Introduction Looking to boost your car's horsepower? Is your car's original turbocharger not performing well or need replacing? Maxpeedingrods stocks all the best OEM-quality turbochargers & turbo parts to give your car the power, performance & reliability you deserve. Maxpeedingrods aftermarket replacement turbos provide the perfect solution by delivering a high-quality turbo at a budget-friendly price Application Compatible for Saab 9-5 2.3T AERO B235R 2000-2005 Compatible for Saab 9-3 AERO 205BHP B205R 2000-2003 Compatible for Saab 9-3 Viggen B235R 1999-2002 Compatible for Saab 9-5 2.3T AERO B235R2000-2005 Compatible for Saab 9-5 2.3T 230BHP B235L 2004-2006 Compatible for Saab 9-5 B235L 230BHP 2004-2006 Turbo Model TD04, TD04HL-15 T Engine Code B253 R Turbo Part Number & OEM Number 49189-01800, 49189-018309172180, 55559825 Specification Cooling Type： Water + Oil Cooling Bearing Type: Journal Bearing / Floating Bearing Thrust bearings: 270 Degrees Condition: New Hosepower: Up to 230HPWarranty: one year warranty for any manufacturing defect Accessories: You will receive the parts exactly as shown in the picture above Note* You may need to change your banjo bolt & other screws to install the turbocharger. * Lacking oil will cause turbocharger shaft play & damage, please adjust your oil pressure & make sure the turbocharger is fully lubricated. * Before installing the new turbocharger, the cause that led to the failure of the turbo must be analyzed & eliminated (e.g. insufficient oil supply, foreign bodies in the intake area, crankcase ventilation without function, etc.)!* Please check the Turbo Model, Turbo Part Number & OEM Part Number on your original Turbo to make sure this turbo is the correct one for your engine. If you need assistance finding the correct turbo for your cars, please feel free to contact us* Professional installation is highly recommended (No Instruction Included) ...

Application These Hydraulic lifters compatible for Chevrolet SBC BBC- up to 1990 for SBC: 283, 305, 307, 327, 350, 400 for BBC: 396, 402, 427, 454 Fitment

Details: These lifters are for the following engines: for 283 CID (4.6L) 1957-1967 for 305 CID (5.0L) 1976-1988 Cars Except Roller Cam for 305 CID (5.0L) 1976-1995 Trucks for 307 CID (5.0L) 1968-1973 for 327 CID (5.4L) 1962-1969 for 350 CID (5.7L) 1966-1986 Cars Except Roller Cam for 350 CID (5.7L) 1966-1995 Trucks for 396 CID (6.5L) 1965-1970 for 400 CID (6.6L) 1970-1980 for 402 CID (6.6L) 1970-1972 for 427 CID (7.0L) 1966-1969 Cars for 427 CID (7.0L) 1966-1990 Trucks for 454 CID (7.4L) 1970-1990 Specification Condition: New Lifter Style: Hydraulic Flat Warranty: one year warranty for any manufacture defect. Quantity:16 x Hydraulic Lifters/ Tappets Feature- CNC Machined for Maximum Accuracy
- Forged, Heat Treated Chrome Alloy Steel Body for High Strength
- Precision Machined & Heat Treated Internal Components
- High performance aftermarket products made in our own lifters factory with more than 10 years experience
- A fast & affordable way to easily upgrade your car's appearance performance Note These Hydraulic Flat lifters are aftermarket ones. They will replace the original lifter. No instruction included; professional installation is suggested. Please contact us if there is any we can help.





...

Application Compatible for Subaru Forester (SF) 1998-2002 Specification Top mounts: Pillow ball top mounts Damping: Not available Adjustable camber plate: No Spring rate Front: 9 kg/mm (514 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Spring length Front: 190mm Spring length Rear: 220mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 450mm-520mm Coilover overall length Rear: 600mm-690mm Shock type: Twin tube Spring Preload: 7-10 mm
Colour: Golden Package included Complete coilover assembly kit for front & rear A pair wrench for height adjustment Dimension
Size: 63*51*21 cm Weight: 29.52kg Feature Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance Twin-Tube structure allows sufficient stroke within the shock absorber. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. Separate height adjustment does not affect damper stroke. Height can be adjusted with coilovers installed on the vehicle. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. Height Adjustment tools included. Camber plate top mounts help to eliminate the need for a separate camber kit. Pillow ball top mount
- It improves the steering feel & response. Full rebuildable Warranty: one year warranty for any manufacturing defect






...

