Rear top mount: Standard rubber Height adjustable: Yes, lowering 25-75mm depending on the vehicle models Spring Rate Front: 10 kg/mm (560 lbs/in) Spring Rate Rear: 7 kg/mm (392 lbs/in) Front spring inner diameter: 70.5 mm Rear spring inner diameter: 70.5 mm Spring length Front: 230 mm Spring length Rear: 200 mm Spring Preload a...

...