Application Compatible for Hyundai Genesis Coupe 2010–2016 (North America Models) 2-Door Only Specification Quantity: 2 piece front + 2 pieces rear + 2 sway bars + 2 spanners Spring rate Front:6 kg/mm (336 lbs/in) Spring rate Rear: 9 kg/mm (504 lbs/in) Adjustable damper: 24 ways Adjustable Damper Adjustable

Height: Yes Adjustable camber plate: No
Colour: Golden Warranty: one year warranty for any manufacturing defect Feature- 24 levels of adjustable damper -- This allows you the ability to perfectly dial in your coilovers system. For a nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. For occasional track days, set it to full stiff.


...

Introduction Maxpeedingrods-B3 is based on Maxpeedingrods-B2 coil-overs, which are also height adjustable. They are also made for street use, but the 24-level rebound damping control allows you the ability to perfectly dial in your coil-over setup. You will experience better ride quality in all road conditions. Application Compatible for Nissan 350Z Coupe RWD 2003-2008 (Z33) Compatible for Nissan 350Z Roadster Convertible RWD 2003-2008 (Z33) Compatible for Nissan Skyline Coupe RWD 2003-2007（V35) Compatible for Infiniti G35 Coupe RWD 2003-2007 (V35) Compatible for Infiniti G35 Sedan RWD 2003-2006 (V35) Note: Not for AWD models. Specification Top mounts: pillow ball top mount front & rear Damping adjustable: Available, 24 levels of rebound damping force Camber adjustable: Not available Height adjustable: Yes, lowering 25-75mm depending on the vehicle models Spring Rate Front: 12 kg/mm (672 lbs/in) Spring Rate Rear: 10 kg/mm (560 lbs/in) Front spring inner diameter: 62 mm Rear spring inner... ...

Introduction Ma Xpeedingrods T7 coil-overs are designed for daily street use & Junior track use. It features racing damping oil, an upgraded racing spring, height adjustable, & an adjustable camber plate (applicable for some vehicles), which offers you a lowered stance & enhanced handling. Application Compatible for MAZDA RX-8 2003.04-2008.02 JPN SE3P BASE MODEL, TYPE E, TYPE S Compatible for MAZDA RX-8 2004-2008USA SE3P Compatible for MAZDA RX-8 2009-2011 USA SE3P Specification - Damping adjustable: Available, 24 levels of rebound damping force - Camber adjustable: Not available - Height adjustable: Yes, lowering 1-3 inches depending on the vehicle models - Spring Rate Front: 10kg/mm (560lbs/in) - Spring Rate Rear: 8kg/mm (448lbs/in) - Front spring inner diameter: 70.5mm - Rear spring inner diameter: 70.5mm - Spring length Front: 180mm - Spring length Rear: 140mm - Spring Preload advised: 7-10 mm -
Colour: Black body with grey spring Features-Racing damping oil & spring...
...

Application Compatible For Ford Mustang 4th Gen. 1994-2004 Specification Top mount Front camber plate Damping 24 levels rebound damping adjustable Spring rate Front 8 kg/mm (448 lbs/in) Spring rate Rear 7 kg/mm (392 lbs/in) Adjustable height lowering 1-3 inch Shock Type Twin tube Spring Preload 7-10 mm Colour black body with blue spring Feature 1. Lowered height adjustment from 1"
- 3" which allow a lower centre of gravity & also add a more aggressive stance.2. A 24 rebound damping adjustment level allows you the ability to perfectly dial in your Coilover setup. You will experience better ride quality in all road conditions.3. Pillow ball top mounts improve the steering feel & response.4. Full-length dust boot keeps shaft & oil seal from damage.5. Upgraded damper adjust knob makes damping setting easier.6. Upgraded valving for a more smooth ride.7. Twin-Tube structure allows sufficient stroke within the shock absorber.8. High-Performance Damping Oil--maintains a stable viscosity in a broad temperature range, which sustains smooth stroke & reliable damping force in a variety of circumstances.9. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%.10. Decent appearance benefits from CNC machined parts & special surface treatment.11. Most pieces in our Coilover systems, including mounts, collars & spring perches, are made from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust-resistant components.12. Complete Suspension Kit of 4 Shock Absorbers 4 Springs for an easy installation.13. Separate height adjustment does not affect damper stroke & height can be adjusted with coilovers installed on the vehicle.14. All coilovers were produced & assembled at the dust-free factory which guaranteed the highest quality.15. Camber plate top mounts help to eliminate the need for a separate camber kit. Package includedfront complete Coilover assemblyrear springs & spring adjusters & shocks A pair wrench for height adjustment Dimension Package dimension: 71*51*21 Weight: 25000g Warranty: one year warranty for any manufacturing defect

...