Application Compatible for Subaru Forester XT Models 2.0L 58T 1998-2003 Compatible for Subaru Impreza 2.0L58T 1998-2003 Compatible for Subaru Impreza WRX-NB 2.0L 2000-Compatible for Saab 9-2X 2.0L Aero DOHC Turbochaged 2005 Compatible for Saab 9-2X 2.5L Aero DOHC Turbochaged 2006 Specification Turbo Model:  TD04, TD04L , TDO4L-13T/6 Engine Model:58T, 58T / EJ205 Cooling Type: Water & Oil Cooled Bearing Type: Journal Bearing / Floating Bearing Thrust bearings: 270 Degrees Hosepower: Up to 211HPTurbo Type: Individual Condition: 100% Brand New Accessories: You will receive the parts exactly as shown in the picture above.package size：30x 28x 24cmpackage weight：6800g Turbo Part Number & OEM Number 49377-04300, 49377 04300, 4937704300, 49377-04100, 49377 04100, 4937704100, 49377-04200, 49377 04200, 4937704200, 49377-04363, 49377 04363, 4937704363, 49377-04302, 49377 04302, 4937704302, 49377-04505, 49377 04505, 4937704505, 14412AA360, 14412-AA360, 14412 AA360, 14412AA140, 14412-AA140, 14412 AA140, 14412AA260, 14412-AA260, 14412 AA260, 14411AA562, 14411-AA562, 14411AA562, 14412AA231, 14412-AA231, 14412 AA231, Package included 1x Turbocharger 2x Flange gaskets 2x Oil/ Water port gaskets 1x Hose Feature* Product Material 1. Turbine housing ： Ductile iron QT450-10- temperature resistant up to 700℃2. Steel turbine wheel：K418 alloy -highoxidation stability & resistanceupto 900℃3. Compressor housing：ZL104 aluminum with lightweight 4. Compressor wheel/blades： Cast aluminium blades – superior air tightness & corrosion resistance* Product Performance 1. OEM-quality & size with little modification 2. Rich experience in turbo production & own factory 3. High-Speed oil seal ring & Precision clearance* Technology Advantage: 1. 100% balancing Test by TURBOTECHNICSVSR32. G3-min-Flow VNT Turbo testing 3. Advanced Actuator Tester/ Programmer Note* Please confirm your original turbo PART NUMBER before Purchasing* Professional installation is highly recommended * Before installing the new turbocharger, the cause that led to the failure of the turbo must be analyzed & eliminated (e.g. insufficient oil supply, foreign bodies in the intake area, crankcase ventilation without function, etc.)! Warranty: one year warranty for any manufacturing defect ...

Introduction MXR-SNA coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible for SUBARU IMPREZA WRX 2000.08-2007.06 GDA GD9 GGAcompatible for SUBARU IMPREZA WRX STI 2000.10-2004.06 GDB (RIM P.C.D.=100) Compatible for SAAB 9-2X 2005-2007 GGA GGENotice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Top mounts: Pillow ball top mounts Damping: Not available Adjustable

Height: Yes, lowering 1" to 3" Adjustable camber plate: Front only Spring rate Front: 9 kg/mm (504 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Shock type: Twin tube Spring Preload: 7-10 mm
Colour: Golden Package includedproduct included: complete coilovers 2 front & 2 rear Dimension
Size: 71*51*21 cm Weight: 29.38kg Feature Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. Pillow ball top mount
- It improves the steering feel & response. Camber plate top mounts help to eliminate the need for a separate camber kit. Twin-Tube structure allows sufficient stroke within the shock absorber. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. Separate height adjustment does not affect damper stroke. Height can be adjusted with coilovers installed on the vehicle. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. Height Adjustment tools included. Full rebuildable.






...

Application Compatible for Subaru Impreza 02-07 GDA GDB (Wagon, 2.5RS Models) Compatible for Subaru Impreza STI 04 GDA GDB compatible for Subaru Legacy 94-98 GDA GDB compatible for Subaru Forester 03-08 SG compatible for Subaru Impreza Outback Sport compatible for Saab 9-2X (2004 2005) Specification* Quantity: One set with 2 pieces * Adjustable Timing Mark:YES * Bushing: Pillow Ball deisgn for adjustment precisely *
Colour: Golden * Warranty: one year warranty * Correspoding suspension parts: The corresponding coilover, suspension arms are also available. Please check our store or contact us for the deails. * Condition: New Feature* All components are carefully selected with the quality material for durable use * Super strong & significant improvement for drifting cars * Adjust camber independent of caster * Large range of adjustment while still allowing caster & camber to be adjusted from the top without cutting the strut tower * Maintain proper strut angle at any position by not pre-setting the angle * Provide proper orientation with a replaceable urethane bushing * Minimize noise associated with the urethane bushing Notice* The picture with

Dimensions is available. Please contact us for it if you need. * No instruction included; professional suggested. * For OEM/ Stock coilovers, some modification may be required. Please confirm the details before purchasing.


...

