Introduction MXR-B3 series (also called MXR-SLC) based on MXR-B2 series (also called MXR-SNA) coilovers, which is also height adjustable but adds damping adjustment ability by a knob on the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for TOYOTA ALTEZZA AS200 1998.10-2005.07JPN GXE10 compatible for TOYOTA ALTEZZA RS200 1998.10-2005.07JPNSXE10 compatible for LEXUS IS300 2000-2005 USA JCE10L （INCL SPORTS CROSS (5DR) ） Compatible for LEXUS IS 200 1999.4
- 2005.7 GXE10（INCL SPORTS CROSS (5DR) ） Compatible for TOYOTA MARK II 2000.10-2004.11 JPN JZX110 GRANDE IR-V, GRANDE G-TB compatible for TOYOTA MARK II BLIT 2002.01-2007.05JPN JZX110W 2.5IR-V, 2.5IR-SSpecification Top mounts: rubber top mounts Damping: 24 levels rebound damping adjustable Spring rate: front 12kg/mm Spring rate: rear 10kg/mm Adjustable

Height: Yes lowering 1'' to 3'' Shock type: Twin tube Spring preload: 7-10 mm
Colour: gold Package includedcomplete coilovers 2 front & 2 rear a pair wrench for height adjustment Dimensionweight: 24940g

Size: 71*51*21 cm Feature 1. Lowered height adjustment from 1''-3'' which allow lower center of gravity & also add a more aggressive stance 2. A 24 rebound damping adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. 3. Rubber top mounts help to deliver a smooth & forgiving ride for city use at any speed & rubber joints assist in absorbing hard impacts. 4. Twin-Tube structure allows sufficient stroke within the shock absorber 5. Separate height adjustment does not affect damper stroke 6. High Tensile performance spring – STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. 7. Height Adjustment tools included 8. Most pieces in our Coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components. 9. Full rebuildable Warranty: one year warranty for any manufacturing defect





...

Introduction MXR-B3 series (also called MXR-SLC) based on MXR-B2 series (also called MXR-SNA) coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for Honda S2000 BASE MODEL/TYPE V AP1/AP2 2000-2009 Specification Top mounts: Standard rubber top mount front & rear Adjustable camber plate: No Damping: 24 ways damping adjustable Spring rate Front: 10 kg/mm (560 lbs/in) Spring rate Rear: 10 kg/mm (560 lbs/in) Spring length Front: 180mm Spring length Rear: 230mm Adjustable

Height: lowering 1-3 inch Coilover overall length Front: 430mm-480mm Coilover overall length Rear: 515mm-580mm Shock type: Twin tube Spring preload: 7-10 mm
Colour: Golden Package includedcomplete coilovers 2 front & 2 rear as shown in the picture Dimension
Size: 63*51*21 cm Weight: 21.98kg Feature 1. Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance 2.24 levels of adjustable damper -- This allows you the ability to perfectly dial in your coilovers system. For a nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. For occasional track days, set it to full stiff. 3. Adjustable pre-load spring tension to reduce the shaking motion to a certain extent 4. Adjustable Camber Plate & Pillow ball top mount for sharpening steering response. (for some models) 5. CNC machined Aluminumtop mounts & lockers--
- excellent strength, & save weight 6. Heavy Duty Steel Lower Mounts--- Highly Durable & Reliable 7. High tensile spring---600, 000 times continuously test to assure it's high tensile strength. 8. All inserts come with fitted long rubber boots--- To protect the damper more well & be durable. 9. Twin-Tube structure ---provides excellent handling & control characteristics for most driving conditions 10. Corrosion Finish
- Anodized Aluminum & Powder Coated Carbon Steel Parts Warranty: one year warranty for any manufacturing defect






...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket adjustable coilovers suspension kit compatible for Toyota Corolla series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Toyota Corolla E90 E100 E110 AE92 AE101 AE111 1988-1999 Notice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Top mount: Front camber plate；rear pillow ball Quantity: 4PCS of Coilovers (2 piece front + 2 pieces rear) Adjustable damper: 24 ways adjustable damper force Adjustable camber plate: Yes（front only） Adjustable

Height: lowering 1-3 inch Spring rate front: 8 kg/mm (448 lbs/in) Spring rate rear: 6 kg/mm (336 lbs/in) Shock type: Twin tube Spring preload: 7-10 mm
Colour: Gloden Warranty: 1 year warranty for any manufacturing defect Daily driver, occasional autocross day or occasional track days，equally at home on street & track. For those seeking a lowered stance as well as enhanced handling & response at a high value. Feature- Able to lower ride height by 1''-3''; allows user to have a more aggressive stance.- Coilovers are 24-way adjustable. Rebound & Dampening adjustment which allows the user the ability to dial in your coilovers to any driving needs. The user can enjoy a comfortable riding experience in all road conditions.- Pillow ball top mount --- this design helps combat noise while tuning. It also improves the steering feel & response.- Twin-Tube Shock design is used for low internal frictional resistance in order to increase efficiency & keep shock temps low.- Height adjustment does not sacrifice damper stroke length.- These coilovers are able to have their height adjusted without being taken out of the car.- High Tensile strength performance spring---Tested under a 600, 000 time continuous compression test, the spring distortion was less than 0.04%. Plus, the special surface treatment improves the durability & performance.- Adjustment tools included in the kit. Notice- No instruction included; Professional installation & alignment suggested.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.



