Application Compatible for Infiniti M35x 06-10 AWDcompatible for Infiniti M45x 06-10 AWDcompatible for Infiniti G35x 03-08 AWDcompatible for Infiniti G37x 08-13 AWDNote: Will not fit RWD model； Rear true coilover Note： Rear shock absorption is not split Specification Top mounts: standard rubber top mount front & rear Damping: 24 levels rebound damping adjustable Spring rate Front: 12 kg/mm (672 lbs/in) Spring rate Rear: 10 kg/mm (560 lbs/in) Spring length Front: 160mm Spring length Rear: 200mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 340mm-410mm Coilover overall length Rear: 500mm-590mm Shock type: Twin tube
Colour: gold Package includedcomplete coilovers 2 front & 2 rear a pair wrench for height adjustment Dimensionweight: 21620g
Size: 63*51*21 cm Feature 1. Twin-Tube structure allows sufficient stroke within the shock absorber. 2. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus, the special...




...

Application Compatible for Infiniti M35x 06-10 AWDcompatible for Infiniti M45x 06-10 AWDcompatible for Infiniti G35x 03-08 AWDcompatible for Infiniti G37x 08-13 AWDNote: Will not fit RWD model； Rear true coilover Note： Rear shock absorption is not split Specification Top mounts: standard rubber top mount front & rear Damping: 24 levels rebound damping adjustable Spring rate Front: 12 kg/mm (672 lbs/in) Spring rate Rear: 10 kg/mm (560 lbs/in) Spring length Front: 160mm Spring length Rear: 200mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 340mm-410mm Coilover overall length Rear: 500mm-590mm Shock type: Twin tube
Colour: gold Package includedcomplete coilovers 2 front & 2 rear a pair wrench for height adjustment Dimensionweight: 21620g
Size: 63*51*21 cm Feature 1. Twin-Tube structure allows sufficient stroke within the shock absorber. 2. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus, the special...




...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket adjustable coilovers suspension kit compatible for Honda CR-V series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Honda CR-V 1996-2001 1st Gen. RD1-RD3 compatible for FWD AWDNotice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Product included: Complete coilovers 2 front & 2 rear +a pair wrench for height adjustment Top mounts: Standard rubber top mount front & rear Adjustable damper: 24 ways adjustable damper force Adjustable

Height: Yes, lowering 1'' to 3'' Spring rate front: 10kg/mm (560 lbs/in) Spring rate rear: 7 kg/mm (392 lbs/in) Spring preload: 7-10 mm Shock type: Twin tube
Colour: Red Warranty: one year warranty for any manufacturing defect Features- Rubber top mounts front & rear help to deliver a smooth & forgiving ride for city use at any speed, & rubber joints assist in absorbing hard impacts.- Able to lower ride height by 1''-3''; allows user to have a more aggressive stance.- Coilovers are 24-way adjustable. Rebound & Dampening adjustment which allows the user the ability to dial in your coilovers to any driving needs. The user can enjoy a comfortable riding experience in all road conditions.- Twin-Tube Shock design is used for low internal frictional resistance in order to increase efficiency & keep shock temps low.- Height adjustment does not sacrifice damper stroke length.- These coilovers are able to have their height adjusted without being taken out of the car.- Most components of the suspension parts are made from 6061-T6 aluminum to increase strength & rigidity.- High Tensile strength performance spring---Tested under a 600, 000 time continuous compression test, the spring distortion was less than 0.04%. Plus, the special surface treatment improves the durability & performance.- Adjustment tools included in the kit. Notice- No instruction included; Professional installation is highly recommended.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.



...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket adjustable coilovers suspension kit compatible for Honda CR-V series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Honda CR-V 1996-2001 1st Gen. RD1-RD3 compatible for FWD AWDNotice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Product included: Complete coilovers 2 front & 2 rear +a pair wrench for height adjustment Top mounts: Standard rubber top mount front & rear Adjustable damper: 24 ways adjustable damper force Adjustable

Height: Yes, lowering 1'' to 3'' Spring rate front: 1...


...

Introduction Ma Xpeeding Rods-B2 series (also called Ma Xpeeding Rods-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible for Hyundai Veloster (FS) 2012-2018 Specification Top mounts: front pillow ball top mount with camber plate rear no top mounts included Damping: not available Spring rate: front 8kg/mm rear 6kg/mm Adjustable

Height: Yes lowering 1" to 3" Shock type: Twin tube Spring Preload: 7-10 mm
Colour: red Package includedcomplete coilovers 2 front & 2 rear a pair wrench for height adjustment Dimensionweight: 25000g
Size: 60*20*21 Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance 2. Twin-Tube structure allows sufficient stroke within the shock absorber. 3. Separate height adjustment does no...




