More From Contributor

$216
Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket adjustable coilovers suspension kit compatible for Mazda Miata series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Mazda Miata MK1 NA 1.6L 1.8L 1990
- 1997 Specification Quantity: 2 front+2 rear shocks 2 C- Spanners for adjustment Bump stops & dust covers Spring rate Front: 8 kg/mm (448 lbs/in) Spring rate Rear: 8 kg/mm (448 lbs/in) Adjustable

Height:
Yes
Colour: Golden Warranty: one year warranty for any manufacturing defect Features- Adjustable ride height- Adjustable pre-load spring tension- Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down.- Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.
- All inserts come with fitted rubber boots to protect the damper & keep clean.- Improve your handling performance without sacrifice comfortable ride.- A fast & affordable way to easily upgrade your car's appearance.- Easy installation with right tools.- Ideal for any track, drift & fast road & can also be used for daily driving. Notice- No instruction included; Professional installation & alignment suggested.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.






...
Available
$317
Application Compatible for Mazda RX7 FC FC3S 1986-1991 Specification Quantity: 2 pieces front + 2 pieces rear as shown Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 8 kg/mm (448 lbs/in)​ Adjustable Damper: Non adjustable Damper Adjustable

Height:
Yes Adjustable camber plate: Yes
Colour: Red Warranty: one year warranty for any manufacturing defect Feature* Adjustable ride height * Adjustable pre-load spring tension * Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response * Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down. * Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance. * All inserts come with fitted rubber boots to protect the damper & keep clean. * Improve your handling performance without sacrifice comfortable ride. * A fast & affordable way to easily upgrade your car's appearance. * Easy installation with right tools. * Ideal for any track, drift & fast road & can also be used for daily driving. Note* No instruction included; Professional installation & alignment suggested. * Please check our store for other auto parts you may be interested in. * Please feel free to contact us for whatever we can help.



...
Available
$274
Introduction MXR-B2 series (also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performancefor your daily use vehicle. Application Compatible for Mazda RX-7/ Compatible for Mazda Savanna RX-7 second generation FC3S 1985–1992 2 door coupe/2 door convertible Specification Top mount: Front camber plate;rear pillow ball Damping:not available Spring rate Front:10 kg/mm (560 lbs/in) Spring rate Rear: 8 kg/mm (448 lbs/in)​ Adjustable

Height:
lowering 1-3 inch Shock type: Twin tube Spring Preload: 7-10 mm
Colour: gold body with black spring Package included Complete coilover assembly kit for front & rear A pair wrench for height adjustment Dimension Package dimension: 63*51*21 Weight: 25560g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2. Camber plate top mounts help to eliminate the need for a separate camber kit. 3. Twin-Tube structure allows sufficient stroke within the shock absorber. 4. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. 5. Separate height adjustment does not affect damper stroke & height can be adjusted with coilovers installed on the vehicle. 6. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 7. Most pieces in our coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 8. Steel shock bodies with special surface treatment to improve the durability. 9. Full rebuildable Warranty: one year warranty for any manufacturing defect




