More From Contributor

$62
Application Compatible for Yamaha Kodiak 4004x 42000
- 2006 Specifications Part Number: 5UH-15710-00-00, 5GH-15710-21-00, 5GH-15710-10-00,
...
Available
$166
Application Compatible for Yamaha RAPTOR 660R 2001-2005 Specification Including: Carburetor kit Cylinder Piston Piston Rings Wristpin Circlips (2) Head Gasket Base Gasket O-Ring Spark Plug Just as the picture shown Condition: New Accessories: You will get exactly as shown in the picture above. Note Professional installation is highly recommended (No Instruction Included). For any needs please contact us. Warranty: one year warranty for any manufacturing defect ...
Available
$51
Application NEW CARBURETOR FOR 2001-2005 compatible for YAMAHA RAPTOR 660 660R YFM660 YFM 660R CARB compatible for YAMAHA RAPTOR 660 2001-2005 Specification Including: 1x Carburetor. 1x Throttle Base Cover. 1x Throttle Base Rubber Gasket. 1x Throttle Cable Clip. 3x Base Cover Screw. Condition: New Accessories: You will get exactly as shown in the picture above Note Professional installation is highly recommended (No Instruction Included) For any needs please contact us. Warranty: one year warranty for any manufacturing defect ...
Available
$115
Fit For Compatible for Yamaha Grizzly 660 YFM660FH 4x 4 Hardwoods Hunter Edition compatible for Yamaha Grizzly 660 YFM660FHW 4x 4 Wetlands Hunter Edition compatible for Yamaha Grizzly 660 YFM660F 4x 4 compatible for Yamaha Grizzly 660 YFM660FH 4x 4 Hunter Edition compatible for Yamaha Grizzly 660 YFM660FA 4x 4 compatible for Yamaha Grizzly 660 YFM660FG 4x 4 compatible for Yamaha Grizzly 660 YFM660FGH 4x 4 Hunter Edition compatible for Yamaha Grizzly 660 YFM660FG 4x 4 compatible for Yamaha Grizzly 660 YFM660FGH 4x 4 Hunter Edition compatible for Yamaha Grizzly 660 YFM660FA 4x 4 compatible for Yamaha Grizzly 660 YFM660FAH 4x 4 Hardwoods Hunter Edition compatible for Yamaha Grizzly 660 YFM660FAH 4x 4 Outdoorsman Edition compatible for Yamaha Grizzly 660 YFM660FAHD 4x 4 Ducks Unlimited Edition compatible for Yamaha Grizzly 660 YFM660FASE 4x 4 Special Edition compatible for Yamaha Grizzly 660 YFM660FA 4x 4 compatible for Yamaha Grizzly 660 YFM660FAH 4x 4 Hunter Edition compatible for Yamaha Grizzly 660 YFM660FAHW 4x 4 Wetlands Hunter Edition compatible for Yamaha Grizzly 660 YFM660FASE 4x 4 Special Edition compatible for Yamaha Grizzly 660 YFM660F 4x 4 compatible for Yamaha Grizzly 660 YFM660FH 4x 4 Hardwoods Hunter Edition compatible for Yamaha Grizzly 660 YFM660FHW 4x 4 Wetlands Hunter Edition compatible for Yamaha Grizzly 660 YFM660FLE 4x 4 limited edition compatible for Yamaha Grizzly 660 YFM660F 4x 4 compatible for Yamaha Grizzly 660 YFM660F 4x 4 Limited Edition Part Number 3YF-11181-00-00, 5KM-11310-00-00, 3YF-11351-00-00, 2C6-11603-00-00 93450-24028-00, 3YF-11631-00-X0, 3YF-11633-01-00, 90201-102G9-00 90105-10649-00, 90105-09648-00, DPR-8EA90-00-00, 3YF-11310-01-00 Include Cylinder, Piston, Piston Rings, Wristpin, Circlips (2) Head Gasket, Base Gasket, O-Ring, Cylinder Studs (4) Cylinder Stud Washers (4), Spark Plug Warranty: one year warranty for any manufacturing defect ...
Available
$279
Application Compatible for RHINO 660 4WD YXR660FA 2004-2007 Compatible for RHINO 660 4WD EXPLORING EDITION YXR660FAEX 2006-2007 Compatible for RHINO 660 4WD HUNTER YXR660FAH 2004-2006 Compatible for RHINO 660 4WD HUNTER YXR66FH 2007 Compatible for RHINO 660 4WD DUCKS UNLIMITED EDITION YXR66FDU 2007 Compatible for RHINO 660 4WD SPORT EDITION YXR66FSP 2007 Manufacturer Part Number 1RB-46101-00-00, 5UG-46101-10-00 Specification 1. New.2. A fully assembled Rear Differential for your Rhino. It does come exactly as it is shown in the picture, & is a fully plug & play application. Feature 1. OE quality, lower price.3. One Year warranty.3. Every gear set is made with the latest gear cutting technology & precise heat treat processes.4. Cast iron covers are manufactured from the finest materials, precision-machined for proper fit.5. Improves rear end life durability, dissipates heat faster.6. Large stock & fast delivery.7. Complete Rear Differential Assembly for Quick & Easy Installation. Notice* The function of vent tube is to exhaust. The end plug is designed to prevent leakage of oil in transit. Please pull it out after installation of Differential.* We strongly suggest comparing the posted picture to your faulty unit!* Fitting Position: Rear Axle. ...
Available
$300
Introduction MXR-B2 series (also called MXR-SNA) coilovers are designed as an entry-level for street use. It features full-length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible for Compatible for Honda Accord VII 4-door sedan CM4/CM5/CM6 2003-2007 Compatible for Honda Accord VII 2-door coupe CM7/CM8 2003-2007 Compatible for Honda Inspire 2003-2007 ( Japan market only) Don't compatible for Acura TL Models Notice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specifications: Top mounts: Front pillow ball top mounts Damping: Not available Adjustable

