United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
More From Contributor
Upgraded Turbocharger Compatible For Subaru Impreza STI TD05 20G EJ20
EJ25 2002-2006 7cm^2
IntroductionIt's a upgraded Turbo for advanced drivers. MXR TD05 20G Turbo customizes a unique specification that replaces the TD04 for a TD05H turbine wheel. Furthermore, MXR also enlarges the turbine housing area to 7 square cm to improve the exhaust efficiency. Don't hesitate to get a turbo to boost your car's power.Application compatible for Subaru IMPREZA STI EJ20 EJ25 engine 2002 - 2006SpecificationExhaust Outlet(Downpipe) Flange:5-Bolt FlangeTurbine Trim: 76.4Turbine Housing: 7cm²Turbine Inducer Diameter:56mmTurbine Exducer Diameter: 48.96mmCompressor Trim: 59.8Compressor Inducer Diameter: 52.6mmCompressor Exducer Diameter:67.9mmCompressor Housing Inlet OD: 57.8mmCompressor housing inlet ID:53.62mmCompressor housing outlet OD: 51.2mm, ID:41.2mm Oil Feed: M10*1.5Oil Drain:
2*M6*1.0Water In/Out: M14*1.5Bearing: Wet Float/Journal BearingCooling Type: Water + Oil cooledWarranty: one year for any manufacture defectsFeatures* Turbine housing uses ductile iron QT450-10 Can withstand temperatures up to 700℃.* Steel Turbine Wheel made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900℃.* Compressor housing: ZL104 aluminum.* Compressor wheel/blades:- Cast Aluminium with good gas tightness and corrosion resistance. * MAX HP: 420 HP.* 100% BALANCING TEST: VSR machine technology.Notice* Please check the specifications carefully before buying. If you are not sure about these information, please feel free to contact us.* All Wagon engines and automatic sedan engines came with a TD04, all manual sedans
including STI versions had a TD05. If your old turbo is TD04 one, some modification is required to fit the new turbo.* It's a direct bolt-on so nothing else would be required. But, to get it's full potential you'd need some additional upgrades. Intake, exhaust, more fuel, etc. it will also require custom tuning.* Professional installation is highly recommended(No Instruction Included)* All WRX Wagon engines and automatic sedan engines came with a TD04, all manual WRX sedans including STI versions had a TD05 model. If your original turbo is TD04 model, some modification(connections, bolts, fixed screws etc.) is required.
2*M6*1.0Water In/Out: M14*1.5Bearing: Wet Float/Journal BearingCooling Type: Water + Oil cooledWarranty: one year for any manufacture defectsFeatures* Turbine housing uses ductile iron QT450-10 Can withstand temperatures up to 700℃.* Steel Turbine Wheel made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900℃.* Compressor housing: ZL104 aluminum.* Compressor wheel/blades:- Cast Aluminium with good gas tightness and corrosion resistance. * MAX HP: 420 HP.* 100% BALANCING TEST: VSR machine technology.Notice* Please check the specifications carefully before buying. If you are not sure about these information, please feel free to contact us.* All Wagon engines and automatic sedan engines came with a TD04, all manual sedans
including STI versions had a TD05. If your old turbo is TD04 one, some modification is required to fit the new turbo.* It's a direct bolt-on so nothing else would be required. But, to get it's full potential you'd need some additional upgrades. Intake, exhaust, more fuel, etc. it will also require custom tuning.* Professional installation is highly recommended(No Instruction Included)* All WRX Wagon engines and automatic sedan engines came with a TD04, all manual WRX sedans including STI versions had a TD05 model. If your original turbo is TD04 model, some modification(connections, bolts, fixed screws etc.) is required.
Product Description
Reviews/Comments
Add New
Vouchers
No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Denmark