...

description Upper & Lower Adjustable Control Arm Set compatible for Jeep TJ 1997-2006 Application: (There are 2 choices for you, which fit different vehices) No.1: Rear Upper+ Front Lower: Compatible for Jeep Wrangler TJ 1997-2006 Compatible for Jeep Grand Cherokee ZJ 1993-1998 No.2: Rear Upper+ Rear Lower: Compatible for Jeep Compatible for Wrangler TJ 1997-2006 Note: compatible for vehicles with 0-4 inch lift Package
Includes:: 2 Pcs * Rear Upper Adjustable Control Arms 2 Pcs * Lower Adjustable Control Arms
Colour: Gold
Material: Steel Bushing: Poly Eyelet Adjustable Length Range: Rear Upper:320-420mm Lower:385-470mm Warranty:one year for any manufacturing defect Advantages:* Adjustable control arms are the perfect replacement for standard factory version & really show their use when the vehicle leaves pavement to head off road.* The adjustability from our control arms allow you to dial in your cars suspension for optimal on & off-road performance.* These control arms twist or rotate while...


...

Introduction MXR-SNA coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application Compatible for MAZDA MX-5 I (NA) (09/1989-04/1998) Compatible for Mazda Miata MX-5 NA (1.6L, 1.8L) 1989-1997 Compatible for Mazda Miata Base Convertible 2D 1999-2005 Compatible for Mazda Miata LE Convertible 2D 1993 Compatible for Mazda Miata STO Convertible 2D 1997 Compatible for Mazda Miata 10th Anniversary Convertible 2D 1999 Compatible for Mazda Miata LS Convertible 2D 2000-2005 Specification Damping Levels: No Adjustable

Height: Yes, lowering 1" to 3" Adjustable camber plate: No Top mount (Front & Rear): Pillow ball Spring rate Front: 7 kg/mm (392 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in) Twin Tube Internal Construction
Colour: Golden Package included 2 pieces front+2 pieces rear as shown Dimension
Size: 63*51*21 cm Weight: 21.4kg Feature Twin-Tube structure allows sufficient stroke within the shock absorber. Pillow ball top mount
- It improves the steering feel & response. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. Separate height adjustment does not affect damper stroke. Height can be adjusted with coilovers installed on the vehicle. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. Height Adjustment tools included. Full rebuildable.





...

Application Compatible for Dodge Ram 1500 1994-2008 4x 4; Compatible for Dodge Ram 2500 1994-2009 4x 4; Compatible for Dodge Ram 3500 1994-2009 4x 4; compatiable for vehicle with 0-6 inch lift Specification
Material: steel bushing: poly powder-coated finish eye to eye length range: upper: 420-462.5mm with an insert diameter of 14mm lower: 470-512.5mm with an insert diameter of 16mm package included: 2 * front upper control arms 2* front lower control arms 16 washers to compatible with more models package dimension: 72.5*20.6*20.8cm weight:16000g Featurethe tubular design is stronger & more durable than factory-stamped steel. powder-coated finish for anti-rust. pre-pressed in poly bushings last longer & improve handling. adjustable length design supports vehicles with 0
- 6 inch lift.

...

Introduction: Adjustable torsion key leveling lift kit engineered to give the SUV or trucks a level stance while maintaining the factory ride. Even more important is that we offer a forged torsion key that is both 40% stronger than OEM cast key & designed using the same features as OEM key. Level lift your vehicle, add the amount of lift for the front to the difference between front & rear stock heights & use this for your rear lift. Application: Compatible for Chevy Avalanche 6-Lug 2WD 4WD 2002-2006 Compatible for Chevy Suburban 1500 6-Lug 2WD 4WD 2000-2006 Compatible for Chevy Tahoe 6-Lug 2WD 4WD 2000-2006 Compatible for GMC Yukon 6-Lug 2WD 4WD 2002-2006 Compatible for GMC Yukon XL 6-Lug 2WD 4WD 2002-2006 Compatible for Cadillac Escalade 2WD 4WD 2002-2006 Specification: Lift

Height: 1-3" Front 2 Rear Tire Recommendation: 33X11.50 Included Hardware: Mounting Hardware Placement on Vehicle: Left, Right, Front Installation time: 1-2 hour...

...

Application Compatible for Chevy Silverado 1500 4WD 1999-2006 Compatible for Chevy Silverado 1500 Classic 4WD 2007 Compatible for GMC Sierra 1500 4WD 1999-2006 Compatible for GMC Sierra 1500 Classic 4WD 2007 Note: Will fit 2007 " Classic" models. Does NOT fit for HD models. Does NOT fit for GMT400 " Classic" body style 1999. 4WD Only. May work on some 2wd, but they must have torsion bar suspension. Specification Condition: 100% Brand New
Material: High quality steel Placement on Vehicle: Left, Right, Front, Rear Part Type: Suspension Lift Kit Item Weight: 20.00kg Package Dimension: 72*20*20cm Install time: 2.5 hours Tire

Size: Accommodates 265/75R16 / 32x 10.50R16 Tires on Stock 16 Wheels Feature 100% Simple bolt-on installation Increased ground clearance Forged torsion bar adjuster keys Ability to install larger tires Levels the front of the vehicle with the rear Ability to drive through tougher terrain A better view can lead to safer driving Packag...


...