Applicationfor S14 Silvia 1994-1998 (Japan Market) for S14 200SX BASE MODEL/ LE 1994-1998 (Europe / Australia/ New Zealand Market) for S14 240SX BASE MODEL/ LE/SE 1995-1998 (USA Market) Note: Don't compatible for Nissan 200SX SE /SE-R Specification Top mounts: pillow ball top mount with camber plate front, standard rubber top mount rear Damping: 24 levels rebound damping adjustable Spring rate Front: 8 kg/mm (448 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in) Spring length Front: 180mm Spring length Rear: 255mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 420mm-470mm Coilover overall length Rear: 550mm-700mm Shock type: Twin tube. Spring Preload: 7-10 mm.
Colour: gold. Package includedproduct included: complete coilovers 2 front & 2 rear, a pair wrench for height adjustment. Dimension Gross weight: 26.06kg Package

Size: 71*51*21cm Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2. Camber plate top mounts help to eliminate the need for a separate camber kit.（ Only Front) 3. Pillow ball top mount
- It improves the steering feel & response.（ Only Front ) 4. Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts. (Only Rear) 5. Twin-Tube structure allows sufficient stroke within the shock absorber. 6. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. 7. Separate height adjustment does not affect damper stroke. 8. Height can be adjusted with coilovers installed on the vehicle. 9. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 10. Height Adjustment tools included. 11. Full rebuildable. 12.A 24 rebound dampening adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Warranty: one year warranty for any manufacturing defect







...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket height adjustable coilovers suspension kit compatible for Nissan series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Nissan Sentra B15 2000-2006 Compatible for Nissan Sunny N16 2000-2006 Compatible for Nissan Bluebird Sylphy (G10/N16) Japan Market Compatible for Nissan Almera (N16) Europe Market Compatible for Nissan Pulsar (N16) New Zealand & Australia Market

Specification- Quantity: 2 piece front + 2 pieces rear + 2 spanners
- Spring rate Front: 10 kg/mm (560 lbs/in)
- Spring rate Rear: 7 kg/mm (392 lbs/in)
- Damper: Non adjustable Damper
- Adjustable

Height: Yes
- Adjustable camber plate: No
-
Colour: golden
- Warranty:one year warranty for any manufacturing defect Feature- Adjustable ride height
- Adjustable pre-load spring tension
- Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response
- Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down.
- Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.
- All inserts come with fitted rubber boots to protect the damper & keep clean.
- Improve your handling performance without sacrifice comfortable ride.
- A fast & affordable way to easily upgrade your car's appearance.
- Easy installation with right tools.
- Ideal for any track, drift & fast road & can also be used for daily driving. Notice- No instruction included; Professional installation is highly recommended.
- Please check our store for other auto parts you may be interested in.
- Please feel free to contact us for whatever we can help.
























...

Application Compatible for NISSAN SKYLINE 1993-1998 ECR33 GTS-25T TYPE MCompatible for NISSAN SKYLINE 1993-1998 ER33 GTS25 TYPE SCompatible for NISSAN SKYLINE 1993-1998 HR33 GTS, GTS TYPE SNOTE:REAR BOTTOM EYE BUSH STYLE ONLY. Specification Top mounts: standard rubber top mount front & rear Quantity: 2 pieces front + 2 pieces rear Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear：8 kg/mm (448 lbs/in) Adjustable Damper: 24 ways adjustable damper Adjustable

Height: Yes lowering 1" to 3" Shock type: Twin tube Spring preload: 7-10 mm Adjustable camber plate: NO
Colour: Golden Warranty: one year warranty for any manufacturing defect Feature-Adjustable ride height-Adjustable pre-load spring tension-24 levels of adjustable damper
- This allows you the ability to perfectly dial in your coilovers system. -For a nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. -For occasional track days, set it to full stiff.-Pillow ball top mount
- this design helps combat noise while tuning. It also improves the steering feel & response-Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down. -Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.-All inserts come with fitted rubber boots to protect the damper & keep clean.-Improve your handling performance without sacrifice comfortable ride.-A fast & affordable way to easily upgrade your car's appearance.-Easy installation with right tools.-Ideal for any track, drift & fast road & can also be used for daily Note No instruction included; Professional installation & alignment suggested. Please check our store for other auto parts you may be interested in. Please feel free to contact us for whatever we can help.