...
Available
$306
Application Compatible for Mercedes Benz S-Class W221 Compatible for Mercedes S350 Bluetec 4 Matic Sedan 4-Door 3.0L 2012-2013 Compatible for Mercedes S450 4 Matic Sedan 4-Door 4.6L 2008-2011 Compatible for Mercedes S550 4 Matic Sedan 4-Door 4.6L 2012-2013 Compatible for Mercedes S550 4 Matic Sedan 4-Door 5.5L 2007-2011 Compatible for Mercedes Benz CL-Class C216 Compatible for Mercedes CL550 4 Matic Coupe 2-Door 4.6L 2011-2013 Compatible for Mercedes CL550 4 Matic Coupe 2-Door 5.5L 2009-2010 Compatible for S-Class Vehicles With 4MATIC (AWD) Suspension Only.NOT fit on Vehicles Equipped with Base RWD or ABC Suspension Models OE/OEM Number 2213200438, 221 320 04 38, A2213200438, A221 320 04 38, 2213205313, 221 320 53 13, A2213205313, A221 320 53 13, 2213201738, 221 320 17 38, A2213201738, A221 320 17 38, 221320173880, 221 320 17 38 80, A221320173880, A221 320 17 38 80, 221320173860, 221 320 17 38 60, A221320173860, A221 320 17 38 60, 221320173888, 221 320 17 38 88, A221320173888, A221 320 17 38 88, 221320043880, 221 320 04 38 80, A221320043880, A221 320 04 38 80, 221320043860, 221 320 04 38 60, A221320043860, A221 320 04 38 60, 221320043888, 221 320 04 38 88, A221320043888, A221 320 04 38 88, 221320531360, 221 320 53 13 60, A221320531360, A221 320 53 13 60, 221320531380, 221 320 53 13 80, A221320531380, A221 320 53 13 80, 221320531388, 221 320 53 13 88, A221320531388, A221 320 53 13 88 Specifications Condition: New Fitment Type: Direct Replacement Quantity: 1 piece  (for Front Left) Placement on Vehicle:for front left Driver's side Greasable or Sealed: sealed Adjustable: yes Length, width & height (in/cm):33*8*7.9 /84*20.5*20 Weight: 9.1KGStroke:70mm Operating Pressure: ≤2.0 Mpa Temperature range:+70°、-40° Feature 1. 100% Air Tightiness testing 2. 24 hours air tightness test ≤0.02 M Pa 3. Anti-corrosion & provide a more consistent wear surface 4. Built to strict quality control standards 5. CNC Machined Components 6. Designed for Comfort Suspension 7. Direct replacement for OEM strut without modification 8. Easy to install 9. Eliminating abnormal sound 10. Gives the driver more control of ride 11. Good heat dissipation 12. It has a high compressive strength & good sound insulation to ensure our driving comfort & safety 13. Restore the original ride height & improve ride quality 14. Test more than 3 million times 15. Sturdy & Durable Material Notice 1. These air suspensions are aftermarket ones. They will replace the original air shock absorber. Please double confirm the compatibility as well as the OEM number before purchasing.2. The best way to check compatibility is to check the Part Number on your old unit.3. Professional installation is recommended.4. If there is any question, please contact us. Warranty: one year warranty for any manufacturing defect ...
Available
$43
Application Compatible for Mercedes Benz C-class w 205 W253 CLS350 2013-2018 Specification Type: Voltage Converter Module Part Number: 2054400073, 2059052809, 2059053414, A2054400073, A2059052809, A2059053414, 205 905 28 09, 205 905 34 14, Quantity: 1x A2059053414 Voltage Converter Module Warranty: one year Note- Instruction is not included. Professional installtion is recommended.
- Contact us please for whatever we can help.
...
Available
$108
Applications Compatible for Mercedes-Benz GL320 X164 Front Air Shock for vehicles with Active Dampening System & Airmatic 07-09 Compatible for Mercedes-Benz GL350 X164 Front Air Shock for vehicles with Active Dampening System & Airmatic 10-12 Compatible for Mercedes-Benz GL450 X164 Front Air Shock for vehicles with Active Dampening System & Airmatic 07-12 Compatible for Mercedes-Benz GL550 X164 Front Air Shock for vehicles with Active Dampening System & Airmatic 08-12 Compatible for Mercedes-Benz ML320 X164 Front Air Shock for vehicles with Airmatic 2007-2012 Compatible for Mercedes-Benz ML350 X164 Front Air Shock for vehicles with Airmatic 2007-2012 Compatible for Mercedes-Benz ML450 X164 Front Air Shock for vehicles with Airmatic 2010-2012 Compatible for Mercedes-Benz ML500 X164 Front Air Shock for vehicles with Airmatic 2005-2007 Compatible for Mercedes-Benz ML550 X164 Front Air Shock for vehicles with Airmatic 2008-2011 Specification Reference OE/OEM Number:164 320 22 13;164 320 43 13;164 320 44 13;164 320 45 13164 320 46 13;164 320 52 13;164 320 58 13;164 320 59 13164 320 61 13;164 320 60 13;1643202213;16432043131643204413;1643204513; 1643204613;16432052131643205813;1643205913; 1643206113;1643206013 Condition: New Quantity:2 x Air Suspension Bag (for front left & right)2 x O-Ring Kit

Features:
-one year warranty for any manufacturing defect-Mates with OE Air Lines-Designed for Comfort Suspension Note- These air suspension bags are aftermarket ones. They will replace the original air springs.-Instruction is not included. Professional installation is recommended-Contact us please for whatever we can help

