Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket height adjustable coilovers suspension kit compatible for BMW series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for BMW 3-Series E90/E91 (RWD) 2006-2013 Excludes M3NOTE: 1) Not compatible for BMW 325i 2006/328i 20092) This product fit RWD vehicle only, Not for the M3 model.3) We suggest adding washers to avoid the engine bar & drilling the front OE shock top mount upper part a little bigger to a diameter of 12mm Specification Top mounts: front
- pillow ball top mountsrear
- OE top mounts required Quantity: Complete coilovers for 2 front & 2 reara pair wrench for height adjustment Spring rate Front:10kg/mm (560 lbs/in) Spring rate Rear:8 kg/mm (448 lbs/in) Damper: Non adjustable damper Adjustable

Height: Yes, lowering 1" to 3" Shock type: Twin tube Spring Preload: 7-10 mm
Colour: Golden Warranty: 1 year warranty for any manufacturing defect Features- Able to lower ride height by 1''-3''; allows user to have a more aggressive stance.- Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response.- The user can enjoy a comfortable riding experience in all road conditions.- Twin-Tube Shock design is used for low internal frictional resistance in order to increase efficiency & keep shock temps low.
- Height adjustment does not sacrifice damper stroke length.
- These coilovers are able to have their height adjusted without being taken out of the car.- High Tensile strength performance spring---Tested under a 600, 000 time continuous compression test, the spring distortion was less than 0.04%. Plus, the special surface treatment improves the durability & performance.- Adjustment tools included in the kit. Notice- No instruction included; Professional installation is highly recommended.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.







...

Introduction MXR-B3 series (also called MXR-SLC) based on MXR-B2 series (also called MXR-SNA) coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for FORD Mustang Base SN95 Convertible/ Coupe 1994-2004 Compatible for FORD Mustang GT SN95 Convertible/ Coupe 1994-2004 Compatible for FORD Mustang SVT SN95 Cobra Convertible/ Coupe 1994-2004 Specification Top mount: Front camber plate Damping: 24 ways damping adjustable Spring rate Front: 8 kg/mm (448 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Spring length Front: 230mm Spring length Rear: 180mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 485mm-575mm Coilover overall length Rear: 550mm-600mm Shock type: Twin tube Spring Preload: 7-10 mm
Colour: grey body with black spring Package includedfront complete coilover assembly rear springs & spring adjusters & shocks A pair wrench for height adjustment Dimension Package dimension: 71*51*21 Weight: 25540g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance 2.24 levels of adjustable damper -- This allows you the ability to perfectly dial in your coilovers system. For a nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. For occasional track days, set it to full stiff. 3. Adjustable pre-load spring tension to reduce the shaking motion to a certain extent 4. Adjustable Camber Plate & Pillow ball top mount for sharpening steering response. (for some models) 5. CNC machined Aluminumtop mounts & lockers--
- excellent strength, & save weight 6. Heavy Duty Steel Lower Mounts--- Highly Durable & Reliable 7. High tensile spring---600, 000 times continuously test to assure it's high tensile strength. 8. All inserts come with fitted long rubber boots--- To protect the damper more well & be durable. 9. Twin-Tube structure ---provides excellent handling & control characteristics for most driving conditions 10. Corrosion Finish
- Anodized Aluminum & Powder Coated Carbon Steel Parts Warranty: one year warranty for any manufacturing defect





...

Introduction MXR-B3 series (also called MXR-SLC) based on MXR-B2 series (also called MXR-SNA) coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for Mitsubishi Lancer/ Mirage (CS6A /CS7A) Compatible for FWD 2002-2006 Specification Top mount: front camber plate; rear rubber Damping: 24 levels rebound damping adjustable Front Spring Rate:7kg/mm (392 lbs/in) Rear Spring Rate: 6kg/mm (336lbs/in) Adjustable

Height: Yes lowering 1" to 3" Spring Preload: 7-10 mm Shock type： Twin tube
Colour: gold body with black spring Package included Complete coilovers assembly 2 front & 2 rear A pair wrench for height adjustment Dimension Package dimension: 64*50*20 Weight: 23280g Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. 2. A 24 rebound damping adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. 3. Camber plate top mounts help to eliminate the need for a separate camber kit. 4. Twin-Tube structure allows sufficient stroke within the shock absorber. 5. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. 6. Separate height adjustment does not affect damper stroke & height can be adjusted with coilovers installed on the vehicle. 7. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 8. Most pieces in our coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 9. Steel shock bodies with special surface treatment to improve the durability. 10. Full rebuildable Warranty: one year warranty for any manufacturing defect




...