...

Application Compatible for Toyota Corolla 9th Gen. (E130) 2003-2008 USA Compatible for Toyota Corolla 9th Gen (_E12_) (01/2001-12/2007) other markets Compatible for Toyota Matrix XRS (E130) 2003-2008 Notice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Product included: 4PCS of Coilovers (2 piece front + 2 pieces rear) Adjustable damper: 24 ways adjustable damper force Spring rate front: 12kg/mm (672 lbs/in) Spring rate rear: 8 kg/mm (448 lbs/in) Height adjustable: Front: 347-457mm; Rear: 445-490mm Shock type: Twin tube Spring preload: 7-10 mm
Colour: Gloden Warranty: one year warranty for any manufacturing defect Daily driver, occasional autocross day or occasional track days, equally at home on street & track. For those seeking a lowered stance as well as enhanced handling & response at a high value. Feature- Rubber top mounts front & rear help to deliver a smooth & forgiving ride for city use at any speed, & rubber joints assist in absorbing hard impacts.- 24 levels of damping rebound adjustment allow you to perfectly dial in your coilover system for both handling & comfort.- Separate height adjustment without sacrifice of damper stroke without removing the coilover out from the car.- Dust boot included to protect damper seal.- Twin-Tube Structure --- For Low Resiliency Securing Sufficient Stroke.- High Tensile performance spring --- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. 6. Plus, the special surface treatment is to improve the durability & performance.- Most pieces in our Coilover systems, including mounts, collars & spring perches, are designed from 6061-T6.- Billet Aluminum resulting in lightweight, durable & rust resistant components.- Steel shock bodies are electroplated with Zinc for anti Anti-corrosion.- Full rebuildable.- Full Length Ride Height Adjustment. Notice- No instruction included; Professional installation alignment suggested.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.
...

Application Compatible For BMW 3 (E90) (2004-2011) 316i, 318i, 320i, 323i, 325i, 328i, 330i, 335i, 316d, 318d, 320d, 325d, 330d, 335d. Compatible For BMW 3 Touring (E91) (2004-2012) 316i, 318i, 320i, 323i, 325i, 328i, 330i, 335i, 316d, 320d, 325d, 330d, 335d. Note: 1) This product fit RWD vehicle only!2) We suggest adding washers to avoid the engine bar & drilling the front OE shock top mount upper part a little bigger to a diameter of 12mm. Specification Package included: Complete coilovers for 2 front & 2 reara pair wrench for height adjustment Top mounts: front
- pillow ball top mountsrear
- OE top mounts required Damping: 24 levels rebound damping adjustable Spring rate: front 10 Kg/mmrear 8 Kg/mm Adjustable

Height: Yes, lowering 1" to 3" Shock type: Twin tube Spring Preload: 7-10 mm
Colour: Gold Adjustable camber plate: No Warranty:1 year warranty for any manufacturing defect Feature- Able to lower ride height by 1''-3''; allows user to have a more aggressive stance.- Coilovers are 24-way adjustable. Rebound & Dampening adjustment which allows the user the ability to dial in your coilovers to any driving needs. The user can enjoy a comfortable riding experience in all road conditions.- Twin-Tube Shock design is used for low internal frictional resistance in order to increase efficiency & keep shock temps low.- Height adjustment does not sacrifice damper stroke length.- These coilovers are able to have their height adjusted without being taken out of the car.- High Tensile strength performance spring---Tested under a 600, 000 time continuous compression test, the spring distortion was less than 0.04%. Plus, the special surface treatment improves the durability & performance.- Adjustment tools included in the kit. Notice- Please double confirm before ordering.- No instruction included; Professional installation & alignment suggested.- Please check our store for other auto parts you may be interested in.- For any needs please contact us.