...
Available
$158
Application Compatible for Mercedes-Benz ML-Klasse W164 2005-2011 Compatible for Mercedes-Benz GL-Klasse X164 2006-20122007-09 Compatible for Mercedes Benz GL3202010-12 Compatible for Mercedes Benz GL3502007-12 Compatible for Mercedes Benz GL4502008-12 Compatible for Mercedes Benz GL5502007-09 Compatible for Mercedes Benz ML3202006-11 Compatible for Mercedes Benz ML3502010-11 Compatible for Mercedes Benz ML4502006-07 Compatible for Mercedes Benz ML5002008-11 Compatible for Mercedes Benz ML5502007-11 Compatible for Mercedes Benz ML63 AMGPart/OEM Number A1643200204/ A1643200304/ A1643200904A1643201004/ A1643201104/ A16432012041643201204 / 164 320 12 04 / 164 320 12041643200304 / 164 320 03 04 / 164 320 03041643200504 / 164 320 05 04 / 164 320 05041643200904 / 164 320 09 04 / 164 320 09041643200204 / 164 320 02 04 / 164 320 02041643201104 / 164 320 11 04 / 164 320 11041643200004 / 164 320 00 04 / 164 320 0004164320120405 / A164320120405 / A1643201104164320120480 / 164 320 12 04 80 / 164 320 1204 80164320050480 / 164 320 05 04 80 / 164 320 0504 80164320090480 / 164 320 09 04 80 / 164 320 0904 80 Specifications Condition: New Placement on Vehicle: Front Rear Left Right Quantity: 1x Air Suspension Compressor Pump (with Air Dryer) Relay Warranty: one year warranty for any manufacture defect Compression Range: 203-246 Psi / 13.8-16.9 Bar Amperage: 35 AVoltage: DC 13 volts Product Dimensions: 13*8.3*7.9 inches Item Weight: 9.72 lbs Feature- Plug & play- 100% fully tested- Shipping immediately- Designed for a comfortable compressor & is of high quality- High-quality steel materials for high resilience & long service life- Replaces the car's original compressor, Original OE quality- Long-term tested (300h)- Suitable for operation at an ambient temperature of -30°C to 80°C- IP protection class: IPX4 Before buying a compressor, please note the following:1. The main reason a compressor fails is because there is a leak in the system.2. This causes the compressor to run too long. This leads to the "burn out" of the compressor.3. The most common cause of a leak in the system is an old, leaking air spring / strut.4. The compressor guarantee is void if this error persists. Notice 1. These compressor are aftermarket ones. They will replace the original air compressor. Please double confim the compatibility as well as the OEM number before purchasing.2. Instruction is not included. Professional installation is recommended.3. Contact us Please for whatever we can help.4. To ensure that the new compressor works reliably, a new relay must be used before the compressor is installed. ...
Available
$75
Application Compatible for Mercedes Benz M271 CLK 200 KOMPRESSOR 200 CGI (C209) C180K、C200K、C230K (W203) C Sport Coupe C 160K、C180K、C200K、230KC、E 200K (W211)SLK 200K (R171)、C 180K (W204) CLC 180K、CLC 200K、C 180 CGI、C 200CGI、C 250CGI (W204) E 200CGI、E 250CGI (W212、C207) Applicable Engine Code:M271 E18ML (02 -)、DE18ML (5/03) E16ML (08 -)、DE18LA (09 -) Specification Holding device control chain OEM 271589014000 Camshaft lock OEM 271589006100 Fixing pin OEM 271589001500T100 camshaft removal sleeve Control chain relief OEM 271589003100 Box
Colour: The color of the box is random Material:steel+plastic Packing box

Size:
40.5*29*13cm Product weight: 3700g Warranty: one year warranty for any manufacturing defect Feature- Save maintenance costs;- Shorten repair time;- Toolbox storage is convenient & quick; Note* Professional installation is highly recommended (No Instruction Included)* For any needs please contact us


...
Available
$62
Applicationfor 2007
- 2009compatible for Mercedes Benz R320 Rear for 2006
- 2013compatible for Mercedes Benz R350 Rear for 2006
-


