Introduction Ma Xpeeding Rods-B2 series (also called Ma Xpeeding Rods-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible For Hyundai Veloster (FS) 2012-2018 Specification Top mounts: front pillow ball top mount with camber plate rear no top mounts included Damping: not available Spring rate: front 8kg/mm rear 6kg/mm Adjustable

Height: Yes lowering 1" to 3" Shock type: Twin tube Spring Preload: 7-10 mm
Colour: blue Package includedcomplete coilovers 2 front & 2 rear a pair wrench for height adjustment Dimensionweight: 25280g
Size: 63*51*21 cm Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance 2. Twin-Tube structure allows sufficient stroke within the shock absorber. 3. Separate height adjustment doe...




...

Introduction MXR-SLC based on MXR-SNA coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for Toyota Celica GT GTS compatible for FWD 1989.10- 1993.11 (ST18) Compatible for Toyota Celica compatible for FWD 11.1993.11-1999.08 (ST20) Specification Front top mounts: pillow ball with camber adjustable Rear top mounts: pillow ball Damping: 24 ways damping adjustable Spring rate Front: 10kg/mm (556 lbs/in) Spring rate Rear: 6kg/mm (336 lbs/in) Adjustable

Height: Yes lowering 1" to 3" Shock type: Twin tube Spring preload: 7-10 mm
Colour: golden Package includedcomplete coilovers for 2 front & 2 rear a pair wrench for height adjustment Dimensionweight: 29740
Size: 63*51*21 cm Feature 1. Damping adjustable ---24 ways d...



...

Introductionma Xpeedingrods SP1 lowering coilover, standard with adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plate（for some vehicles) & decent outlook, offers you more ability to tune your suspension on performance & gives your vehicle more impressive appearance. Besides, all our coilover are assembled in dust-free factory, which turns out good quality & long life. Application Compatible for HONDA CIVIC 1992-1995 EG1 EG2 EG3 EG4 EG5 EG6 EG8 EG9 EJ1 EJ2 EH2 EH3 EH9 Rear FORK TYPE BRACKET MODEL ONLYCompatible for HONDA CIVIC 1995-2000 EK2 EK3 EK4 EJ6 EJ7 EJ8 EM1 Rear FORK TYPE BRACKET MODEL ONLYCompatible for HONDA DELSOL 1993-1997 EG1 Rear FORK TYPE BRACKET MODEL ONLY Specifications Front top mount: pillow ball Rear top mount: rubber Damping: 24 levels rebound damping adjustable Spring rate: Front: 8kg/mm (448 lbs/in) Rear: 5kg/mm (280 lbs/in)​ Adjustable

Height: Yes lowering 1" to 3" Shock type: Twin tube Spring Preload: 7-10 mm
Colour: black body with blue spring Package included: Complete coilovers assembly 2 front & 2 rear A pair wrench for height adjustment Dimension Package dimension: 71*51*21 Weight: 22260g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance.2. A 24 rebound damping adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions.3. Front pillow ball top mounts improve the steering feel & response.4. Full length dust boot keeps shaft & oil seal from damage.5. Upgraded damper adjust knob makes damping setting easier.6. Upgraded valving for more smooth ride.7. Twin-Tube structure allows sufficient stroke within the shock absorber.8. High-Performance Damping Oil--maintains a stable viscosity in a broad temperature range, which sustains smooth stroke & reliable damping force in a variety of circumstances.9. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%.10. Decent appearance benefits from CNC machined parts & special surface treatment.11. Most pieces in our coilover systems, including mounts, collars & spring perches, are made from 6061-T6 Billet Aluminum resulting in light weight, durable & rust resistant components.12. Complete Suspension Kit of 4 Shock Absorbers 4 Springs for an easy installation.13. Separate height adjustment does not affect damper stroke & height can be adjusted with coilovers installed on the vehicle.14. All coilovers were produced & assembled at dust-free factory which guaranteed the highest quality. Note For some vehicles, you will need sleeves & washers that already included in our package.




...

Application Compatible for Infiniti M35x 06-10 AWDcompatible for Infiniti M45x 06-10 AWDcompatible for Infiniti G35x 03-08 AWDcompatible for Infiniti G37x 08-13 AWDNote: Will not fit RWD model； Rear true coilover Note： Rear shock absorption is not split Specification Top mounts: standard rubber top mount front & rear Damping: 24 levels rebound damping adjustable Spring rate Front: 12 kg/mm (672 lbs/in) Spring rate Rear: 10 kg/mm (560 lbs/in) Spring length Front: 160mm Spring length Rear: 200mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 340mm-410mm Coilover overall length Rear: 500mm-590mm Shock type: Twin tube
Colour: gold Package includedcomplete coilovers 2 front & 2 rear a pair wrench for height adjustment Dimensionweight: 21620g
Size: 63*51*21 cm Feature 1. Twin-Tube structure allows sufficient stroke within the shock absorber. 2. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus, the special...




...