Introductionma Xpeedingrods T6 lowering coil-over, standard with adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plate（for some vehicles), & decent outlook, offers you more ability to tune your suspension on performance & gives your vehicle more impressive appearance. Besides, all our coil-overs are assembled in a dust-free factory, which turns out good quality & long life. Application Compatible For FORD Mustang Base SN95 Convertible/ Coupe 1994-2004 Compatible For FORD Mustang GT SN95 Convertible/ Coupe 1994-2004 Specification Damping adjustable: Available, 24 levels of rebound damping force Shock structure type: twin -tube Top mount structure: Front pillow ball with camber plate Camber adjustable: Available, front only Height adjustable: Yes, lowering 1-3 inches depending on the vehicle models Spring rate Front: 8 kg/mm (448 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Spring length Front... ...

Ma Xpeedingrods T6 lowering coilover, features 24 clicks adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plates & decent outlook to provide perfect balance between comfort & performance. This suspension system is ideal for daily driving & occasional, light track use. High quality components are adopted to ensure product durability & stability. Each application is fully test fitted & completely road tested to guarantee all our customers perfect performance & comfort expectations. Features 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2. Adjustable Camber Plate & Pillow ball top mount for sharpening steering response.（ Front Only) 3. Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts. (only rear) 4.24 levels of ad...
...

Introduction Ma Xpeeding Rods-B3 series (also called Ma Xpeeding Rods-SLC) based on Ma Xpeeding Rods-B2 series (also called Ma Xpeeding Rods-SNA) coilovers, which is also height adjustable but adds damping adjustment ability by a knob on the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible For HONDA PRELUDE BB1-BB9 1992-2001 Note: This coil-over is perfectly suitable with TYPE S, Si R, & S SPEC which has strut tower bar mounting points. It can also be used directly for some USDM Preludes which have reserved factory mounting points. For some models without mounting points, you can remove the 2 additional studs. Specification Top mounts: pillow ball top mounts Damping: 24 levels rebound damping adjustable Spring rate Front: 8 kg/mm (448 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Spring length Front: 180mm S... ...

Introductionma Xpeedingrods T6 lowering coil-over, standard with adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plate（for some vehicles), & decent outlook, offers you more ability to tune your suspension on performance & gives your vehicle more impressive appearance. Besides, all our coil-overs are assembled in a dust-free factory, which turns out good quality & long life. Application Compatible For Tesla model Y 2020+ RWDSpecification Damping adjustable: Available, 24 levels of rebound damping force Shock structure type: twin -tube Spring Rate Front: 10 kg/mm (560lbs/in) Spring Rate Rear: 10 kg/mm (560lbs/in) Spring length Front: 200 mm Spring length Rear: 220 mm Front spring inner diameter:70.5 mm Rear spring inner diameter:100 mm Lowering height (compare with OE height) front: 0-45mm Lowering height (compare with OE height) rear: 0-45mm
Colour: Black body with blue spring Warranty: one year wa...
...

Maxpeedingrods is a professional coilover manufacturer with 17 years industry experience. We have a professional technical & customer service team who can provide you technical support & after-sales service in time. Features 100%, Never Used Or Installed Twin-cylinder Design
- Allows Sufficient Stroke Within The Shock Absorber. Full Length Adjustment
- Lowers The Car Without Ruining Spring Tension Independent Spring Tension
- Custom Stiffness Without Change Ride Height 24-clicks Of Damping Adjustment (compression/rebound) Simultaneously Front Camber Plates With Pillowball Mount For Camber Adjustment Aluminum Front & Rear Bottom Mounts Fully Anodized Rust Resistant Sleeves. 1 Year Limited Warranty Against Manufacturer Defect Twin-tube Coilovers 1. It is easier to secure sufficient stroke, because the oil & gas chambers are separated & not positioned serially. 2. The use of base valve enables to keep gas pressure low, allowing for a more comfortable ride. 3. Lo...


...

Introductionma Xpeedingrods T6 lowering coil-over, standard with adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plate（for some vehicles), & decent outlook, offers you more ability to tune your suspension on performance & gives your vehicle more impressive appearance. Besides, all our coil-overs are assembled in a dust-free factory, which turns out good quality & long life. Application Compatible for Chevy Camaro All Models 2010-2015, excluding Magne Ride Suspension Specification Top mounts: Front & rear OE top mounts required Damping adjustable: Available, 24 levels of rebound damping force Camber adjustable: Not available Height adjustable: Yes, lowering 25-75mm depending on the vehicle models Spring Rate Front: 8 kg/mm (448 lbs/in) Spring Rate Rear: 13 kg/mm (728 lbs/in) Spring length Front: 200 mm Spring length Rear: 185 mm Spring Preload advised: 7-10 mm
Colour: Black body with...
...