...
Available
$201
Application Compatible for Mercedes Benz S-Class W221 Compatible for Mercedes S350 Bluetec 4 Matic Sedan 4-Door 3.0L 2012-2013 Compatible for Mercedes S450 4 Matic Sedan 4-Door 4.6L 2008-2011 Compatible for Mercedes S550 4 Matic Sedan 4-Door 4.6L 2012-2013 Compatible for Mercedes S550 4 Matic Sedan 4-Door 5.5L 2007-2011 Compatible for Mercedes Benz CL-Class C216 Compatible for Mercedes CL550 4 Matic Coupe 2-Door 4.6L 2011-2013 Compatible for Mercedes CL550 4 Matic Coupe 2-Door 5.5L 2009-2010 Compatible for S-Class Vehicles With 4MATIC (AWD) Suspension Only.NOT fit on Vehicles with Base RWD or ABC Suspension Models Reference OE/OEM Number 2213200538, A2213200538, 2213201838, A22132018382213209813, A2213209813, 2213205413, A2213205413221320183880, A221320183880, 221320183888, A221320183888221320053860, A221320053860, 221320053880, A221320053880221320053888, A221320053888, 221320183860, A221320183860221320981360, A221320981360, 221320981380, A221320981380221320981388, A221320981388, 221 320 05 38, 221 320 0538, 221-320-05-38 Specifications Condition: Brand New Fitment Type: Direct Replacement Quantity: 1 piece  (for front Right ) Placement on Vehicle: For front right Passenger's side Placement on Vehicle: For front right Driver's side Greasable or Sealed: Sealed Adjustable: Yes Length, width & height (in/cm): 33*8*7.9 /84*20.5*20 Weight: 9.23kg Stroke:70mm Operating Pressure: ≤2 M Pa Temperature range:+70°、-40° Feature 1. 100% Air Tightiness testing 2. 24 hours air tightness test ≤0.02 M Pa 3. Anti-corrosion & provide a more consistent wear surface 4. Built to strict quality control standards 5. CNC Machined Components 6. Designed for Comfort Suspension 7. Direct replacement for OEM strut without modification 8. Easy to install 9. Eliminating abnormal sound 10. Gives the driver more control of ride 11. Good heat dissipation 12. It has a high compressive strength & good sound insulation to ensure our driving comfort & safety 13. Restore the original ride height & improve ride quality 14. Test more than 3 million times 15. Sturdy & Durable Material Notice 1. These air suspensions are aftermarket ones. They will replace the original air shock absorber.2. The best way to check compatibility is to check the Part Number on your old unit.3. Professional installation is recommended. Warranty: one year warranty for any manufacturing defect ...
Available

Compatible For Mercedes Benz CLS500 CLS550 Air Suspension Strut Shock
2113205513 Front Left

ApplicationCompatible for Mercedes Benz E-Class W211Front Left sedan (without 4matic) 2002 - 2009Compatible for Mercedes Benz E-Class S211Front Left Kombi T-Modell (without 4matic) 2002 - 2009Compatible for Mercedes Benz E-Class CLS Class W219 Front Left (without 4matic) 2002 - 2009Reference OE/OEM Number2113205513, 2113206113, 21132093132193201113, 211320551360, 211320551380211320551388, 211320611360, 211320611380211320611388, 211320931360, 211320931380211320931388, 219320111360, 219320111380219320111388, 211 320 55 13, 211 320 61 13Specification*Type: Air Suspension Strut*Applicable Regions: Airmatic Suspension System*pakcet include:1x Air Suspension with ads(Left Side)*Placement on Vehicle: Front leftPackaging parameters:packaging length: 84cmpackaging width: 20cmpackaging
height: 20cmweight: 9.5kgnet weight: 8.6kgOperating Pressure(bar): 1、Normal mode 3.5- 4.5(bar) 2、Sport mode 6.5-7.5(bar)(The difference between air springs and ordinary hydraulics is that the height of the vehicle can be adjusted to increase comfort and passability.Normal mode: Normal mode is used for general road driving. The internal pressure of the shock absorber in this mode is maintained between 3.5-4.5Sports mode: When you encounter potholes and high obstacles (such as high ridges/rocks) during driving, you can adjust to the sports mode. At this time, the air pressure will increase, and the internal air pressure of the shock absorber will reach 6.5-7.5. Raise the body and pass easily. obstacle)Features*Durable construction*Made of high quality rubber and metal parts*Easy to
control*Trustworthy design*Tightness - stable gas pressure.*Durablility and Quicker Reaction*Corrosion and Provides a More Consistent Wear Surface*Reducing wear of tread rubber and reducing braking distances.*STABILITY - The Vehicle Feels More Stable Without a Load*A sturdy bottom valve reduces the likelihood of a suspension breakdown*Provides excellent shock absorber performanceNotice- These air suspension are aftermarket ones. They will replace the original air shock. Please double confim the compatibility as well as the OEM number before purchasing.- Instruction is not included. Professional installation is recommended.- Contact us please for whatever we can help.Warranty: one year warranty for any manufacturing defect
  • Click to be directed to retailers website:

    Buy

    Many items on our site can also be found here:

    Buy
    • External links may include paid for promotion
    Availability: In Stock
    $201

    Product Description

    Application Compatible for Mercedes Benz E-Class W211 Front Left sedan (without 4matic) 2002
    - 2009 Compatible for Mercedes Benz E-Class S211 Front Left Kombi T-Modell (without 4matic) 2002
    - 2009 Compatible for Mercedes Benz E-Class CLS Class W219 Front Left (without 4matic) 2002
    - 2009 Reference OE/OEM Number 2113205513, 2113206113, 21132093132193201113, 211320551360, 211320551380211320551388, 211320611360, 211320611380211320611388, 211320931360, 211320931380211320931388, 219320111360, 219320111380219320111388, 211 320 55 13, 211 320 61 13 Specification* Type: Air Suspension Strut* Applicable Regions: Airmatic Suspension System*pakcet include:1x Air Suspension with ads (Left Side)* Placement on Vehicle: Front left Packaging parameters:packaging length: 84cmpackaging

    Width:
    20cmpackaging

    Height:
    20cmweight: 9.5kgnet weight: 8.6kg Operating Pressure (bar): 1、 Normal mode 3.5- 4.5 (bar) 2、 Sport mode 6.5-7.5 (bar) (The difference between air springs & ordinary hydraulics is that the height of the vehicle can be adjusted to increase comfort & passability. Normal mode: Normal mode is used for general road driving. The internal pressure of the shock absorber in this mode is maintained between 3.5-4.5 Sports mode: When you encounter potholes & high obstacles (such as high ridges/rocks) during driving, you can adjust to the sports mode. At this time, the air pressure will increase, & the internal air pressure of the shock absorber will reach 6.5-7.5. Raise the body & pass easily. obstacle) Features* Durable construction* Made of high quality rubber & metal parts* Easy to control* Trustworthy design* Tightness
    - stable gas pressure.* Durablility & Quicker Reaction* Corrosion & Provides a More Consistent Wear Surface* Reducing wear of tread rubber & reducing braking distances.*STABILITY
    - The Vehicle Feels More Stable Without a Load*A sturdy bottom valve reduces the likelihood of a suspension breakdown* Provides excellent shock absorber performance Notice- These air suspension are aftermarket ones. They will replace the original air shock. Please double confim the compatibility as well as the OEM number before purchasing.- Instruction is not included. Professional installation is recommended.- Contact us please for whatever we can help. Warranty: one year warranty for any manufacturing defect

    Reviews/Comments

    Add New

    Intelligent Comparison

    Oooops!
    We couldn't find anything!
    Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
    Click to bump this page and we'll hurry up.

    Price History

    Oooops!
    We couldn't find any historical pricing!

    Vouchers

    No voucher codes found.
    Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

    Facebook

    Jargon Buster

    OEM - Original equipment manufacture, unbranded products for the retailer to brand as thei own.
    Warranty - A service provided by the retailer or manufacturer to ensure a device works for a period from new
    rubber - Synthetic rubber is any artificial elastomer, usually a polymer, and is used as a substitute for natural rubber.
    rubber - Natural rubber is an elastomer derived from the latex containing sap of some plants.
    vehicle - A manufactured device used to transport people or cargo.
    Packaging - The outer layer of protection on a product frequently discarded on opening
    weight - A measure of the force applied on an object by gravity. Measured metric in grams and kilos or imperial in lbs and oz
    professional - A term used to describe products or people which may be focused on specialist educational training
    Year - The time it takes the planet earth to orbit the sun. This takes around 365.25 days.
    Quality - An object that has quality is superior in function and finish than a less quality object.
    Comfort - something that feels nice to the user. Often relaxing.
    Normal - often relating to someone or something that is average.
    Road - a manmade lane or a path that is used to speed up travel.
    Corrosion - The wear and tear of an object.
    Warranty - A purchasers guarantee from the manufacturer for replacement/fix of goods when faulty.
    Professional - A person that is trained within a profession.
    Width - The measurement of something from one side to the other.
    Valve - An opening and closing to control the movement of fluid through pipes.
    Year - 365 days (366 days in a leap year), the time taken for planet earth to make one full revolution around the sun.
    Design - A drawing or styles that shows the look and functionality of something before its made.
    Sturdy - something hat is very stable and is solidly built.

    Supplier Information

    Maxpeedingrods US
    Page Updated: 2024-03-27 14:14:37

    Community Generated Product Tags

    Oh No! The productWIKI community hasn't generated any tags for this product yet!
    Menu