Application Compatible for Infiniti M35x 06-10 AWDcompatible for Infiniti M45x 06-10 AWDcompatible for Infiniti G35x 03-08 AWDcompatible for Infiniti G37x 08-13 AWDNote: Will not fit RWD model； Rear true coilover Note： Rear shock absorption is not split Specification Top mounts: standard rubber top mount front & rear Damping: 24 levels rebound damping adjustable Spring rate Front: 12 kg/mm (672 lbs/in) Spring rate Rear: 10 kg/mm (560 lbs/in) Spring length Front: 160mm Spring length Rear: 200mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 340mm-410mm Coilover overall length Rear: 500mm-590mm Shock type: Twin tube
Colour: gold Package includedcomplete coilovers 2 front & 2 rear a pair wrench for height adjustment Dimensionweight: 21620g
Size: 63*51*21 cm Feature 1. Twin-Tube structure allows sufficient stroke within the shock absorber. 2. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus, the special...




...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket adjustable coilovers suspension kit compatible for Honda CR-V series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Honda CR-V 1996-2001 1st Gen. RD1-RD3 compatible for FWD AWDNotice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Product included: Complete coilovers 2 front & 2 rear +a pair wrench for height adjustment Top mounts: Standard rubber top mount front & rear Adjustable damper: 24 ways adjustable damper force Adjustable

Height: Yes, lowering 1'' to 3'' Spring rate front: 1...


...

Introduction Ma Xpeeding Rods-B2 series (also called Ma Xpeeding Rods-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible for Hyundai Veloster (FS) 2012-2018 Specification Top mounts: front pillow ball top mount with camber plate rear no top mounts included Damping: not available Spring rate: front 8kg/mm rear 6kg/mm Adjustable

Height: Yes lowering 1" to 3" Shock type: Twin tube Spring Preload: 7-10 mm
Colour: red Package includedcomplete coilovers 2 front & 2 rear a pair wrench for height adjustment Dimensionweight: 25000g
Size: 60*20*21 Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance 2. Twin-Tube structure allows sufficient stroke within the shock absorber. 3. Separate height adjustment does no...




...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket height adjustable coilovers suspension kit compatible for Mitsubishi series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Mitsubishi Galant/ Legnum VR4 EC5A/ EC5W 1999-2003 Fits Models with 2.5L 6A13TT V6 Engines ONLYSpecification Quantity: 2 pieces front + 2 pieces rear as shown in the picture Front Spring Rate: 6 kg/mm (336 in/lbs) Rear Spring Rate: 7 kg/mm (392 in/lbs) Damper: Non adjustable damper force Adjustable

Height: YES Adjustable Camber Plate: No
Colour: golden Warranty: one year warranty for any manufacturing defect Feature-...



...

description Upper & Lower Adjustable Control Arm Set compatible for Jeep TJ 1997-2006 Application: (There are 2 choices for you, which fit different vehices) No.1: Rear Upper+ Front Lower: Compatible for Jeep Wrangler TJ 1997-2006 Compatible for Jeep Grand Cherokee ZJ 1993-1998 No.2: Rear Upper+ Rear Lower: Compatible for Jeep Compatible for Wrangler TJ 1997-2006 Note: compatible for vehicles with 0-4 inch lift Package
Includes:: 2 Pcs * Rear Upper Adjustable Control Arms 2 Pcs * Lower Adjustable Control Arms
Colour: Gold
Material: Steel Bushing: Poly Eyelet Adjustable Length Range: Rear Upper:320-420mm Lower:385-470mm Warranty:one year for any manufacturing defect Advantages:* Adjustable control arms are the perfect replacement for standard factory version & really show their use when the vehicle leaves pavement to head off road.* The adjustability from our control arms allow you to dial in your cars suspension for optimal on & off-road performance.* These control arms twist or rotate while...


...

Introduction MXR-SNA coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application Compatible for MAZDA MX-5 I (NA) (09/1989-04/1998) Compatible for Mazda Miata MX-5 NA (1.6L, 1.8L) 1989-1997 Compatible for Mazda Miata Base Convertible 2D 1999-2005 Compatible for Mazda Miata LE Convertible 2D 1993 Compatible for Mazda Miata STO Convertible 2D 1997 Compatible for Mazda Miata 10th Anniversary Convertible 2D 1999 Compatible for Mazda Miata LS Convertible 2D 2000-2005 Specification Damping Levels: No Adjustable

Height: Yes, lowering 1" to 3" Adjustable camber plate: No Top mount (Front & Rear): Pillow ball Spring rate Front: 7 kg/mm (392 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in) Twin Tube Internal Construction
Colour: Golden Package included 2 pieces front+2 pieces rear as shown Dimension
Size: 63*51*21 cm Weight: 21.4kg Feature Twin-Tube structure allows sufficient stroke within the shock absorber. Pillow ball top mount
- It improves the steering feel & response. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. Separate height adjustment does not affect damper stroke. Height can be adjusted with coilovers installed on the vehicle. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. Height Adjustment tools included. Full rebuildable.





...