Application Compatible For Ford Mustang 4th Gen. 1994-2004 Specification Top mount Front camber plate Damping 24 levels rebound damping adjustable Spring rate Front 8 kg/mm (448 lbs/in) Spring rate Rear 7 kg/mm (392 lbs/in) Adjustable height lowering 1-3 inch Shock Type Twin tube Spring Preload 7-10 mm Colour black body with blue spring Feature 1. Lowered height adjustment from 1"
- 3" which allow a lower centre of gravity & also add a more aggressive stance.2. A 24 rebound damping adjustment level allows you the ability to perfectly dial in your Coilover setup. You will experience better ride quality in all road conditions.3. Pillow ball top mounts improve the steering feel & response.4. Full-length dust boot keeps shaft & oil seal from damage.5. Upgraded damper adjust knob makes damping setting easier.6. Upgraded valving for a more smooth ride.7. Twin-Tube structure allows sufficient stroke within the shock absorber.8. High-Performance Damping Oil--maintains a stable viscosity in a broad temperature range, which sustains smooth stroke & reliable damping force in a variety of circumstances.9. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%.10. Decent appearance benefits from CNC machined parts & special surface treatment.11. Most pieces in our Coilover systems, including mounts, collars & spring perches, are made from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust-resistant components.12. Complete Suspension Kit of 4 Shock Absorbers 4 Springs for an easy installation.13. Separate height adjustment does not affect damper stroke & height can be adjusted with coilovers installed on the vehicle.14. All coilovers were produced & assembled at the dust-free factory which guaranteed the highest quality.15. Camber plate top mounts help to eliminate the need for a separate camber kit. Package includedfront complete Coilover assemblyrear springs & spring adjusters & shocks A pair wrench for height adjustment Dimension Package dimension: 71*51*21 Weight: 25000g Warranty: one year warranty for any manufacturing defect

...

Introductionma Xpeedingrods T6 lowering coil-over, standard with adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plate（for some vehicles), & decent outlook, offers you more ability to tune your suspension on performance & gives your vehicle more impressive appearance. Besides, all our coil-overs are assembled in a dust-free factory, which turns out good quality & long life. Application Compatible For FORD Mustang Base SN95 Convertible/ Coupe 1994-2004 Compatible For FORD Mustang GT SN95 Convertible/ Coupe 1994-2004 Specification Damping adjustable: Available, 24 levels of rebound damping force Shock structure type: twin -tube Top mount structure: Front pillow ball with camber plate Camber adjustable: Available, front only Height adjustable: Yes, lowering 1-3 inches depending on the vehicle models Spring rate Front: 8 kg/mm (448 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Spring length Front... ...

Introduction Compatible for Chrysler 200 3.6L Engines only 2011-2017 compatible for Chrysler 300 3.6L Engines only 2011-2019 compatible for Chrysler Town & Country 3.6L Engines only 2011-2016 compatible for Dodge Grand Carvan 3.6L Engines only 2011-2018 compatible for Dodge Journey 3.6L Engines only 2011-2018 compatible for Dodge Durango 3.6L Engines only 2011-2015 compatible for Dodge Challenger 3.6L Engines only 2011-2020 compatible for Dodge Charger 3.6L Engines only 2011-2020 compatible for Dodge Avenger 3.6L Engines only 2011-2014 compatible for Jeep Cherokee 3.2L Engines 2014-2020 compatible for Jeep Grand Cherokee 3.6L Engines
- 2018 UP 3.0L ONLY! 2011-2019 compatible for Jeep Wrangler 3.6L Engines only 2014-2018 compatible for Ram 1500 3.6L Engines only 2013-2019 compatible for Ram Promaster 1500 3.6L Engines only 2014-2018 compatible for Ram Promaster 2500 3.6L Engines only 2014-2018 compatible for Ram Promaster 3500 3.6L Engines only 2014-2018OE/ Part number 5184332AA, 05184332A...
...

Ma Xpeedingrods T6 lowering coilover, features 24 clicks adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plates & decent outlook to provide perfect balance between comfort & performance. This suspension system is ideal for daily driving & occasional, light track use. High quality components are adopted to ensure product durability & stability. Each application is fully test fitted & completely road tested to guarantee all our customers perfect performance & comfort expectations. Features 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2. Adjustable Camber Plate & Pillow ball top mount for sharpening steering response.（ Front Only) 3. Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts. (only rear) 4.24 levels of ad...
...

Introduction Ma Xpeeding Rods-B3 series (also called Ma Xpeeding Rods-SLC) based on Ma Xpeeding Rods-B2 series (also called Ma Xpeeding Rods-SNA) coilovers, which is also height adjustable but adds damping adjustment ability by a knob on the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible For HONDA PRELUDE BB1-BB9 1992-2001 Note: This coil-over is perfectly suitable with TYPE S, Si R, & S SPEC which has strut tower bar mounting points. It can also be used directly for some USDM Preludes which have reserved factory mounting points. For some models without mounting points, you can remove the 2 additional studs. Specification Top mounts: pillow ball top mounts Damping: 24 levels rebound damping adjustable Spring rate Front: 8 kg/mm (448 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Spring length Front: 180mm S... ...