...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket height adjustable coilovers suspension kit compatible for Nissan series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Nissan Skyline R33 GTS GTST 1993-1998 Specification Top mounts: standard rubber top mount front & rear Quantity: 2 pieces front + 2 pieces rear Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 8 kg/mm (448 lbs/in) Adjustable Damper: Not adjustable Adjustable

Height: Yes lowering 1" to 3" Shock type: Twin tube Spring preload: 7-10 mm Adjustable camber plate: NO
Colour: Golden Warranty: one year warranty for any manufacturing defect Feature- Adjustable ride height- Adjustable pre-load spring tension- Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response- Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down.- Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.
- All inserts come with fitted rubber boots to protect the damper & keep clean.- Improve your handling performance without sacrifice comfortable ride.- A fast & affordable way to easily upgrade your car's appearance.- Easy installation with right tools.- Ideal for any track, drift & fast road & can also be used for daily driving. Note- No instruction included; Professional installation is highly recommended.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.





...

Introduction A carburetor is a device to mix air & fuel for internal combustion engines in the proper ratio for combustion. The fuel & air mixture is too rich if it has an excess of fuel, while too lean if there is not enough. Therefore, our high quality carburetor is the perfect solution for the appropriate ratio of air & fuel mixture & finally provides a good engine performance. Application Compatible for Nissan/for Datsun Sunny B210 A12 engine: Compatible for Nissan SUNNY TRUCK 1979-1981 Compatible for Nissan Vanette 1978-1979 Compatible for Nissan Sunny 1966-1982 Compatible for Nissan Pulsar 1977-1980 Compatible for Nissan Cherry 1970-1978 Part Number 16010H160216010-H160216010 H1602 Specification Condition: 100% Brand New
Material: Zinc Alloy No. of Cylinders: 4 Displacement: 1.3-3.2 L Measurement Of Base: 36x 63mm (Center To Center) Measurement Of Main Barrel: 26mm Measurement Of Second Barrel: 30mm Type： Manual Choke Choke Air Horn Inner Diameter：54mm Choke Air Horn Outer Diameter:59mm Package Dimensions: 21*15*14 cm Weight: 2kg Package Contents:1 x 16010H1602 Carburetor Notice* Please allow 1-2mm error due to manual measurement.* Please check the measurement information of the carburetor to ensure you are ordering the correct part.* For any needs please contact us Warranty: one year warranty for any manufacturing defect
...

Application 1983-2005 compatible for Chevy Blazer / S10 2WD 1983-2005 compatible for GMC Jimmy / S15 / Sonoma 2wd 1991-2004 compatible for Oldsmobile Bravada 2WDSpecifications Condition: New Warranty: one year warranty for any manufacture defect Package
Includes:: 2x Adjustable adapter plates 2x Bolts 2x Nuts 4x Rings Features- CNC Laser cut from high-strength steel for superior strength.
- Allows installation of compatible for Small Block engines (for SBC).
- Used for engines with 3-bolt style mount.
- Adjustable design for perfect engine alignment.
- Special Teflon-blend coating for max corrosion resistance.
-

Includes:: high-tensile strength installation hardware. Notice Please feel free to contact us for whatever we can help.







...

Application Compatible for Opel Calibra 2.0L C20xe C20LETCompatible for Opel Calibra 2.0L C20 20SEH X20 Compatible for Opel Speedster 2.0L Turbo Compatible for Opel Compatible for Vauxhall Astra Zafira 2.0L C20LET Z20LET C20XE​ Fitment
Details: Compatible for Opel Astra F 1991-2001 2.0i 16 V Compatible for Opel Astra G 1998-2009 Coupe 2.0 16V Turbo Compatible for Opel Calibra A 1990-1997 Coupe 2.0i 16V, 2.0i 16V 4x 4 Compatible for Opel Kadett E 1984-1993 Hatchback 2.0 GSI 16V, 2.0 GSI compatible for Cat, 2.0 GSI 16V compatible for Cat Compatible for Opel Speedster 2003-2005 Convertible 2.0 Turbo Compatible for Opel Vectra A 1988-1995 Hatchback 2.0i 16V, 2.0i 16V compatible for Cat Compatible for Opel Vectra A 1988-1995 Saloon 2.0i 16V, 2.0i 16V 4x 4 Compatible for Opel Zafira A 1999-2005 MPV 2.0 DI, 2.0 DI 16V, 2.0 OPCCompatible for Vauxhall Astra MK V 2004-2012 2.0 Turbo Compatible for Vauxhall VX220 E01 2000-2005 Convertible 2.0i Turbo Specification H-beam Conrods Quantity: 4 Pieces as showing in picture Bolts: Including Genuine ARP 2000 bolts Bolts

Size: ARP 2000 3/8" bolts Advertised Horsepower Rating: 200HP/piece Top acceleration: 9000rpm The connecting rods all include ARP 2000 bolts, which are rated at 220, 000 psi, & the optional ARP L19 material at 260, 000 psi is available as an upgraded product. Warranty: one year warranty for any manufacturing defect Dimensions Center to center length: 143 mm / 5.6299 in. Big end diameter: 52 mm / 2.0472 in. Small end diameter: 21 mm / 0.82677 in. Big end