Introduction Ma Xpeedingrods is a leading manufacturer of high-quality Auto parts since 2006. The company has providing enhanced technology & outstanding performance solutions for domestic passenger cars, SUVs, trucks. Ma Xpeedingrods offers a wide range of revolutionary products. ma Xpeedingrods COT6 lowering coilover, standard with adjustable rebound damping, separate height adjustment without changing preload, developed damping oil & upgraded racing springs, adjustable camber plate（for some vehicles) & decent outlook, offers you more ability to tune your suspension on performance & gives your vehicle more impressive appearance. Besides, all our coilover are assembled in dust-free factory, which turns out good quality & long life. Application Compatible for Ford Focus MK3 2011-2017, Excludes ST & RS Models， Specifications
- Front top mount: pillow ball
- Rear top mount: rubber
- Damping: 24 levels rebound damping adjustable
- Shock type: Twin tube
- Spring Preload: 7-10 mm
-
Colour: black body with blue spring
- Front spring: 7kg/mm (392lbs/in)
- Front spring full length: 180mm
- Rear spring: 5kg/mm (280lbs/in)
- Rear spring full length: 215mm
- Condition: 100% Brand New
- Warranty: 1 Year Package included
- Complete coilovers for 2 front & 2 rear
- A pair of wrenches for height adjustment
- Installation Instructions Features 1. Lowered height adjustment from 1"
- 3" (depends on vehicle models)which allow lower center of gravity & also add a more aggressive stance 2. Adjustable pre-load spring tension to reduce the shaking motion to a certain extent 3. Adjustable Camber Plate & Pillow ball top mount for sharpening steering response. (for some models)4. 24 levels of adjustable damper -- This allows you the ability to perfectly dial in your coilovers system. For a nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. For occasional track days, set it to full stiff.5. CNC machined Aluminum top mounts & lockers--
- excellent strength, & save weight 6. Heavy Duty Steel Lower Mounts--- Highly Durable Reliable 7. Upgraded spring --- more than 600, 000 times continuously test to assure it's high tensile strength.8. All inserts come with fitted long rubber boots--- To protect the damper more well & be durable.9. With better damping setting, you will get better performance & comfort at the same time.10. Twin-Tube structure ---provides excellent handling control characteristics for most driving conditions 11. Corrosion Finish
- Anodized Aluminum & Powder Coated Carbon Steel Parts 12. Test for the best---Every parts were tested on our professional machine before assembled & tested by our professional racers on road.13. Clean room assembled---maintain higher level of accuracy & reliability.14. Upgraded damper oil---make damping more stable & smooth in wide temperature range.


















...

Applicationfor 1999-2005 model years & some 1997-2006 models for NPR for NPR HD for NQR for NRR Compatible for Chevy / Compatible for GMC W4500 Compatible for Chevy / Compatible for GMC W5500 Part Number 8-97364-074-0, 8963640740 Specification Position: Front Steering Column Package
Includes:: 1x Turn Signal Combination Switch Condition: New Warranty: one year for any manufacture defect Notice Please check the OEM Number before purchase. This is the best way to confirm the fitment. Instruction is not included. Professional installation is recommended Please feel free to contact us for whatever we can help.
...

Application 1995 Compatible compatible compatible for Range Rover 4.0L or 4.6L Engine
- Front 1996
- 2002 Compatible compatible

...

Application Compatible for 1963-72 C10 2-wheel drive Chevy p/u application Specification
Features: -New design. -Sheet
...

Application Compatible for Chevelle, GTO, 442, GP, compatible for Monte Carlo, Elcamino A-body 66-72 for Nova / Ventura / Compatible for Apollo / Compatible for Omega X-body 66-74 for fullsize, Impala 66-72 compatible for Cadillac 66-72 Specifications Warranty: one year warranty for any manufacturing defect Condition: New Quantity: 1 x Driver Side Mounting Bracket (as the piture shown) Featuresand Benefits Direct Fit Replacement Highest Quality Materials ...

Application Compatible for Nissan Murano 6 CYL 3.5L2009-2013 Does NOT fit Any Aftermarket Compressors Specifications Package Include: 1x Pulley With Bearing 1x Front Plate 1x Electromagnetic Coil Accessories: You will get exactly as shown in the picture above Condition: New Warranty: one year warranty for any manufacturing defect Notice* Professional installation is highly recommended (No Instruction Included) * For any needs please contact us ...

Application 2003 compatible for Acura MDX Base Sport Utility 4-Door 3.5L 3471CC V6 GAS SOHC Naturally Aspirated 2003 compatible for Acura MDX Touring Sport Utility 4-Door 3.5L 3471CC V6 GAS SOHC Naturally Aspirated 2004 compatible for Acura MDX Base Sport Utility 4-Door 3.5L 3471CC V6 GAS SOHC Naturally Aspirated 2004 compatible for Acura MDX Touring Sport Utility 4-Door 3.5L 3471CC V6 GAS SOHC Naturally Aspirated 2005 compatible for Acura MDX Base Sport Utility 4-Door 3.5L 3471CC V6 GAS SOHC Naturally Aspirated 2005 compatible for Acura MDX Touring Sport Utility 4-Door 3.5L 3471CC V6 GAS SOHC Naturally Aspirated 2006 compatible for Acura MDX Base Sport Utility 4-Door 3.5L 3471CC V6 GAS SOHC Naturally Aspirated 2006 compatible for Acura MDX Touring Sport Utility 4-Door 3.5L 3471CC V6 GAS SOHC Naturally Aspirated Specification OEM Part Number: 92552, 3402797, 37625, 55277, 5-55277, 36-365972 Condition: New Warranty: one year warranty for any manufacturing defect Accessories: You will get exactly as shown in the picture above This product is suitable for left-hand driving Note* Please confirm your old part number matches up with one of the part numbers above * Professional installation is highly recommended (No Instruction Included) * For any needs please contact us ...