Maxpeedingrods is a professional coilover manufacturer with 17 years industry experience. We have a professional technical & customer service team who can provide you technical support & after-sales service in time. Features 100%, Never Used Or Installed Twin-cylinder Design
- Allows Sufficient Stroke Within The Shock Absorber. Full Length Adjustment
- Lowers The Car Without Ruining Spring Tension Independent Spring Tension
- Custom Stiffness Without Change Ride Height 24-clicks Of Damping Adjustment (compression/rebound) Simultaneously Front Camber Plates With Pillowball Mount For Camber Adjustment Aluminum Front & Rear Bottom Mounts Fully Anodized Rust Resistant Sleeves. 1 Year Limited Warranty Against Manufacturer Defect Twin-tube Coilovers 1. It is easier to secure sufficient stroke, because the oil & gas chambers are separated & not positioned serially. 2. The use of base valve enables to keep gas pressure low, allowing for a more comfortable ride. 3. Lo...


...

Introductionma Xpeedingrods T6 lowering coil-over, standard with adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plate（for some vehicles), & decent outlook, offers you more ability to tune your suspension on performance & gives your vehicle more impressive appearance. Besides, all our coil-overs are assembled in a dust-free factory, which turns out good quality & long life. Application Compatible for Chevy Camaro All Models 2010-2015, excluding Magne Ride Suspension Specification Top mounts: Front & rear OE top mounts required Damping adjustable: Available, 24 levels of rebound damping force Camber adjustable: Not available Height adjustable: Yes, lowering 25-75mm depending on the vehicle models Spring Rate Front: 8 kg/mm (448 lbs/in) Spring Rate Rear: 13 kg/mm (728 lbs/in) Spring length Front: 200 mm Spring length Rear: 185 mm Spring Preload advised: 7-10 mm
Colour: Black body with...
...

Introduction MXR-B3 is based on MXR-B2 coil-overs, which are also height adjustable. They are also made for street use, but the 24-level rebound damping control allows you the ability to perfectly dial in your coil-over setup. You will experience better ride quality in all road conditions. Application Compatible for Subaru forester SJ 2014–2018 Specification Front top mount: Pillow ball with camber plate Rear top mount: Standard rubber Damping adjustable: Available, 24 levels of rebound damping force Height adjustable: Yes, lowering 25-75mm depending on the vehicle models Camber adjustable: Available Spring rate Front: 8 kg/mm (448 lbs/in) Spring rate Rear: 5 kg/mm (380 lbs/in) Front spring inner diameter: 70.5 mm Rear spring inner diameter: 70.5 mm Spring length Front: 200 mm Spring length Rear: 180 mm Spring Preload advised: 7-10 mm
Colour: Golden body with black spring Package included Package included： 2x Front coil-overs 2x Rear coil-overs 1x Allen wrench 2x C spanners Dimension Package si...
...

Introduction MXR-B3 is based on MXR-B2 coil-overs, which are also height adjustable. They are also made for street use, but the 24-level rebound damping control allows you the ability to perfectly dial in your coil-over setup. You will experience better ride quality in all road conditions. Application Compatible for Scion XB 2004-2006 (US model) Compatible for Toyota Echo 2000-2005 Specification Front top mount: Pillow ball Rear top mount: OE top mount requi Golden Damping adjustable: Available, 24 levels of rebound damping force Camber adjustable: Not available Height adjustable: Yes, lowering 25-75mm depending on the vehicle models Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 5 kg/mm (280 lbs/in) Front spring inner diameter: 70.5 mm Rear spring inner diameter: 62 mm Spring length Front: 200 mm Spring length Rear: 200 mm Spring Preload advised: 7-10 mm
Colour: Golden body with black spring Package included Package included：2x Front coil-overs 2x Rear coil-overs 2x C spanners 1x Allen wrench Dime...
...

Introduction MXR-B3 is based on MXR-B2 coil-overs, which are also height adjustable. They are also made for street use, but the 24-level rebound damping control allows you the ability to perfectly dial in your coil-over setup. You will experience better ride quality in all road conditions. Application Compatible for Toyota Corolla 9th Gen. (E130) 2003-2008 USA compatible for Toyota Corolla 9th Gen (_E12_) (01/2001-12/2007) other markets compatible for Toyota Matrix XRS (E130) 2003-2008 Specification Front top mounts: pillow ball with camber plate Rear top mounts: standard rubber Damping adjustable: Available, 24 levels of rebound damping force Camber adjustable: Available Height adjustable: Yes, lowering 25-75mm depending on the vehicle models Spring rate Front: 12 kg/mm (672 lbs/in) Spring rate Rear: 8 kg/mm (448 lbs/in) Front spring inner diameter: 70.5 mm Rear spring inner diameter: 70.5 mm Spring length Front: 190 mm Spring length Rear: 180mm Spring Preload advised: 7-10 mm
Colour: Red b...
...