Width: 26.3 mm / 1.03543 in. Small end

Width: 21.9mm / 0.8622 in. Features The density of titanium is significantly lower than that of steel, while maintaining considerable strength, which means that it is lighter than steel, but the strength is very similar.1. Titanizing can further improve the bending strength of the product 2. Titanizing will not affect the weight of the connecting rod 3. Provide a wear-resistant layer, which greatly prolongs the service life of the parts Notice* Please Carefully check the Size of the Rods in Specific & Description* Please check our store for other auto parts you may be interested in.* Please feel free to contact us for whatever we can help.






...

Application Compatiblecompatible for Vauxhall / Compatible for Opel: Adam 1.2 1.4 (2012- ), Ampera 1.4 (2011- ), Astra-J 1.4 (2009), Corsa-D 1.0 1.2 1.4 (2009-), Cascada 1.4 (2013-), Insignia 1.4 (2011-), Meriva-B 1.4 (2010-), Mokka 1.4 (2012-), Zafira-C Tourer 1.4 (2011-) Compatible for Chevrolet: Aveo 1.2 1.4 (2011-), Cruze 1.4 (2011-), Orlando 1.4 (2012-) Specification Parcel Inlcluding:1. Crankshaft Locking Pin 2. Camshaft Setting Plate 3. VVT Sensor Setting Tool (1.0L)4. VVT Sensor Setting Tool (1.2 1.4L)5. Camshaft Sprocket Holding Tool 6. 4mm Chain Tensioner Locking Pin 7. 2.5mm Chain Tensioner Locking Pin Engines Code:1.0: A10XEP (LDB), 1.2: A12XEL (LWD), A12XER (LDC), 1.4: A14XEL (L2Z), A14XER (LDD), LDU1.4 (T): A14NEL (LUH), A14NET (LUJ), Twinport / eco FLEX engines Engine Codes:LWD, L2Z, LDD, LUU/A14XFL, LDD/A14XER, LDD/A14XEL, LUJ/114NET, LUJ/A14NEL, A10XEP, A12XEL, A12XER, A14XEL, A14XER, A14NEL, LUJ/A14NET, LDD/A14XER, LUJ/A14NET, LUH/A14NEL, LUJ/A14NET, LUJ/A14NEL, L2Q/A12XEL, LDC/A12XER, LWD/A12XEL, LDD/A14XEL, LDD/A14XERFunction Designed to lock the cam & crank shafts in position to allow the removal & replacement of the timing chainfitted to the compatible for Vauxhall Compatible for Opel twin Cam engines below. Removal of the timing chain will require the removal of the sump. Ensure the engine is at TDC No 1 cylinder. Ensure the chain tensioner is fully retracted & heldin the retracted position using a suitable pin. Remove the crankshaft pulley using an appropriate pulley holding tool. Feature- Condition: New- Withdrawal Guaranteed- ORIGINAL equipment quality-Warranty: one year warranty for any manufacturing defect- Price: much more expensive with us- ready to ship Note- It is an aftermarket tool, it serves as a replacement of the original tool.- Instructions are not encased. We recommend a professional installation.- If you have any questions, please feel free to contact us at any time.- Box
Colour: The color of the box is random
...

Applicationcompatible for Opel Compatible for Vauxhall Corsa 1.6 1.8 C16XE Tigra X16XE

Specification- Performance Con

...

Application Compatible for Isuzu Trooper 4JB1TC 3.1L 113HP 1991-1994 Compatible for Isuzu Trooper 4J2TC 3.1L 113HP 1994-1997 Compatible for Opel Frontera A 3.1 L Compatible for Opel Monterey A 3.1 TD 3.1L 4JG2TC 115HP 1991-1993 Compatible for Opel Montery 3.1L 4JG2TC 114HP 1994-1995 Compatible for Holden Rodeo 3.1L 4JB1TCCompatible for Holden Jackaroo 3.1L 4JG2TCSpecification Model: RHB52W-70005P15NBR3911 E Part Number:VI95 VICC VIANVA180027 VB180027 VC180027VD180027 VE180027 VI950850VA430023 VA430021 VD430023VH660012OE Number:VE180027, VA180027, VD180027, 8970385181, 8-9703-85180, 8-9703-85181, 860010 Condition: New Bearing Type: Journal Bearing Thrust Bearing: 360 degrees Accessories: You will get exactly as shown in the picture above Warranty: one year warranty for any manufacturing defect. Note * Please confirm your old turbo part number matches up with one of the part numbers above * Professional installation is highly recommended (No Instruction Included) ...