...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket adjustable coilovers suspension kit compatible for Chrysler & compatible for Dodge series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Chrysler 300C 5.7L V8 RWD, Sedan 2005-2010 Compatible for Chrysler 300C SRT8 6.1L V8, RWD, Sedan 2005-2010 Compatible for Chrysler 300S 5.7L V8 RWD, Sedan 2010 Compatible for Dodge Magnum R/T 5.7L V8, RWD, Wagon 2005-2008 Compatible for Dodge Magnum SRT8 6.1L V8, RWD, Wagon 2006-2008 Note: Chrysler 300 C require drilling the hole of the front OE top mount to fit. Specification Quantity:2 front+2 rear shocks 2 front springs+2 rear springs C- Spanner for adjustment Front Bump stops & dust covers. Spring Rate Front: 5 kg/mm (280 lbs/in) Spring Rate Rear: 9 kg/mm (504 lbs/in) Lowering Range:
- Rear Height Range: 1''-1.5'' / 26mm-36mm- Front Height Range: 1.2''-1.6'' / 30mm-40mm
Colour: Golden Height adjustable: Yes Warranty: one year for any manufacturing defect Features- Adjustable ride height- Adjustable pre-load spring tension- Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down.
- Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.- Improve your handling performance without sacrifice comfortable ride.- All inserts come with fitted rubber boots to protect the damper & keep clean.- A fast & affordable way to easily upgrade your car's appearance.- Easy installation with right tools.- Ideal for any track, drift & fast road & can also be used for daily driving. Notice- No Top Mount Included， Modification Required If You Use OE Top Mount- No instruction included; Professional installation alignment suggested.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.




...

Application 2012-2015 compatible for Hyundai Veloster (FS) Specification Quantity: 2 piece front + 2 pieces rear Spring rate Front: 8 kg/mm (448 in/lbs) Spring rate Rear: 6 kg/mm (336 in/lbs) Damper: 24 ways adjustable Damper Adjustable

Height: Yes Adjustable camber plate: Yes
Colour: Gold Warranty: one year warranty for any manufacturing defect Feature* Adjustable ride height. * Adjustable pre-load spring tension. * Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response. * Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down. * Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance. * All inserts come with fitted rubber boots to protect the damper & keep clean. * A fast & affordable way to easily upgrade your car's appearance. * Easy installation with right tools. Notice* No instruction included; Professional installation & alignment suggested. * Please check our store for other auto parts you may be interested in. * Please feel free to contact us for whatever we can help.



...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket adjustable coilovers suspension kit compatible for Ford & compatible for Volvo series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Focus 2gen/MK2 2008-2011 sedan/coupe（ Excludes 2.5ST )NOTE： Using the OE top mounts, the center bolt hole needs to be bored out Specification Quantity:
- 2 front+2 rear shocks- C- Spanner for adjustment- Front Bump stops & dust covers. Adjustable damper: Non Adjustable Damper Adjustable

Height: Yes
Colour: Golden Warranty: one year warranty for any manufacturing defect Features- Adjustable ride height- Adjustable pre-load spring tension- Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down.- Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.
- All inserts come with fitted rubber boots to protect the damper & keep clean.- Improve your handling performance without sacrifice comfortable ride.- A fast & affordable way to easily upgrade your car's appearance.- Easy installation with right tools.- Ideal for any track, drift & fast road & can also be used for daily driving. Notice- No instruction included; Professional installation is highly recommended.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.






...

Introduction MXR-SNA coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible for Toyota Corolla E90 1987–1992 Compatible for Toyota Corolla E100 1991–1998 Compatible for Toyota Corolla E110 1995-2002 Compatible for Toyota Corolla AE92 1987-1991 Compatible for Toyota Corolla AE101 1992-1998 Compatible for Toyota Corolla AE111 1988-2002 Notice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Top mount: Front camber plate；rear pillow ball Spring rate Front: 8 kg/mm (448 lbs/in) Spring rate Rear: 6 kg/mm (336 lbs/in) Adjustable

Height: lowering 1-3 inch Shock type: Twin tube Spring Preload: 7-10 mm
Colour: gold body with black spring Package included Complete coilover assembly kit for front & rear A pair wrench for height adjustment Note- No instruction included; Professional installation alignment suggested.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.


...

Introduction A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened
- lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper & a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket height adjustable coilovers suspension kit compatible for Lexus series. You can enjoy a comfortable riding experience in all road conditions. Application Compatible for Lexus LS400 XF10 1990-1994 Compatible for Toyota Celsior 1990-1994 Specification Quantity: 2 piece front + 2 pieces rear Spring rate Front: 9 kg/mm (504 lbs/in) Spring rate Rear: 10 kg/mm (560 lbs/in) Damper: Non adjustable damper Adjustable

Height: Yes Adjustable camber plate: No
Colour: Golden Warranty: one year warranty for any manufacturing defect Feature- Adjustable ride height.- Adjustable pre-load spring tension.- Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response.- Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down.- Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.
- All inserts come with fitted rubber boots to protect the damper & keep clean.- Improve your handling performance without sacrifice comfortable ride.- A fast & affordable way to easily upgrade your car's appearance.- Easy installation with right tools.- Ideal for any track, drift & fast road & can also be used for daily driving. Note- No instruction included; Professional installation is highly recommended.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.





...