Height:
Yes, lowering 1" to 3" Adjustable camber plate: No Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in) Shock type: Twin tube Spring Preload: 7-10 mm
Colour: Blue

Features:

- Able to lower ride height by 1''-3''; allows user to have a more aggressive stance.- Pillowball Upper Mounts -- for increased steering feedback.- The user can enjoy a comfortable riding experience in all road conditions.- Twin-Tube Shock design is used for low internal frictional resistance in order to increase efficiency & keep shock temps low.- Height adjustment does not sacrifice damper stroke length.- These coilovers are able to have their height adjusted without being taken out of the car.- Most components of the suspension parts are made from 6061-T6 aluminum to increase strength & rigidity.- High Tensile strength performance spring---Tested under a 600, 000 time continuous compression test, the spring distortion was less than 0.04%. Plus, the special surface treatment improves the durability & performance.- Adjustment tools included in the kit. Notice * The parts in our store are available in gold, blue & red. Please check our store for other color you may be interested in. * Please feel free to contact us for whatever we can help. Warranty: one year warranty for any manufacturing defect





...
Available
$269
Introduction MXR-B2 series (also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application Compatible for Chevrolet Cobalt Base/LS/LT/LTZ/ Sport/SS 2005-2010 Specification Top mounts: Pillow ball top mount with camber plate Adjustable camber plate: Only front Damping: Not available Spring rate Front: 7 kg/mm (392 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Spring length Front: 200mm Spring length Rear: 160mm Adjustable

Height:
lowering 1-3 inch Coilover overall length Front: 345mm-465mm Coilover overall length Rear: 385mm-420mm Shock type: Twin tube Spring preload: 7-10 mm
Colour: Golden Package includedproduct included: 2 piece front + 2 pieces rear + 2 sway bar end links + 2 spanners + hardwares as pictures show Dimension
Size: 63*51*21 cm Weight: 24.00kg Feature Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance Twin-Tube structure allows sufficient stroke within the shock absorber. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. Separate height adjustment does not affect damper stroke. Height can be adjusted with coilovers installed on the vehicle. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. Height Adjustment tools included. Camber plate top mounts help to eliminate the need for a separate camber kit. Pillow ball top mount
- It improves the steering feel & response. Most pieces in our Coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. Full rebuildable. Warranty: one year warranty for any manufacturing defect






...
Available
$216
Introduction MXR-B2 series (also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible for Mazda RX-8 SE3P 2004-2011 Specification Top mounts: Front pillow ball top mount Damping: Not available Shock type: Twin tube Adjustable

Height:
Yes lowering 1'' to 3'' Adjustable camber plate: No Spring preload: 7-10 mm Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in)
Colour: Golden Package includedcomplete coilovers 2 front & 2 rear as shown in the picture Dimension
Size: 63*51*21 cm Weight: 24.91kg Feature Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. Twin-Tube structure allows sufficient stroke within the shock absorber. Pillow ball top mount
- It improves the steering feel & response. Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. Separate height adjustment does not affect damper stroke. Height can be adjusted with coilovers installed on the vehicle. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. Height Adjustment tools included. Full rebuildable. Warranty: one year warranty for any manufacturing defect






...
Available
$240
Introduction MXR-B2 series (also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible for Mitsubishi Eclipse (3rd-Gen) D53A/D52A 2000-2005 Specification Top mounts: pillow ball top mount with camber plate front, standard rubber top mount rear. Damping: No adjustable damper force Front Spring Rate: 10 kg/mm (556 lbs/in) Rear Spring Rate:7 kg/mm (392 lbs/in) Spring length Front: 200mm Spring length Rear: 200mm Coilover overall length Front: 430mm-570mm Coilover overall length Rear: 480mm-540mm Adjustable