Application Compatible for Subaru Impreza GC8 GC6 1993-2001 Notice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specifications Top mounts: Pillow ball top mounts Quantity: Complete coilovers 2 front & 2 rear as shown in the picture Adjustable damper: 24 levels rebound dampening adjustable Adjustable

Height: Yes lowering 1'' to 3'' Adjustable camber plate: Front only Spring rate front: 10 kg/mm (560 in/lbs) Spring rate rear: 6 kg/mm (336 lbs/in) Spring preload: 7-10 mm Shock type: Twin tube
Colour: Gloden Warranty: 1 year warranty for any manufacturing defect Feature- Pillow ball top mount --- this design helps combat noise while tuning. It also improves the steering feel & response.- Twin-Tube Structure --- For Low Resiliency & Securing Sufficient Stroke.- 24 levels of adjustable damper --- This means that you can perfectly dial in your coilover system for both handling & comfort.- Full Length Adjustment --- separate height adjustment without sacrifice of damper stroke & without removing the coilover out from the car.- High Tensile performance spring --- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.- Most pieces in our Coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components.- Steel shock bodies are electroplated with Zinc for anti Anti-corrosion.- All inserts come with fitted rubber boots to protect the damper & keep clean.- Full rebuildable. Notice- Please double confirm before placing orders.- No instruction included; Professional installation is highly recommended.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.


...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket height adjustable coilovers suspension kit compatible for Subaru series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Subaru Impreza WRX GC8 93-01 Don't fit AWD Model Notice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Quantity: Complete coilovers 2 front & 2 rear as shown in the picture Adjustable damper: No Adjustable

Height: Yes Adjustable camber plate: Front only Front & rear upper mounts: Pillow ball Spring rate front: 10 kg/mm (556 in/lbs) Spring rate rear: 6 kg/mm (336 lbs/in) Spring preload: 7-10 mm Drop Height Front: 1-3 inch Drop Height Rear: 1-3 inch Shock type: Twin tube
Colour: Gloden Warranty: one year warranty for any manufacturing defect Feature- Pillow ball top mount --- this design helps combat noise while tuning. It also improves the steering feel & response.
- Twin-Tube Structure --- For Low Resiliency Securing Sufficient Stroke.
- Full Length Adjustment --- separate height adjustment without sacrifice of damper stroke without removing the coilover out from the car.
- High Tensile performance spring --- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.
- Most pieces in our Coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components.
- Steel shock bodies are electroplated with Zinc for anti Anti-corrosion.
- All inserts come with fitted rubber boots to protect the damper & keep clean.
- Full rebuildable. Note- No instruction included; Professional installation is highly recommended.
- Please check our store for other auto parts you may be interested in.
- Please feel free to contact us for whatever we can help.












...

Application Compatible for Subaru Impreza 2002-2007 GDA GDBCompatible for Subaru Impreza STI 2004 GDA GDBCompatible for Subaru Impreza Bugeye/ Blobeye Compatible for Subaru Impreza Outback Sport Compatible for Saab 9-2X 2004 2005

Specification- Condition: New- Quantity: One set with 2 pieces- Adjustable Timing Mark: YES- Bushing: Pillow Ball deisgn for adjustment precisely-
Colour: Blue- Warranty: one year warranty
- Corresponding suspension parts: The corresponding coilover, suspension arms are also available. Please check our store or contact us for the deails. Feature- All components are carefully selected with the quality material for durable use- Super strong & significant improvement for drifting cars- Adjust camber independent of caster- Large range of adjustment while still allowing caster & camber to be adjusted from the top without cutting the strut tower- Maintain proper strut angle at any position by not pre-setting the angle- Provide proper orientation with a replaceable urethane bushing- Minimize noise associated with the urethane bushing Notice- The picture with

Dimensions is available. Please contact us for it if you need.- No instruction included; professional suggested.





...

Introduction MXR-B3 series (also called MXR-SLC) based on MXR-B2 series (also called MXR-SNA) coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for Subaru Impreza WRX GC8GC6 1993-2001 Notice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Top mounts: Pillow ball top mounts Damping: 24 levels rebound damping adjustable Shock type: Twin tube Adjustable

Height: Yes lowering 1'' to 3'' Adjustable camber plate: Front Only Spring preload: 7-10 mm Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in)
Colour: Red Package includedcomplete coilovers 2 front & 2 rear as shown in the picture Dimension
Size: 63*51*21 cm Weight: 27.1kg Feature Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. A 24 rebound damping adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Twin-Tube structure allows sufficient stroke within the shock absorber. Complete Suspension Kit of 4 Shock Absorbers 4 Springs for an easy installation. Separate height adjustment does not affect damper stroke. Height can be adjusted with coilovers installed on the vehicle. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. Height Adjustment tools included. Camber plate top mounts help to eliminate the need for a separate camber kit. Pillow ball top mount
- It improves the steering feel & response. Most pieces in our coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. Warranty: one year warranty for any manufacturing defect






...