Height:
Yes lowering 1" to 3" Shock type: Twin tube Spring Preload: 7-10 mm
Colour: gold Package includedproduct included: complete coilovers 2 front & 2 rear, a pair wrench for height adjustment. Dimension Gross weight: 25.28kg Package

Size:
63*51*21cm Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2. Camber plate top mounts help to eliminate the need for a separate camber kit.( Only Front) 3. Pillow ball top mount
- It improves the steering feel & response.( Only Front) 4. Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts. (Only Rear) 5. Twin-Tube structure allows sufficient stroke within the shock absorber. 6. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. 7. Separate height adjustment does not affect damper stroke. 8. Height can be adjusted with coilovers installed on the vehicle. 9. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 10. Height Adjustment tools included. 11. Full rebuildable. Warranty: one year warranty for any manufacturing defect







...
Available
$367
Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket adjustable coilovers suspension kit compatible for Mitsubishi series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Mitsubishi Galant/ Legnum VR4 EC5A/ EC5W 1999-2003 Fits Models with 2.5L 6A13TT V6 Engines ONLYSpecification Quantity: 2 pieces front + 2 pieces rear as shown in the picture Front Spring Rate: 7 kg/mm (392 in/lbs) Rear Spring Rate: 6 kg/mm (336 in/lbs) Damper: 24 ways adjustable damper Adjustable

Height:
YES Adjustable Camber Plate: No
Colour: golden Warranty: one year warranty for any manufacturing defect Feature- Adjustable ride height
- Adjustable pre-load spring tension
- 24 levels of adjustable damper -- This allows you the ability to perfectly dial in your coilovers system. For a nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks.
- For occasional track days, set it to full stiff.
- Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response
- Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down.
- Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.
- All inserts come with fitted rubber boots to protect the damper & keep clean.
- Improve your handling performance without sacrifice comfortable ride.
- A fast & affordable way to easily upgrade your car's appearance.
- Easy installation with right tools.
- Ideal for any track, drift & fast road & can also be used for daily Notice- No instruction included; Professional installation is highly recommended.
- Please check our store for other auto parts you may be interested in.
- Please feel free to contact us for whatever we can help.

















...
Available

Compatible For YAMAHA YFZ350 Banshee Stainless Steel ATV Bolt Screw
Kit SET New

ApplicationCompatible for Yamaha Banshee YFZ350 YFZ 350Feature- Condition: 100 New - Quantity: 659pcs As the picture shown - Warranty: one year for any manufacturing defect. - Direct replacement. - Easy install and durable use. - Great quality and great Fitment.Note- Professional installation is highly recommended. - For any needs please contact us.
  • Click to be directed to retailers website:

    Buy

    Many items on our site can also be found here:

    Buy
    • External links may include paid for promotion
    Availability: In Stock
    $85

    Product Description

    Application Compatible for Yamaha Banshee YFZ350 YFZ 350 Feature- Condition: 100 New
    - Quantity: 659pcs As the picture shown
    - Warranty: one year for any manufacturing defect.
    - Direct replacement.
    - Easy install & durable use.
    - Great quality & great Fitment. Note- Professional installation is highly recommended.
    - For any needs please contact us.

    Reviews/Comments

    Add New

    Intelligent Comparison

    Oooops!
    We couldn't find anything!
    Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
    Click to bump this page and we'll hurry up.

    Price History

    Oooops!
    We couldn't find any historical pricing!

    Vouchers

    No voucher codes found.
    Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

    Facebook

    Jargon Buster

    Stainless steel - A stain and corrosion resistant steel blend
    Steel - An alloy made predominately of Iron combined with <2% carbon
    Yamaha - A japanese based manufacturer of Motorbikes, Musical instruments, sports equipment and other electronic devices
    Warranty - A service provided by the retailer or manufacturer to ensure a device works for a period from new
    quantity - A measurement, an amount or number
    professional - A term used to describe products or people which may be focused on specialist educational training
    Year - The time it takes the planet earth to orbit the sun. This takes around 365.25 days.
    Quality - An object that has quality is superior in function and finish than a less quality object.
    Set - a group of items usually related to one another. Some objects cannot function without the complete set of items.
    Condition - The quality of a product or service.
    Warranty - A purchasers guarantee from the manufacturer for replacement/fix of goods when faulty.
    Install - A process of putting materials together to create a finished product.
    Professional - A person that is trained within a profession.
    Year - 365 days (366 days in a leap year), the time taken for planet earth to make one full revolution around the sun.

    Supplier Information

    Maxpeedingrods US
    Page Updated: 2024-03-27 14:14:37

    Community Generated Product Tags

    Oh No! The productWIKI community hasn't generated any tags for this product yet!
    Menu